[Sammelthread] HDD-Probleme, SMART-Analysen

Inzersdorfer schrieb:
Die SATA Downshift Error Count (B7), die Reported Uncorrectable Errors (BB) und die Command Timeouts (BC) waren wohl alle die Folge der früheren 176 C5/C6. 8 ersetzte Sektoren sind wohl noch kein Beinbruch, ein Fehlerprovozieren der Seatools ist mir nicht geläufig.
Nach der Formatierung ist alles beim alten geblieben. Du meinst man kann das erst einmal ignorieren? Wie lange sollte ich die HDD im Auge behalten um halbwegs sicher zu sein, dass sie zuverlässig läuft?
 
Das machst du wie mit deinem Auto. Das behältst du solange im Auge, bis es dir geklaut wird, du es verkaufst oder verschrotten lässt. Ich nähme solche Werte bei neuen Platten nicht hin, aber das musst du wissen.
Zur Überwachung CDI mit Windows starten lassen, die Warnschwelle für 05 auf 9 setzen (gemäß dem letzten Screenshot) und abwarten.
 
Hallo Ihr,

ich habe heute eine SSD und eine neue 3TB Platte eingebaut. Windows neu Installiert und jetzt ist die 3TB Platte natürlich nicht voll da. Wie bekomme ich das unter WIn Vista geändert? Ich weiß das ich von MBR weg muss aber ich finde nix wie ich das ändern kann.

Hoffe es kann mir jemand helfen. Ich Google mich schon zu Tode...


Ich hab jetzt mal Partition Wizard gefunden mal gucken ob es klappt. Also mit dem Programm gehts nicht.

Womit kann ich das ändern? Ich bekomme bald einen Anfall!
 
Zuletzt bearbeitet:
Du solltest dringend auf Win7 updaten, da Vista erstens SSDs nicht ordentlich unterstützt, also auch kein TRIM bietet und weil der kostenlose Mainstream Support von Vista schon 2012 ausgelaufen ist, es gibt also nur noch bis April 2017 den kostenpflichtigen "Extended Support". Außerdem Vista nun wirklich zu recht nicht die beliebteste Version von Windows.

Zu Deinem Problem: Die Partitionierung hätte von Anfang an mit GPT gemacht werden müssen. Leider stellt auch Win7 bei HDDs über 2TB per default immer MBR ein und nicht GPT. Ein Weg die Partitionierung neu zu mache wäre den Sektor 0 mit DISPART und CLEAN zu löschen, Anleitungen dazu gibt es im Netz. Prüfe danach auch unbedingt, ob der Treiber mit der Kapazität fehlerfrei klar kommt. Lege also eine einzige große Partition über die 3TB an und teste diese komplett mit h2testw, wenn es keinen Fehler beim Lesen gibt, passt alles.
 
@BamLee2k
Mit welcher Größe wird die Platte denn in der Datenträgerverwaltung erkannt? Mit 746 GiB oder doch mit 3 TB, wobei nur die ersten 2 TiB nutzbar sind?
 
Hi Jungs,

was meint ihr hierzu?
 

Anhänge

  • jejls.jpg
    jejls.jpg
    525,4 KB · Aufrufe: 722
Screenshots macht man nicht mit der Kamera, Windows bietet da viel bessere Möglichkeiten die qualitativ bessere Screenshot ermöglichen und dann ziehe auch den Screen von CrystalDiskInfo so weit auf, dass alle Attribute und auch die Hex-Werte bzw. Rohwerte vollständig sichtbar sind und stelle nicht auf die Dezimale Anzeige der Rohwerte um, wenn es eine Seagate ist. Nimm die aktuelle Version von CDI!
 
@domii666
Wirf die HD-Tune Freeware von der Platte. Die ist vollkommen veraltet und total verbugt. So auch die gelben Markierungen in deinem Screenshot. Es wurden bei beiden Attributen überhaupt keine Fehler protokolliert und deshalb gibt es keinen Grund auf irgendein Problem hinzuweisen.

Genaueres zu der Platte kann man aber erst sagen, wenn alle Smart-Attribute zu sehen sind. Nimm hierfür, wie Holt schon vorgeschlagen hat, Crystal Disk Info.
 
Kann mir bitte jemand sagen wie es meinen Serverfestplatten geht? Auf diesen sind wichtige Daten drauf, von daher wäre eine relativ genaue Analyse nett.

Code:
[user@server ~]# smartctl -a /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.5.1.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HD103UI
Serial Number:    entfernt
LU WWN Device Id: 5 0000f0 03b234510
Firmware Version: 1AA01113
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3b
Local Time is:    Mon Mar 24 12:31:24 2014 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (16181) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 271) minutes.
Conveyance self-test routine
recommended polling time:        (  28) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   073   073   011    Pre-fail  Always       -       8870
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       73
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   100   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   100   100   015    Pre-fail  Offline      -       10522
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       13311
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       73
 13 Read_Soft_Error_Rate    0x000e   100   100   000    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   060   050   000    Old_age   Always       -       40 (Min/Max 37/40)
194 Temperature_Celsius     0x0022   060   050   000    Old_age   Always       -       40 (Min/Max 37/41)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       69366
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12629         -
# 2  Short offline       Completed without error       00%     10765         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[user@server ~]# smartctl -a /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.5.1.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K1000.C
Device Model:     Hitachi HDS721010CLA332
Serial Number:    entfernt
LU WWN Device Id: 5 000cca 35dd986c8
Firmware Version: JP4OA39C
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon Mar 24 12:31:28 2014 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (10399) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 173) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   097   097   016    Pre-fail  Always       -       393216
  2 Throughput_Performance  0x0005   133   133   054    Pre-fail  Offline      -       104
  3 Spin_Up_Time            0x0007   121   121   024    Pre-fail  Always       -       312 (Average 311)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       63
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       81
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   132   132   020    Pre-fail  Offline      -       34
  9 Power_On_Hours          0x0012   096   096   000    Old_age   Always       -       28197
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       63
192 Power-Off_Retract_Count 0x0032   099   099   000    Old_age   Always       -       1765
193 Load_Cycle_Count        0x0012   099   099   000    Old_age   Always       -       1765
194 Temperature_Celsius     0x0002   136   136   000    Old_age   Always       -       44 (Min/Max 20/68)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       87
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 226 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 226 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 6c 5f 20 7c 00  Error: UNC at LBA = 0x007c205f = 8134751

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 28 cb 21 7c 40 08  30d+12:47:38.902  READ FPDMA QUEUED
  60 80 20 4b 21 7c 40 08  30d+12:47:38.902  READ FPDMA QUEUED
  60 80 18 cb 20 7c 40 08  30d+12:47:38.900  READ FPDMA QUEUED
  60 80 10 4b 20 7c 40 08  30d+12:47:38.900  READ FPDMA QUEUED
  60 80 08 cb 22 7c 40 08  30d+12:47:38.900  READ FPDMA QUEUED

Error 225 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 6c 5f 20 7c 00  Error: UNC at LBA = 0x007c205f = 8134751

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 f0 4b aa 7c 40 08  30d+12:47:18.824  READ FPDMA QUEUED
  60 80 e8 cb aa 7c 40 08  30d+12:47:18.824  READ FPDMA QUEUED
  60 80 e0 4b ab 7c 40 08  30d+12:47:18.824  READ FPDMA QUEUED
  60 80 d8 cb ab 7c 40 08  30d+12:47:18.823  READ FPDMA QUEUED
  60 80 d0 4b ac 7c 40 08  30d+12:47:18.823  READ FPDMA QUEUED

Error 224 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 6c 5f 20 7c 00  Error: UNC at LBA = 0x007c205f = 8134751

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 e8 cb b2 7c 40 08  30d+12:46:59.108  READ FPDMA QUEUED
  60 80 e0 4b b2 7c 40 08  30d+12:46:59.107  READ FPDMA QUEUED
  60 80 d8 cb b1 7c 40 08  30d+12:46:59.100  READ FPDMA QUEUED
  60 80 80 4b b1 7c 40 08  30d+12:46:59.095  READ FPDMA QUEUED
  60 80 78 cb b0 7c 40 08  30d+12:46:59.092  READ FPDMA QUEUED

Error 223 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 6c 5f 20 7c 00  Error: UNC at LBA = 0x007c205f = 8134751

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 48 cb a9 7c 40 08  30d+12:46:39.142  READ FPDMA QUEUED
  60 80 50 4b a9 7c 40 08  30d+12:46:35.273  READ FPDMA QUEUED
  60 80 58 cb a8 7c 40 08  30d+12:46:35.272  READ FPDMA QUEUED
  60 80 60 4b a8 7c 40 08  30d+12:46:35.269  READ FPDMA QUEUED
  60 80 68 cb a7 7c 40 08  30d+12:46:35.265  READ FPDMA QUEUED

Error 222 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 6c 5f 20 7c 00  Error: UNC at LBA = 0x007c205f = 8134751

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 a8 cb 2e 7c 40 08  30d+12:46:12.396  READ FPDMA QUEUED
  60 80 a0 4b 2e 7c 40 08  30d+12:46:12.395  READ FPDMA QUEUED
  60 80 98 cb 2d 7c 40 08  30d+12:46:12.390  READ FPDMA QUEUED
  60 80 90 4b 2d 7c 40 08  30d+12:46:12.390  READ FPDMA QUEUED
  60 80 88 cb 2c 7c 40 08  30d+12:46:12.384  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     14471         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[user@server ~]#
 
Unter der Prämisse Serverplatte mit erhöhtem Sicherheitsbedürfnis:

SAMSUNG HD103UI: in Ordnung.

Hitachi Deskstar 7K1000.C: sollte beizeiten ersetzt werden, da 81 wiederzugewiesene Sektoren auf
mögliche Oberflächenfehler hinweisen können, was weitere nicht lesbare Sektoren zur Folge hätte.
 
Guten Abend, ich habe ebenfalls Probleme mit einer meiner Festplatten (oder beiden?).

Seit Heute bekomme ich beim laden des Betriebssystems diese "a disk error occured, press ctrl+alt+del to restart" Meldung. Wenn ich dann bei dem BootBildschirm auf Pause drücke und die Winrepair (oder so ähnlich) Taste drücke, startet Windows danach ganz normal und ich kann auch ohne Probleme zocken/arbeiten usw, jedoch habe ich beim nächsten mal booten wieder den disk error Fehler. Das Problem hatte ich imho schonmal vor einem halben Jahr, dann ging es aber auf einmal wieder und es lief wie gewohnt.

Die Festplattem sind Caviar Black, eine 500GB sowie eine 1TB. Beide Anfang 2011 gekauft.

Mein System:
AMD Phenom II X4 965
AMD Radeon 6970 HD
Gigabyte GA-880GA-UD3H
8GB DDR3 Ram
Win7

Von CDI hab ich schon mal Screenshots gemacht, auch wenn mir das ganze nicht viel sagt. :/
D.pngC und F.png

Kann man das noch irgendwie beheben oder muss ich jetzt jedes mal rumwurschteln bis Win7 startet, bzw. schnell zusehen das ich Ersatz bekomme und die betreffende Festplatte schnell spiegeln/kopieren bevor sie den Geist aufgibt? :(
 
Danke für die genaue Analyse!
Inzersdorfer schrieb:
Unter der Prämisse Serverplatte mit erhöhtem Sicherheitsbedürfnis:
Ja, leider bin ich aber ausgesprochen geizig und mehr war nicht drin. :D Auch wenn ich dazu sagen muss, dass es heute fast normal ist Desktopfestplatten in Servern zu verwenden, selbst mein alter Hosteurope Server hatte nur solche drin.

Inzersdorfer schrieb:
Hitachi Deskstar 7K1000.C: sollte beizeiten ersetzt werden, da 81 wiederzugewiesene Sektoren auf
mögliche Oberflächenfehler hinweisen können, was weitere nicht lesbare Sektoren zur Folge hätte.
Reicht das den bei den meisten Providern schon um eine neue Platte zu fordern?
Ergänzung ()

Sorry, ich noch einmal. Könntest Du Inzersdorfer mir auch sagen wie es um diese Platten steht?

Code:
[aza@srv6 ~]# smartctl -a /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.3.1.el6.x86_64] (local b                                                                                                                                                             uild)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K2000
Device Model:     Hitachi HDS722020ALA330
Serial Number:    -
LU WWN Device Id: 5 000cca 222e7477c
Firmware Version: JKAOA3MA
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon Mar 24 19:27:57 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command                                                                                                                                                              from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (22183) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off supp                                                                                                                                                             ort.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 370) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_                                                                                                                                                             FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -                                                                                                                                                                    0
  2 Throughput_Performance  0x0005   132   132   054    Pre-fail  Offline      -                                                                                                                                                                    103
  3 Spin_Up_Time            0x0007   120   120   024    Pre-fail  Always       -                                                                                                                                                                    605 (Average 602)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                    42
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -                                                                                                                                                                    0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -                                                                                                                                                                    0
  8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -                                                                                                                                                                    35
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -                                                                                                                                                                    18403
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -                                                                                                                                                                    0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                    40
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                    45
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                    45
194 Temperature_Celsius     0x0002   187   187   000    Old_age   Always       -                                                                                                                                                                    32 (Min/Max 19/41)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                    0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -                                                                                                                                                                    0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -                                                                                                                                                                    0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -                                                                                                                                                                    0

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[aza@srv6 ~]# smartctl -a /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.3.1.el6.x86_64] (local b                                                                                                                                                             uild)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K2000
Device Model:     Hitachi HDS722020ALA330
Serial Number:    -
LU WWN Device Id: 5 000cca 221cbc50d
Firmware Version: JKAOA20N
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon Mar 24 19:28:40 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command                                                                                                                                                              from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (22771) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off supp                                                                                                                                                             ort.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 380) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_                                                                                                                                                             FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -                                                                                                                                                                    65536
  2 Throughput_Performance  0x0005   133   133   054    Pre-fail  Offline      -                                                                                                                                                                    101
  3 Spin_Up_Time            0x0007   118   118   024    Pre-fail  Always       -                                                                                                                                                                    613 (Average 614)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                    220
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -                                                                                                                                                                    1
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -                                                                                                                                                                    0
  8 Seek_Time_Performance   0x0005   112   112   020    Pre-fail  Offline      -                                                                                                                                                                    39
  9 Power_On_Hours          0x0012   096   096   000    Old_age   Always       -                                                                                                                                                                    29585
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -                                                                                                                                                                    0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                    220
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                    544
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -                                                                                                                                                                    544
194 Temperature_Celsius     0x0002   206   206   000    Old_age   Always       -                                                                                                                                                                    29 (Min/Max 21/41)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -                                                                                                                                                                    1
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -                                                                                                                                                                    0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -                                                                                                                                                                    0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -                                                                                                                                                                    122

SMART Error Log Version: 1
ATA Error Count: 166 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 166 occurred at disk power-on lifetime: 18663 hours (777 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle                                                                                                                                                             .

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 e0 10 91 df 00  Error: ICRC, ABRT at LBA = 0x00df9110 = 14651664

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 40 10 b0 90 df 40 00  23d+22:10:14.343  READ FPDMA QUEUED
  60 54 08 7f 89 df 40 00  23d+22:10:14.088  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00  23d+22:10:10.672  CHECK POWER MODE
  b0 da 00 00 4f c2 00 00  23d+22:09:51.705  SMART RETURN STATUS
  e5 00 00 00 00 00 00 00  23d+22:09:51.704  CHECK POWER MODE

Error 165 occurred at disk power-on lifetime: 18663 hours (777 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle                                                                                                                                                             .

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 90 70 15 00 00  Error: ICRC, ABRT at LBA = 0x00001570 = 5488

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 00 16 00 40 00  23d+19:41:22.734  READ FPDMA QUEUED
  60 00 00 00 14 00 40 00  23d+19:41:22.734  READ FPDMA QUEUED
  60 00 f8 00 12 00 40 00  23d+19:38:37.575  READ FPDMA QUEUED
  60 00 f0 00 10 00 40 00  23d+19:38:37.567  READ FPDMA QUEUED
  60 00 e8 00 0e 00 40 00  23d+19:38:37.485  READ FPDMA QUEUED

Error 164 occurred at disk power-on lifetime: 18663 hours (777 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle                                                                                                                                                             .

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 90 70 07 00 00  Error: ICRC, ABRT at LBA = 0x00000770 = 1904

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 a0 00 10 00 40 00  23d+19:38:36.172  READ FPDMA QUEUED
  60 00 98 00 06 00 40 00  23d+19:38:36.090  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00  23d+19:38:36.008  READ LOG EXT
  60 00 90 00 10 00 40 00  23d+19:38:35.338  READ FPDMA QUEUED
  60 00 88 00 0e 00 40 00  23d+19:38:35.220  READ FPDMA QUEUED

Error 163 occurred at disk power-on lifetime: 18663 hours (777 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle                                                                                                                                                             .

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 30 d0 06 00 00  Error: ICRC, ABRT at LBA = 0x000006d0 = 1744

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 90 00 10 00 40 00  23d+19:38:35.338  READ FPDMA QUEUED
  60 00 88 00 0e 00 40 00  23d+19:38:35.220  READ FPDMA QUEUED
  60 00 80 00 0c 00 40 00  23d+19:38:35.220  READ FPDMA QUEUED
  60 00 78 00 0a 00 40 00  23d+19:38:35.220  READ FPDMA QUEUED
  60 00 70 00 08 00 40 00  23d+19:38:35.219  READ FPDMA QUEUED

Error 162 occurred at disk power-on lifetime: 18663 hours (777 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle                                                                                                                                                             .

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 90 60 91 df 00  Error: ICRC, ABRT at LBA = 0x00df9160 = 14651744

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 40 10 b0 90 df 40 00  23d+18:43:54.906  READ FPDMA QUEUED
  60 54 08 7f 89 df 40 00  23d+18:43:54.662  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00  23d+18:43:51.247  CHECK POWER MODE
  b0 da 00 00 4f c2 00 00  23d+18:43:32.432  SMART RETURN STATUS
  e5 00 00 00 00 00 00 00  23d+18:43:32.431  CHECK POWER MODE

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[aza@srv6 ~]#

Danke.
 
@Koon: auf der C: sind nur Lesefehler sichtbar die aber nicht aktuell zu sein scheinen.
Das könnte eher auf ein Problem/Fehler des Filesystems hinweisen:
Mit eingelegtem Windows Datenträger einmal ein sfc /scannow in einer mit
Admin-Rechten gestarteter Konsole ausführen.

@Trow:
Hitachi Deskstar 7K2000, LU WWN Device Id: 5 000cca 222e7477c: gut.
Hitachi Deskstar 7K2000, LU WWN Device Id: 5 000cca 221cbc50d: gut
(die CRC Fehler und Lesefehler waren zuletzt bei 18.663 Betriebsstunden)
 
Zuletzt bearbeitet:
also bis vor ein paar tagen war da nur ein schreibfehler, heute schon 3,
wie ernst muß ich das nehmen und welche schreibfehler werden da aufgeführt?
oder muß ich mir erst sorgen machen, wenn sich die sektoren ändern?

sLVQdZH.jpg
 
Das sind Schreibfehler aufgrund eines mechanischen Problems der Schreib/Lese-Köpfe,
(z.Bsp. zu großer Abstand von der Platte) 3 sind allerdings noch nicht besorgniserregend.
 
@Koon, die eine Platte hat 11 Ultra-DMA CRC Fehler, die auf Probleme mit dem SATA Kabel schließen lassen, aber das kann auch schon länger zurückliegen und inzwischen behoben sein. Achte also regelmäßig darauf, ob der Rohwert von C7 steigt und wenn ja, dann prüfe das SATA Kabel auf festen Sitz und tausche es ggf. aus.
 
@Inzersdorfer danke auch für diese Analyse. Ein Freund von mir hat heute seinen neuen Softlayer-Server bekommen auf dem ich gerade ein RAID 5 eingerichtet habe und ich wollte jetzt (schon wieder) fragen ob du dir die Platten mal ansehen kannst? Es handelt sich um ein Produktivsystem - auch wenn nur Greens drauf laufen - von daher wäre eine so eine genau Analyse wie bei den letzten beiden male sehr nett. :)

Code:
root@localhost:~# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD10EARX-00N0YB0
Serial Number:    -
LU WWN Device Id: 5 0014ee 2b147822a
Firmware Version: 51.0AB51
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar 25 17:37:33 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (18600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 182) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x30b5) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   116   113   021    Pre-fail  Always       -       7191
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       20
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       11297
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       18
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       17
193 Load_Cycle_Count        0x0032   189   189   000    Old_age   Always       -       35032
194 Temperature_Celsius     0x0022   120   115   000    Old_age   Always       -       27
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@localhost:~# smartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD10EARX-00N0YB0
Serial Number:    -
LU WWN Device Id: 5 0014ee 2069c9f35
Firmware Version: 51.0AB51
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar 25 17:37:56 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (19200) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 188) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x30b5) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   118   118   021    Pre-fail  Always       -       7066
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       20
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   083   083   000    Old_age   Always       -       12508
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       18
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       17
193 Load_Cycle_Count        0x0032   189   189   000    Old_age   Always       -       34424
194 Temperature_Celsius     0x0022   121   115   000    Old_age   Always       -       26
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@localhost:~# smartctl -a /dev/sdc
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD10EARX-00N0YB0
Serial Number:    -
LU WWN Device Id: 5 0014ee 25bf1bc7f
Firmware Version: 51.0AB51
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar 25 17:38:10 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (18900) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 185) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x30b5) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   114   114   021    Pre-fail  Always       -       7266
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       20
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   083   083   000    Old_age   Always       -       12481
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       18
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       17
193 Load_Cycle_Count        0x0032   188   188   000    Old_age   Always       -       36875
194 Temperature_Celsius     0x0022   121   114   000    Old_age   Always       -       26
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@localhost:~# smartctl -a /dev/sdd
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD10EARX-00N0YB0
Serial Number:    -
LU WWN Device Id: 5 0014ee 2069c9f17
Firmware Version: 51.0AB51
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar 25 17:38:26 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (18660) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 183) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x30b5) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   117   115   021    Pre-fail  Always       -       7116
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       23
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       4855
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       21
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       20
193 Load_Cycle_Count        0x0032   188   188   000    Old_age   Always       -       36707
194 Temperature_Celsius     0x0022   121   112   000    Old_age   Always       -       26
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@localhost:~#
 
Die Beurteilung dieser Platten ist aber wirklich keine Kunst,
sie sind alle in einem nachgeradezu obszön guten Zustand.
 
Inzersdorfer schrieb:
Das sind Schreibfehler aufgrund eines mechanischen Problems der Schreib/Lese-Köpfe,
(z.Bsp. zu großer Abstand von der Platte) 3 sind allerdings noch nicht besorgniserregend.
mechanisches problem hört sich aber nicht vertrauenserweckend an,
ab welchen werten sollte ich denn lieber wechseln? immerhin ist sie ja fast neu..
 
Zurück
Oben