Hallo,
ich hoffe, hier kann mir jemand helfen...
Erst mal, das ist mein System:
Seit heute ist - quasi aus heiterem Himmel - die zweite meiner beiden Samsung-Festplatten total in die Knie gegangen. Hier die beiden Platten im Verleich (mit HD-Tune):
Festplatte 1:
Festplatte 2:
Diverse Neustarts haben kein Ergebnis gezeigt, auch die Kabel habe ich auf festen Sitz überprüft. Hat jemand eine Idee?
Herzlichen Gruß
Sven
ich hoffe, hier kann mir jemand helfen...
Erst mal, das ist mein System:
SiSoftware Sandra
Prozessor
Modell : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
Geschwindigkeit : 1.90GHz
Leistungsbewertung : PR6474 (geschätzt)
Kerne pro Prozessor : 2 Einheit(en)
Threads pro Kern : 1 Einheit(en)
Typ : Dual-Core
Interner Datencache : 2x 32kB Synchron, Write-Thru, 8-weg Satz, 64 Byte Zeilengröße
L2 Onboard Cache : 1x 2MB ECC Synchron, ATC, 8-weg Satz, 64 Byte Zeilengröße, 2 geteilte Threads
Mainboard
Bus(se) : ISA PCI PCIe IMB USB FireWire/1394 i2c/SMBus
MP Unterstützung : 1 Prozessor(en)
MP APIC : Ja
System BIOS : Phoenix Technologies, LTD 6.00 PG
Mainboard : http://www.abit.com.tw/ AB9/AB9RPO(Intel965+ICH8)
Gesamtspeicher : 2GB DDR2-SDRAM
Chipsatz 1
Modell : Abit Computer Corp P965/G965 Memory Controller Hub
Front Side Bus Geschwindigkeit : 4x 272MHz (1088MHz Datenrate)
Gesamtspeicher : 2GB DDR2-SDRAM
Speicherbusgeschwindigkeit : 4x 204MHz (816MHz Datenrate)
Grafiksystem
Desktopmonitore/TFTs : 2
Monitor/TFT : Plug und Play-Monitor
Monitor/TFT : Plug und Play-Monitor
Adapter : Radeon X1650 Series
Adapter : Radeon X1650 Series Secondary
Imaging Device : Canon MP600
Imaging Device : EPSON Perfection 2400
Physische Speichergeräte
Auswechselbares Laufwerk : Diskettenlaufwerk
Festplatte : SAMSUNG SP2504C (233GB)
Festplatte : SAMSUNG SP2504C (233GB)
Festplatte : Generic-Compact Flash USB Device
Festplatte : Generic-MS/MS-Pro USB Device
Festplatte : Generic-SD/MMC USB Device
Festplatte : Generic-SM/xD-Picture USB Device
Festplatte : Canon MP600Storage USB Device
CD-ROM/DVD : TSSTcorp CD/DVDW SH-S183A (CD 48X Rd, 48X Wr) (DVD 6X Rd, 6X Wr)
CD-ROM/DVD : HL-DT-ST DVD-ROM GDR8164B SCSI CdRom Device
Betriebssystem
Windowssystem : Microsoft Windows XP/2002 Home 5.01.2600 (Service Pack 2)
Netzwerkdienste
Adapter : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
Seit heute ist - quasi aus heiterem Himmel - die zweite meiner beiden Samsung-Festplatten total in die Knie gegangen. Hier die beiden Platten im Verleich (mit HD-Tune):
Festplatte 1:
HD Tune: SAMSUNG SP2504C Benchmark
Transfer Rate Minimum : 4.7 MB/sec
Transfer Rate Maximum : 67.9 MB/sec
Transfer Rate Average : 55.8 MB/sec
Access Time : 14.3 ms
Burst Rate : 125.1 MB/sec
CPU Usage : 4.6%
HD Tune: SAMSUNG SP2504C Information
Firmware version : VT100-50
Serial number : S09QJ1RP104019
Capacity : 232.9 GB (~250.1 GB)
Buffer size : 8192 KB
Standard : ATA/ATAPI-7 - SATA II
Supported mode : UDMA Mode 7 (Ultra ATA/512)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : yes
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Management: yes
Power Management : yes
Advanced Power Management : no
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Festplatte 2:
HD Tune: SAMSUNG SP2504C Benchmark
Transfer Rate Minimum : 1.8 MB/sec
Transfer Rate Maximum : 3.7 MB/sec
Transfer Rate Average : 3.6 MB/sec
Access Time : 14.2 ms
Burst Rate : 3.7 MB/sec
CPU Usage : 50.7%
HD Tune: SAMSUNG SP2504C Information
Firmware version : VT100-50
Serial number : S09QJ1RP104014
Capacity : 232.9 GB (~250.1 GB)
Buffer size : 8192 KB
Standard : ATA/ATAPI-7 - SATA II
Supported mode : UDMA Mode 7 (Ultra ATA/512)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : yes
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Management: yes
Power Management : yes
Advanced Power Management : no
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Diverse Neustarts haben kein Ergebnis gezeigt, auch die Kabel habe ich auf festen Sitz überprüft. Hat jemand eine Idee?
Herzlichen Gruß
Sven