Hallo, ich würde gern bei meinem 2. Rechner 3 Monitore betreiben. Das Board was ich habe, ASRock N68C-S UCC hat eine VGA Karte On Board und ich habe zusätzlich noch eine Nvidia 260 PCI-E eingebaut. Nun kann ich im Bios folgende Einstellungen machen,
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. The default value of this future is (PCI). Configuration options: (PCI), (Onboard) and (PCI-Express).
Nun habe ich folgendes versucht, ich habe 2x ACER 19´Monitore an die PCI-Express Karte angeschlossen und einen 15´Monitor an den VGA-Anschluss Onboard. Haut allerdings nicht hin, stelle ich die Configuration auf PCI oder PCI-Express, bleibt der 15´Monitor dunkel. Was ich gern erreichen möchte ist folgende Configuration
15´Monitor an PCI-Express
1x 19´Acer an VGA Onboard
1X 19´ Acer an PCI-Express
Noch schöner wäre es, wenn ich noch einen 4. Monitor mit Hilfe eines Y-Kabels anschließen könnte. Ich brauche da wirklich mal Eure Hilfe. Danke im voraus.
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. The default value of this future is (PCI). Configuration options: (PCI), (Onboard) and (PCI-Express).
Nun habe ich folgendes versucht, ich habe 2x ACER 19´Monitore an die PCI-Express Karte angeschlossen und einen 15´Monitor an den VGA-Anschluss Onboard. Haut allerdings nicht hin, stelle ich die Configuration auf PCI oder PCI-Express, bleibt der 15´Monitor dunkel. Was ich gern erreichen möchte ist folgende Configuration
15´Monitor an PCI-Express
1x 19´Acer an VGA Onboard
1X 19´ Acer an PCI-Express
Noch schöner wäre es, wenn ich noch einen 4. Monitor mit Hilfe eines Y-Kabels anschließen könnte. Ich brauche da wirklich mal Eure Hilfe. Danke im voraus.