smartctl -a I:\
smartctl 5.39 2009-10-31 r2980 [i686-pc-mingw32-xp-sp3] (cf-win32-20091101)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint T166 series
Device Model:     SAMSUNG HD501LJ
Serial Number:    S0MUJFWQ368777
Firmware Version: CR100-13
User Capacity:    500.107.862.016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3b
Local Time is:    Thu Nov 19 15:18:12 2009 WN
SMART support is: Available - device has SMART capability.
                  Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (8814) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off supp
ort.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 150) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_
FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -
       0
  3 Spin_Up_Time            0x0007   100   100   015    Pre-fail  Always       -
       7360
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -
       1779
  5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail  Always       -
       0
  7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -
       0
  8 Seek_Time_Performance   0x0025   253   253   015    Pre-fail  Offline      -
       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -
       4341
 10 Spin_Retry_Count        0x0033   253   253   051    Pre-fail  Always       -
       0
 11 Calibration_Retry_Count 0x0012   253   100   000    Old_age   Always       -
       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -
       1376
 13 Read_Soft_Error_Rate    0x000e   100   100   000    Old_age   Always       -
       70840648
187 Reported_Uncorrect      0x0032   253   253   000    Old_age   Always       -
       0
188 Command_Timeout         0x0032   001   001   000    Old_age   Always       -
       29816
190 Airflow_Temperature_Cel 0x0022   063   048   000    Old_age   Always       -
       37
194 Temperature_Celsius     0x0022   127   082   000    Old_age   Always       -
       37
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -
       70840648
196 Reallocated_Event_Count 0x0032   253   253   000    Old_age   Always       -
       0
197 Current_Pending_Sector  0x0012   253   253   000    Old_age   Always       -
       0
198 Offline_Uncorrectable   0x0030   253   253   000    Old_age   Offline      -
       0
199 UDMA_CRC_Error_Count    0x003e   199   198   000    Old_age   Always       -
       8292
200 Multi_Zone_Error_Rate   0x000a   253   100   000    Old_age   Always       -
       0
201 Soft_Read_Error_Rate    0x000a   100   100   000    Old_age   Always       -
       0
202 Data_Address_Mark_Errs  0x0032   253   253   000    Old_age   Always       -
       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selectiv
e self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been ru
n
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Drücken Sie eine beliebige Taste . . .