C:\Programme\smartmontools\bin>smartctl -a /dev/hdb smartctl version 5.38 [i686-mingw32-xp-sp3] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823A Serial Number: 3ND0LV9B Firmware Version: 3.02 User Capacity: 250.059.350.016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sat Jan 03 01:12:25 2009 WN SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 055 047 006 Pre-fail Always - 209743068 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1275 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 17 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 664427405 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 10547 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1262 194 Temperature_Celsius 0x0022 032 060 000 Old_age Always - 32 (0 14 0 0) 195 Hardware_ECC_Recovered 0x001a 055 046 000 Old_age Always - 209743068 197 Current_Pending_Sector 0x0012 092 092 000 Old_age Always - 160 198 Offline_Uncorrectable 0x0010 092 092 000 Old_age Offline - 160 199 UDMA_CRC_Error_Count 0x003e 200 197 000 Old_age Always - 15 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 1145 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1145 occurred at disk power-on lifetime: 10547 hours (439 days + 11 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 05 3e 00 f0 Error: UNC at LBA = 0x00003e05 = 15877 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff 3d 00 f0 00 02:17:14.426 READ DMA EXT 25 00 08 f7 3d 00 f0 00 02:17:14.429 READ DMA EXT 25 00 08 ef 3d 00 f0 00 02:17:14.429 READ DMA EXT 25 00 08 e7 3d 00 f0 00 02:17:14.429 READ DMA EXT 25 00 08 df 3d 00 f0 00 02:17:14.428 READ DMA EXT Error 1144 occurred at disk power-on lifetime: 10547 hours (439 days + 11 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 05 3e 00 f0 Error: UNC at LBA = 0x00003e05 = 15877 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff 3d 00 f0 00 02:16:13.364 READ DMA EXT 25 00 08 f7 3d 00 f0 00 02:16:13.367 READ DMA EXT 25 00 08 ef 3d 00 f0 00 02:16:13.367 READ DMA EXT 25 00 08 e7 3d 00 f0 00 02:16:13.366 READ DMA EXT 25 00 08 df 3d 00 f0 00 02:16:13.366 READ DMA EXT Error 1143 occurred at disk power-on lifetime: 10547 hours (439 days + 11 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 05 3e 00 f0 Error: UNC at LBA = 0x00003e05 = 15877 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff 3d 00 f0 00 02:15:12.233 READ DMA EXT 25 00 08 f7 3d 00 f0 00 02:15:12.237 READ DMA EXT 25 00 08 ef 3d 00 f0 00 02:15:12.236 READ DMA EXT 25 00 08 e7 3d 00 f0 00 02:15:12.236 READ DMA EXT 25 00 08 df 3d 00 f0 00 02:15:12.236 READ DMA EXT Error 1142 occurred at disk power-on lifetime: 10547 hours (439 days + 11 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 05 3e 00 f0 Error: UNC at LBA = 0x00003e05 = 15877 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff 3d 00 f0 00 02:14:11.165 READ DMA EXT 25 00 08 f7 3d 00 f0 00 02:14:11.168 READ DMA EXT 25 00 08 ef 3d 00 f0 00 02:14:11.168 READ DMA EXT 25 00 08 e7 3d 00 f0 00 02:14:11.167 READ DMA EXT 25 00 08 df 3d 00 f0 00 02:14:11.167 READ DMA EXT Error 1141 occurred at disk power-on lifetime: 10547 hours (439 days + 11 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 05 3e 00 f0 Error: UNC at LBA = 0x00003e05 = 15877 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff 3d 00 f0 00 02:13:10.069 READ DMA EXT 25 00 08 f7 3d 00 f0 00 02:13:10.072 READ DMA EXT 25 00 08 ef 3d 00 f0 00 02:13:10.072 READ DMA EXT 25 00 08 e7 3d 00 f0 00 02:13:10.072 READ DMA EXT 25 00 08 df 3d 00 f0 00 02:13:10.071 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error # 1 Extended offline Completed: read failure 90% 10538 158 77 # 2 Extended offline Completed: read failure 90% 10538 158 77 # 3 Short offline Completed: read failure 90% 10538 158 77 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. C:\Programme\smartmontools\bin>