Clock Chip Control
Standard Clock Control
CPU Host Clock Control: 		[Enabled]
CPU Host Frequency (Mhz): 		3768
PCI Express Frequency (Mhz):		100

C.I.A.2: 				[Disabled]

Advanced Clock Control [Press Enter]
CPU Clock Drive: 			800
PCI Express Clock Drive: 		900
CPU Clock Skew (ps): 			0
MCH Clock Skew (ps): 			0

DRAM Performance Control
Performance Enhance: 			Standard
Extreme Memory Profile:			[Disabled] 
(G)MCH Frequency Latch: 		333
System Memory Multiplier:		2.00B
Memory Frequency (Mhz):			[942]
DRAM Timing Selectable: 		[Manual] 

Standard Timing Control
CAS Latency Time: 			[5]
tRCD: 					[5]
tRP: 					[5]
tRAS: 					[15]

Advanced Timing Control
tRRD: 					[Auto]
tWTR: 					[Auto]
tWR: 					[Auto]
tRFC: 					[Auto]
tRTP: 					[Auto]
Command Rate (CMD): 			[Auto] 

Driving Strength Profiles
Driving Strength: Press Enter 
Channel A
Static tRead Value: 			[10]
tRD Phase0 Adjustment: 			[Auto]
tRD Phase1 Adjustment: 			[Auto]
tRD Phase2 Adjustment: 			[Auto]
tRD Phase3 Adjustment: 			[Auto]
Trd2rd(Different Rank): 		[Auto]
Twr2wr(Different Rank): 		[Auto]
Twr2rd(Different Rank):			[Auto]
Trd2wr(Same/Diff Rank): 		[Auto]
Dimm1 ClockSkewControl:			[Auto] ps
Dimm2 ClockSkewControl:			[Auto] ps

Channel B
Static tRead Value: 			[10]
tRD Phase0 Adjustment: 			[Auto]
tRD Phase1 Adjustment: 			[Auto]
tRD Phase2 Adjustment: 			[Auto]
tRD Phase3 Adjustment: 			[Auto]
Trd2rd(Different Rank): 		[Auto]
Twr2wr(Different Rank): 		[Auto]
Twr2rd(Different Rank): 		[Auto]
Trd2wr(Same/Diff Rank): 		[Auto]
Dimm1 ClockSkewControl:			[Auto] ps
Dimm2 ClockSkewControl:			[Auto] ps

Motherboard Voltage Control
CPU
Voltage Types	 	
Load-Line Calibration: 			[Disabled]
CPU Vcore 				[1.3750]
CPU Termination 			[1.28]
CPU PLL 				[1.500V]
CPU Reference 				[0.9100] 71%
MCH/ICH
MCH Core 				[1.360V] 
MCH Reference				[0.8500] 66%
MCH/DRAM Ref 				[Normal]
ICH I/O  				[Normal] 
ICH Core  				[Normal] 
DRAM
DRAM Voltage  				[2.100V] 
DRAM Termination 			[1.050V]
Channel A Reference 			[Normal]
Channel B Reference 			[Normal]

Advanced Settings	
Limit CPUID Max. to 3 	 		[Disabled]
No-Execute Memory Protect 		[Enabled]
CPU Enhanced Halt (C1E) 		[Enabled]
C2/C2E State Support			[Disabled]
x C4/C4E State Support 	 		[Disabled]
CPU Thermal Monitor 2 (TM2)		[Enabled]
CPU EIST Function			[Enabled]
Virtualization Technology 	 	[Disabled]