Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WMC4N0693989 LU WWN Device Id: 5 0014ee 659377318 Firmware Version: 80.00A80 User Capacity: 3'000'592'982'016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jan 4 08:33:51 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 176 176 021 Pre-fail Always - 6175 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1092 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 79341 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 65 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 41 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1050 194 Temperature_Celsius 0x0022 128 109 000 Old_age Always - 22 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 Error 1 occurred at disk power-on lifetime: 13757 hours (573 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 53 4f c2 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d8 01 01 4f c2 a0 00 00:19:07.482 SMART ENABLE OPERATIONS ec 00 00 00 00 00 a0 00 00:19:07.478 IDENTIFY DEVICE b0 d0 01 01 4f c2 a0 00 00:14:50.737 SMART READ DATA ec 00 00 00 00 00 a0 00 00:14:38.475 IDENTIFY DEVICE b0 d0 01 01 4f c2 a0 00 00:04:39.066 SMART READ DATA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 13774 - # 2 Short offline Completed without error 00% 13766 - # 3 Extended offline Completed without error 00% 21967 -