smartctl 5.40 2010-10-16 r3189 [i686-w64-mingw32-win7(64)-sp1] (sf-win32-5.40-1) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Warning: Limited functionality due to missing admin rights === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green family Device Model: WDC WD10EADS-11M2B2 Serial Number: [No Information Found] Firmware Version: 80.00A80 Device is: In smartctl database [for details use: -P show] ATA Version is: [No Information Found] ATA Standard is: [No Information Found] Local Time is: Tue Jun 07 13:33:23 2011 MS SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled Error SMART Thresholds Read failed: Function not implemented Smartctl: SMART Read Thresholds failed. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 228) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 --- Pre-fail Always - 0 3 Spin_Up_Time 0x0027 129 124 --- Pre-fail Always - 6525 4 Start_Stop_Count 0x0032 100 100 --- Old_age Always - 144 5 Reallocated_Sector_Ct 0x0033 200 200 --- Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 --- Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 58 10 Spin_Retry_Count 0x0032 100 100 --- Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 --- Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 70 192 Power-Off_Retract_Count 0x0032 200 200 --- Old_age Always - 24 193 Load_Cycle_Count 0x0032 200 200 --- Old_age Always - 458 194 Temperature_Celsius 0x0022 114 096 --- Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 --- Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 --- Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 --- Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 --- Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 --- Old_age Offline - 0 Error SMART Error Log Read failed: Function not implemented Smartctl: SMART Error Log Read Failed Error SMART Error Self-Test Log Read failed: Function not implemented Smartctl: SMART Self Test Log Read Failed Error SMART Read Selective Self-Test Log failed: Function not implemented Smartctl: SMART Selective Self Test Log Read Failed