ich glaube eher, ihr habt keine Ahnung was eine Poker II überhaupt ist, beziehungsweise kann:
Programming Instruction
1. Press PMode(FN + Right CTRL) to enter the programming mode (Spacebar right LED flashing)
2. Press the key you want to program ( Spacebar right LED on)
3. Key in the programming content and then press PN ( Spacebar right LED flashing again)
4. Repeat step 2 and step 3 to program other keys
5. Press PMode(FN + Right CTRL) to exit programming mode ( Spacebar right LED off)
Note:
· Support FN layer programming, you can select the FN combination key (e.g., FN + A) to program
it
· Under SELECT state (step 1), you can press PN + any key to view its content in a word
processing software (e.g., Notepad)
· Support time delay, press 15ms key(FN + F) each time to delay 15ms, press 0.1s key(FN + G)
each time to delay 0.1s, press 0.5s key(FN + H) each time to delay 0.5s. Consecutive delay will
add up but will only be counted as 1 key stroke
· Every key can program up to 14 key strokes
· If there is no key pressed for 15 sec in programming mode, it will exit to normal mode
Programming Usage
Press PN + Programmed key, OR
Press Toggle(FN+Right SHIFT) to light up the spacebar left LED first. Then press the programmed key
directly. If you press PN + Programmed key at this moment, it will output the original key code.
Programming Examples
1. Program A as 123: FN + Right CTRL, A, 1, 2, 3, PN
2. Continue to program FN + A as 456: FN + A, 4, 5, 6, PN
3. Continue to program B as CTRL + C: B, CTRL(Not release), C, Release CTRL and C, PN
4. Continue to program C invoking CMD under WIN7: WIN, C, FN + G, M, FN + G, D, FN + H,
ENTER, PN
5. Finish programming: FN + Right CTRL
6. Invoking programmed A: PN + A => Output 123
7. Invoking programmed FN + A: PN + FN+ A => Output 456
8. Invoking programmed C: PN + C => Running CMD.EXE
9. Switch to PN layer: Toggle(FN + Right SHIFT) => Spacebar left LED on
(1) Invoking programmed B: B => Outpu CTRL + C (Same as copy)
(2) Invoking programmed FN + A: FN+ A => Output 456(No need to press PN)
(3) Invoking programmed C: C=> Running CMD.EXE
(4) If you need to get the A back (Now pressing A is 123): PN + A => A
Restore to factory default
Press and hold FN + R, Spacebar left LED is flashing after 3 sec. Continue to hold FN + R until the
Spacebar left LED flashes for 9 times will restore to factory default
http://www.google.de/url?sa=t&rct=j...=Nk4EgazgsccKGXzEuKYviA&bvm=bv.71954034,d.bGQ
