smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..59GSM (Adv. Format) Device Model: TOSHIBA MK1059GSM Serial Number: 417LFCKCS LU WWN Device Id: 5 000039 337181db3 Firmware Version: GL001U User Capacity: 1.000.204.886.016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Jan 26 09:13:26 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 112) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 289) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 096 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 5398 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5094 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 4800 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 3309 10 Spin_Retry_Count 0x0033 191 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3411 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 9379 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 15 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 8646 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 52 (Min/Max 10/54) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 387 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 11576 198 Offline_Uncorrectable 0x0030 001 001 000 Old_age Offline - 255 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 75 222 Loaded_Hours 0x0032 094 094 000 Old_age Always - 2744 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 325 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 19620 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 19620 occurred at disk power-on lifetime: 3286 hours (136 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 f8 a4 7c e0 Error: UNC at LBA = 0x007ca4f8 = 8168696 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 7f c0 a4 7c e0 00 11:36:27.990 READ VERIFY SECTOR(S) EXT 42 00 7f 41 a4 7c e0 00 11:36:27.989 READ VERIFY SECTOR(S) EXT 42 00 7f c2 a3 7c e0 00 11:36:27.989 READ VERIFY SECTOR(S) EXT 42 00 7f 43 a3 7c e0 00 11:36:27.988 READ VERIFY SECTOR(S) EXT 42 00 7f c4 a2 7c e0 00 11:36:27.988 READ VERIFY SECTOR(S) EXT Error 19619 occurred at disk power-on lifetime: 3286 hours (136 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 78 82 7c e0 Error: UNC at LBA = 0x007c8278 = 8159864 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 7f 06 82 7c e0 00 11:36:22.156 READ VERIFY SECTOR(S) EXT 42 00 7f 87 81 7c e0 00 11:36:22.154 READ VERIFY SECTOR(S) EXT 42 00 7f 08 81 7c e0 00 11:36:22.153 READ VERIFY SECTOR(S) EXT 42 00 7f 89 80 7c e0 00 11:36:22.153 READ VERIFY SECTOR(S) EXT 42 00 7f 0a 80 7c e0 00 11:36:22.152 READ VERIFY SECTOR(S) EXT Error 19618 occurred at disk power-on lifetime: 3286 hours (136 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 b0 69 7c e0 Error: UNC at LBA = 0x007c69b0 = 8153520 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 7f 38 69 7c e0 00 11:36:14.914 READ VERIFY SECTOR(S) EXT 42 00 7f b9 68 7c e0 00 11:36:14.914 READ VERIFY SECTOR(S) EXT 42 00 7f 3a 68 7c e0 00 11:36:14.914 READ VERIFY SECTOR(S) EXT 42 00 7f bb 67 7c e0 00 11:36:14.914 READ VERIFY SECTOR(S) EXT 42 00 7f 3c 67 7c e0 00 11:36:14.914 READ VERIFY SECTOR(S) EXT Error 19617 occurred at disk power-on lifetime: 3286 hours (136 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 68 61 7c e0 Error: UNC at LBA = 0x007c6168 = 8151400 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 7f 48 61 7c e0 00 11:36:10.059 READ VERIFY SECTOR(S) EXT 42 00 7f c9 60 7c e0 00 11:36:10.059 READ VERIFY SECTOR(S) EXT 42 00 7f 4a 60 7c e0 00 11:36:10.058 READ VERIFY SECTOR(S) EXT 42 00 7f cb 5f 7c e0 00 11:36:10.058 READ VERIFY SECTOR(S) EXT 42 00 7f 4c 5f 7c e0 00 11:36:10.058 READ VERIFY SECTOR(S) EXT Error 19616 occurred at disk power-on lifetime: 3286 hours (136 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 28 59 7c e0 Error: UNC at LBA = 0x007c5928 = 8149288 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 7f d9 58 7c e0 00 11:36:05.123 READ VERIFY SECTOR(S) EXT 42 00 7f 5a 58 7c e0 00 11:36:05.122 READ VERIFY SECTOR(S) EXT 42 00 7f db 57 7c e0 00 11:36:05.122 READ VERIFY SECTOR(S) EXT 42 00 7f 5c 57 7c e0 00 11:36:05.121 READ VERIFY SECTOR(S) EXT 42 00 7f dd 56 7c e0 00 11:36:05.120 READ VERIFY SECTOR(S) EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 00% 3309 196056 # 2 Short offline Completed: read failure 00% 3286 196056 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.