ST3000DM001-9YN166 headcrash ? diverse Sektoren kaputt, noch sinnvoll nutzbar ?

Status
Für weitere Antworten geschlossen.

Sensei21

Commander
Registriert
März 2002
Beiträge
2.680
Hi,


nachdem die Platte (ST3000DM001-9YN166) längere Zeit in einem externen Gehäuse saß, über das man keinen Zugriff auf auf die S.M.A.R.T.-Werte hatte,

entschloss ich mich sie endlich umzupflanzen und das Resultat ist Folgendes:

smartctl -a /dev/sdf
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.2-fixes+] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-9YN166
Serial Number: W1F0FFFM
LU WWN Device Id: 5 000c50 049827d9a
Firmware Version: CC4H
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Sep 16 01:39:08 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 331) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 088 088 006 Pre-fail Always - 17908552
3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 162
5 Reallocated_Sector_Ct 0x0033 087 087 036 Pre-fail Always - 17120
7 Seek_Error_Rate 0x000f 043 043 030 Pre-fail Always - 5592073196707
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 839
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 122
183 Runtime_Bad_Block 0x0032 097 097 000 Old_age Always - 3
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2 2 2
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 054 047 045 Old_age Always - 46 (Min/Max 24/46)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 27
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 948
194 Temperature_Celsius 0x0022 046 053 000 Old_age Always - 46 (0 18 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 8
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 493h+25m+52.744s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 71002435194331
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 275879871029531

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 838 -
# 2 Short offline Completed without error 00% 800 -
# 3 Short offline Completed without error 00% 796 -
# 4 Short offline Completed: read failure 10% 794 631875191
# 5 Short offline Completed without error 00% 793 -
# 6 Conveyance offline Completed without error 00% 792 -
# 7 Short offline Completed without error 00% 778 -
# 8 Short offline Completed without error 00% 719 -
# 9 Extended offline Completed without error 00% 686 -
#10 Conveyance offline Completed without error 00% 642 -
#11 Short offline Completed without error 00% 627 -
#12 Short offline Completed without error 00% 609 -
#13 Short offline Completed without error 00% 559 -
#14 Short offline Completed without error 00% 542 -
#15 Extended offline Completed without error 00% 517 -
#16 Short offline Completed without error 00% 504 -
#17 Short offline Completed without error 00% 496 -
#18 Short offline Completed without error 00% 37 -
#19 Extended offline Completed without error 00% 35 -
#20 Extended offline Aborted by host 90% 29 -
#21 Extended offline Aborted by host 90% 20 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Bereits im ersten externen Gehäuse gab es Geräusche, die danach klangen als wenn ein Headcrash (?) oder zumindest Sektoren-Umverteilung im Gange gewesen waren


ein zpool scrub hat die Platte in beiden Gehäusen nicht überlebt - es gab timeouts (ist über USB 3.0 verbunden)


momentan starte ich einen neuen Versuch und hab einmal die Platte mit Btrfs formatiert und kopiere probehalber Daten darauf


ID #183
hat sich von so ziemlich am Anfang des Kopiervorganges von

5 Reallocated_Sector_Ct 0x0033 087 087 036 Pre-fail Always - 17048

auf mittlerweile

5 Reallocated_Sector_Ct 0x0033 087 087 036 Pre-fail Always - 17120


erhöht


vom Gefühl her würde ich keine wertvollen Daten oder zumindest kein Betriebssystem mehr (z.B. weiteres Windows) mehr darauf installieren


was meint Ihr ?


Danke :D
 
auch wenn ich fürchte, dass ich mir die frage sparen kann - garantie? ich persönlich würde dieser platte nicht mehr über den weg trauen, leider. und natürlich schon gar nicht, wenns um "wichtige" daten geht. no-go. du kannst ja quasi beim zerfall zuschauen.
 
Die Garantie ist leider vor kurzem abgelaufen und der Shop, wo ich die Platte gekauft hatte, gibt es so in der Form nicht mehr (DiTech),

vom neuen Eigentümer wird sie wohl, glaub ich, auch nicht übernommen


na gut - dann mach ich einfach ein paar Experimente damit und schau, wie gut das System, externes Gehäuse und Dateisystem damit zurechtkommen


Danke Cai-pirinha :)
 
das ist natürlich sehr ärgerlich.

kein problem, sicherlich werden noch ein paar andere user ihre meinung dazu äußern. ich habe nur schon mehrmals bekanntschaft mit lebensmüden platten machen dürfen, und sowas ist einfach nur ärgerlich. wenn man es früh genug erkennt (wie du jetzt eben), dann sollte man einfach die chance nutzen und rechtzeitig umsteigen. auch wenn das wieder zeit und geld kostet - wenns dann zu spät war, ärgert man sich umso mehr, und um die investition kommt man ja doch nicht drumrum. immerhin scheint es sich bei dir ja nicht um eine essentielle platte zu handeln, von daher.. okay ;)

habe gerade mal für dich bei seagate gecheckt, leider hast du für die platte auch keine herstellergarantie mehr. hatte schon mal das glück, dass ich eine HDD (war auch seagate) nur nach holland schicken musste, bekam dann eine neue per express.
 
Status
Für weitere Antworten geschlossen.
Zurück
Oben