smartctl -a sda smartctl version 5.38 [i686-mingw32-xp-sp3] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P120 series Device Model: SAMSUNG SP2004C Serial Number: S07GJ1UYC10550 Firmware Version: VM100-33 User Capacity: 200.049.647.616 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Thu Nov 19 13:01:38 2009 WN ==> WARNING: May need -F samsung3 enabled; see manual for details. SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (4572) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 76) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 3 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 6208 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5998 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 17413 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3629 190 Airflow_Temperature_Cel 0x0022 118 073 000 Old_age Always - 40 194 Temperature_Celsius 0x0022 118 073 000 Old_age Always - 40 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2412979 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 15 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 15 occurred at disk power-on lifetime: 14060 hours (585 days + 20 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 ef 2e 60 e0 Error: UNC at LBA = 0x00602eef = 6303471 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 01 ef 2e 60 e0 00 00:19:18.625 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:19:18.625 READ DMA 40 00 02 f1 2e 60 e0 00 00:19:18.625 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:19:18.625 READ DMA Error 14 occurred at disk power-on lifetime: 14060 hours (585 days + 20 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 02 ef 2e 60 e0 Error: UNC at LBA = 0x00602eef = 6303471 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 02 ef 2e 60 e0 00 00:19:16.750 READ VERIFY SECTOR(S) 40 00 04 f3 2e 60 e0 00 00:19:16.750 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:19:16.750 READ DMA Error 13 occurred at disk power-on lifetime: 14060 hours (585 days + 20 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 04 ef 2e 60 e0 Error: UNC at LBA = 0x00602eef = 6303471 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 04 ef 2e 60 e0 00 00:19:14.875 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:19:14.875 READ DMA 40 00 08 f7 2e 60 e0 00 00:19:14.875 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:19:14.875 READ DMA Error 12 occurred at disk power-on lifetime: 14060 hours (585 days + 20 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 ef 2e 60 e0 Error: UNC at LBA = 0x00602eef = 6303471 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 08 ef 2e 60 e0 00 00:19:13.000 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:19:13.000 READ DMA Error 11 occurred at disk power-on lifetime: 14060 hours (585 days + 20 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 10 ef 2e 60 e0 Error: UNC at LBA = 0x00602eef = 6303471 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 ef 2e 60 e0 00 00:19:11.125 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:19:11.125 READ DMA 40 00 10 df 2e 60 e0 00 00:19:11.125 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:19:11.125 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revis ion number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Drücken Sie eine beliebige Taste . . .