ComputerBase Menü
Aktuelles

ODROID-C2 Debian Jessie Kernel zerschossen

PoD-BoT

PoD-BoT

Banned
Registriert
Feb. 2006
Beiträge
598
Hi Leute,

ich hatte die ganze Zeit einen ODROID-C2 als owncloud-Server bei mir Zuhause laufen, um Bilder mit Freunden zu teilen. Jetzt wollte ich ihn um einen internen Samba share erweitern, sodass ich von mir gemachte Bilder (unserer Kinder) mit meiner Freundin teilen kann und andersherum, also eine zentrale Sammelstelle.

Auf dem C2 läuft ein minimales Debian Jessie Image (aus dem ODROID-Forum) ohne GUI. Ich habe also alles über das CLI (SSH) aufgesetzt.

Also wollte ich den Samba-Dienst installieren, dafür habe ich vorher ein
Code: 
apt-get update && apt-get dist-upgrade
gemacht. Leider hat der C2 beim Upgrade nicht mehr reagiert - ich glaube es war während eines Kernel-Updates - und ich musste ihn hardresetten, also neustarten.

Seit dem bootet er nicht mehr. Der einzige Output über HDMI ist ein Teil des POST-Screens, dann hält er an (4 Sec).

Nach ein wenig Recherche gibt es wohl die Möglichkeit den "rescue"-Mode zu booten, nur leider komme ich da erst gar nicht rein, da meine Tastatur nicht erkannt wird und ich keine Tastenkombis mitgeben kann. Auch hat die Distri meiner Meinung nach überhaupt keine Grub oder so etwas.

Auch ist es wohl möglich über USB etwas zu booten und den rescue-Mode der Live-Distri zu verwenden... auch das ist mir nicht möglich, da kein Eingriff in den Bootvorgang...

Ich kann auf die µSD-Karte über einen anderen Rechner zugreifen, die boot-Partition (boot.ini) maniplulieren, nur weiß ich nicht genau was zu tun ist.


Könnt ihr mir helfen?

Danke und Grüße

PoD
 
Zuletzt bearbeitet:
Bitte zeige die exakte und komplette Fehlermeldung die beim Booten ausgegeben wird. Die erste Fehlermeldung die erscheint.
 
Ich mache später mal ein Bild vom POST, geht leider so schnell, dass man nur noch die letzten Zeilen sieht.

CPU0, stopping und so...

Was ich jetzt spontan noch in Logfiles auf der µSD-Karte gefunden habe...

rootfs/var/log/apt/history.log
Code: 
Start-Date: 2017-06-18  13:13:44
Commandline: apt-get install apt-transport-https
Install: apt-transport-https:arm64 (1.0.9.8.4)
End-Date: 2017-06-18  13:13:46

Start-Date: 2017-06-18  13:16:00
Commandline: apt-get dist-upgrade
Upgrade: bind9-host:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), liblwres90:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), mysql-server-core-5.5:arm64 (5.5.54-0+deb8u1, 5.5.55-0+deb8u1), libgnutls-openssl27:arm64 (3.3.8-6+deb8u4, 3.3.8-6+deb8u6), mysql-server-5.5:arm64 (5.5.54-0+deb8u1, 5.5.55-0+deb8u1), multiarch-support:arm64 (2.19-18+deb8u7, 2.19-18+deb8u9), libdns100:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), perl:arm64 (5.20.2-3+deb8u6, 5.20.2-3+deb8u7), libisc-export95:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), libisccfg90:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), perl-base:arm64 (5.20.2-3+deb8u6, 5.20.2-3+deb8u7), libbind9-90:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), libgnutls-deb0-28:arm64 (3.3.8-6+deb8u4, 3.3.8-6+deb8u6), owncloud:arm64 (9.1.4-2.1, 9.1.6-1.1), libicu52:arm64 (52.1-8+deb8u4, 52.1-8+deb8u5), libtiff5:arm64 (4.0.3-12.3+deb8u2, 4.0.3-12.3+deb8u3), sudo:arm64 (1.8.10p3-1+deb8u3, 1.8.10p3-1+deb8u4), libfreetype6:arm64 (2.5.2-3+deb8u1, 2.5.2-3+deb8u2), libc-dev-bin:arm64 (2.19-18+deb8u7, 2.19-18+deb8u9), libc-bin:arm64 (2.19-18+deb8u7, 2.19-18+deb8u9), libc6:arm64 (2.19-18+deb8u7, 2.19-18+deb8u9), dnsutils:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), owncloud-deps-php5:arm64 (9.1.4-2.1, 9.1.6-1.1), base-files:arm64 (8+deb8u7, 8+deb8u8), libldap-2.4-2:arm64 (2.4.40+dfsg-1+deb8u2, 2.4.40+dfsg-1+deb8u3), mysql-client-5.5:arm64 (5.5.54-0+deb8u1, 5.5.55-0+deb8u1), perl-modules:arm64 (5.20.2-3+deb8u6, 5.20.2-3+deb8u7), mysql-common:arm64 (5.5.54-0+deb8u1, 5.5.55-0+deb8u1), linux-headers-3.14.79+:arm64 (3.14.79-20170408-C2, 3.14.79-20170511-C2), ca-certificates:arm64 (20141019+deb8u2, 20141019+deb8u3), libmysqlclient18:arm64 (5.5.54-0+deb8u1, 5.5.55-0+deb8u1), git-man:arm64 (2.1.4-2.1+deb8u2, 2.1.4-2.1+deb8u3), git:arm64 (2.1.4-2.1+deb8u2, 2.1.4-2.1+deb8u3), passwd:arm64 (4.2-3+deb8u3, 4.2-3+deb8u4), login:arm64 (4.2-3+deb8u3, 4.2-3+deb8u4), mysql-server:arm64 (5.5.54-0+deb8u1, 5.5.55-0+deb8u1), linux-libc-dev:arm64 (3.16.39-1+deb8u2, 3.16.43-2), libtasn1-6:arm64 (4.2-3+deb8u2, 4.2-3+deb8u3), libisccfg-export90:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), libdns-export100:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), linux-image-3.14.79+:arm64 (3.14.79-20170408-C2, 3.14.79-20170511-C2), libpq5:arm64 (9.4.11-0+deb8u2, 9.4.12-0+deb8u1), locales:arm64 (2.19-18+deb8u7, 2.19-18+deb8u9), libirs-export91:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), libisccc90:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), libc6-dev:arm64 (2.19-18+deb8u7, 2.19-18+deb8u9), libisc95:arm64 (9.9.5.dfsg-9+deb8u10, 9.9.5.dfsg-9+deb8u11), owncloud-files:arm64 (9.1.4-1.1, 9.1.6-1.1), libgcrypt20:arm64 (1.6.3-2+deb8u2, 1.6.3-2+deb8u3)

rootfs/var/log/apt/term.log
Code: 
Log started: 2017-06-18  13:13:44
Selecting previously unselected package apt-transport-https.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65569 files and directories currently installed.)
Preparing to unpack .../apt-transport-https_1.0.9.8.4_arm64.deb ...
Unpacking apt-transport-https (1.0.9.8.4) ...
Setting up apt-transport-https (1.0.9.8.4) ...
Log ended: 2017-06-18  13:13:46

Log started: 2017-06-18  13:16:00
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65575 files and directories currently installed.)
Preparing to unpack .../base-files_8+deb8u8_arm64.deb ...
Unpacking base-files (8+deb8u8) over (8+deb8u7) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up base-files (8+deb8u8) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65575 files and directories currently installed.)
Preparing to unpack .../login_1%3a4.2-3+deb8u4_arm64.deb ...
Unpacking login (1:4.2-3+deb8u4) over (1:4.2-3+deb8u3) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up login (1:4.2-3+deb8u4) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65575 files and directories currently installed.)
Preparing to unpack .../perl_5.20.2-3+deb8u7_arm64.deb ...
Unpacking perl (5.20.2-3+deb8u7) over (5.20.2-3+deb8u6) ...
Preparing to unpack .../perl-base_5.20.2-3+deb8u7_arm64.deb ...
Unpacking perl-base (5.20.2-3+deb8u7) over (5.20.2-3+deb8u6) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up perl-base (5.20.2-3+deb8u7) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65575 files and directories currently installed.)
Preparing to unpack .../perl-modules_5.20.2-3+deb8u7_all.deb ...
Unpacking perl-modules (5.20.2-3+deb8u7) over (5.20.2-3+deb8u6) ...
Preparing to unpack .../libc6-dev_2.19-18+deb8u9_arm64.deb ...
Unpacking libc6-dev:arm64 (2.19-18+deb8u9) over (2.19-18+deb8u7) ...
Preparing to unpack .../libc-dev-bin_2.19-18+deb8u9_arm64.deb ...
Unpacking libc-dev-bin (2.19-18+deb8u9) over (2.19-18+deb8u7) ...
Preparing to unpack .../linux-libc-dev_3.16.43-2_arm64.deb ...
Unpacking linux-libc-dev:arm64 (3.16.43-2) over (3.16.39-1+deb8u2) ...
Preparing to unpack .../libc-bin_2.19-18+deb8u9_arm64.deb ...
Unpacking libc-bin (2.19-18+deb8u9) over (2.19-18+deb8u7) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up libc-bin (2.19-18+deb8u9) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65575 files and directories currently installed.)
Preparing to unpack .../libc6_2.19-18+deb8u9_arm64.deb ...
Unpacking libc6:arm64 (2.19-18+deb8u9) over (2.19-18+deb8u7) ...
Setting up libc6:arm64 (2.19-18+deb8u9) ...
Processing triggers for libc-bin (2.19-18+deb8u9) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65575 files and directories currently installed.)
Preparing to unpack .../libgcrypt20_1.6.3-2+deb8u3_arm64.deb ...
Unpacking libgcrypt20:arm64 (1.6.3-2+deb8u3) over (1.6.3-2+deb8u2) ...
Setting up libgcrypt20:arm64 (1.6.3-2+deb8u3) ...
Processing triggers for libc-bin (2.19-18+deb8u9) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65575 files and directories currently installed.)
Preparing to unpack .../libgnutls-openssl27_3.3.8-6+deb8u6_arm64.deb ...
Unpacking libgnutls-openssl27:arm64 (3.3.8-6+deb8u6) over (3.3.8-6+deb8u4) ...
Preparing to unpack .../libtasn1-6_4.2-3+deb8u3_arm64.deb ...
Unpacking libtasn1-6:arm64 (4.2-3+deb8u3) over (4.2-3+deb8u2) ...
Preparing to unpack .../libgnutls-deb0-28_3.3.8-6+deb8u6_arm64.deb ...
Unpacking libgnutls-deb0-28:arm64 (3.3.8-6+deb8u6) over (3.3.8-6+deb8u4) ...
Preparing to unpack .../libldap-2.4-2_2.4.40+dfsg-1+deb8u3_arm64.deb ...
Unpacking libldap-2.4-2:arm64 (2.4.40+dfsg-1+deb8u3) over (2.4.40+dfsg-1+deb8u2) ...
Preparing to unpack .../libisc-export95_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libisc-export95 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../libdns-export100_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libdns-export100 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../libfreetype6_2.5.2-3+deb8u2_arm64.deb ...
Unpacking libfreetype6:arm64 (2.5.2-3+deb8u2) over (2.5.2-3+deb8u1) ...
Preparing to unpack .../libicu52_52.1-8+deb8u5_arm64.deb ...
Unpacking libicu52:arm64 (52.1-8+deb8u5) over (52.1-8+deb8u4) ...
Preparing to unpack .../libisccfg-export90_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libisccfg-export90 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../libirs-export91_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libirs-export91 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../mysql-common_5.5.55-0+deb8u1_all.deb ...
Unpacking mysql-common (5.5.55-0+deb8u1) over (5.5.54-0+deb8u1) ...
Preparing to unpack .../libmysqlclient18_5.5.55-0+deb8u1_arm64.deb ...
Unpacking libmysqlclient18:arm64 (5.5.55-0+deb8u1) over (5.5.54-0+deb8u1) ...
Preparing to unpack .../libpq5_9.4.12-0+deb8u1_arm64.deb ...
Unpacking libpq5:arm64 (9.4.12-0+deb8u1) over (9.4.11-0+deb8u2) ...
Preparing to unpack .../libtiff5_4.0.3-12.3+deb8u3_arm64.deb ...
Unpacking libtiff5:arm64 (4.0.3-12.3+deb8u3) over (4.0.3-12.3+deb8u2) ...
Preparing to unpack .../linux-image-3.14.79+_3.14.79-20170511-C2_arm64.deb ...
The directory /lib/modules/3.14.79+ still exists. Continuing as directed.
Package configuration
Configuring linux-image-3.14.79+
The kernel version running is the same as the one being installed   
You are attempting to install a kernel version that is the same as the version you are currently running (version 3.14.79+). The modules list is quite likely to have been changed, and the modules dependency file /lib/modules/3.14.79+/modules.dep needs to be re-built. It can not be built correctly right now, since the module list for the running kernel are likely to be different from the kernel installed. I am creating a new modules.dep file, but that may not be correct. It shall be regenerated correctly at next reboot.
I repeat: you have to reboot in order for the modules file to be created correctly. Until you reboot, it may be impossible to load some modules. Reboot as soon as this install is finished (Do not reboot right now, since you may not be able to boot back up until installation is over, but boot immediately after). I can not stress that too much. You need to reboot soon.
Examining /etc/kernel/preinst.d/
run-parts: executing /etc/kernel/preinst.d/remove-old-on-upgrade 3.14.79+ /boot/vmlinuz-3.14.79+
Done.
Unpacking linux-image-3.14.79+ (3.14.79-20170511-C2) over (3.14.79-20170408-C2) ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.14.79+ /boot/vmlinuz-3.14.79+
Preparing to unpack .../mysql-server_5.5.55-0+deb8u1_all.deb ...
Unpacking mysql-server (5.5.55-0+deb8u1) over (5.5.54-0+deb8u1) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up mysql-common (5.5.55-0+deb8u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65576 files and directories currently installed.)
Preparing to unpack .../mysql-server-5.5_5.5.55-0+deb8u1_arm64.deb ...
Unpacking mysql-server-5.5 (5.5.55-0+deb8u1) over (5.5.54-0+deb8u1) ...
Preparing to unpack .../mysql-client-5.5_5.5.55-0+deb8u1_arm64.deb ...
Unpacking mysql-client-5.5 (5.5.55-0+deb8u1) over (5.5.54-0+deb8u1) ...
Preparing to unpack .../mysql-server-core-5.5_5.5.55-0+deb8u1_arm64.deb ...
Unpacking mysql-server-core-5.5 (5.5.55-0+deb8u1) over (5.5.54-0+deb8u1) ...
Preparing to unpack .../passwd_1%3a4.2-3+deb8u4_arm64.deb ...
Unpacking passwd (1:4.2-3+deb8u4) over (1:4.2-3+deb8u3) ...
Processing triggers for systemd (215-17+deb8u7) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up passwd (1:4.2-3+deb8u4) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65576 files and directories currently installed.)
Preparing to unpack .../multiarch-support_2.19-18+deb8u9_arm64.deb ...
Unpacking multiarch-support (2.19-18+deb8u9) over (2.19-18+deb8u7) ...
Setting up multiarch-support (2.19-18+deb8u9) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 65576 files and directories currently installed.)
Preparing to unpack .../dnsutils_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking dnsutils (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../bind9-host_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking bind9-host (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../libisc95_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libisc95 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../libdns100_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libdns100 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../libisccc90_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libisccc90 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../libisccfg90_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libisccfg90 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../liblwres90_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking liblwres90 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../libbind9-90_1%3a9.9.5.dfsg-9+deb8u11_arm64.deb ...
Unpacking libbind9-90 (1:9.9.5.dfsg-9+deb8u11) over (1:9.9.5.dfsg-9+deb8u10) ...
Preparing to unpack .../locales_2.19-18+deb8u9_all.deb ...
Unpacking locales (2.19-18+deb8u9) over (2.19-18+deb8u7) ...
Preparing to unpack .../ca-certificates_20141019+deb8u3_all.deb ...
Unpacking ca-certificates (20141019+deb8u3) over (20141019+deb8u2) ...
Preparing to unpack .../git-man_1%3a2.1.4-2.1+deb8u3_all.deb ...
Unpacking git-man (1:2.1.4-2.1+deb8u3) over (1:2.1.4-2.1+deb8u2) ...
Preparing to unpack .../git_1%3a2.1.4-2.1+deb8u3_arm64.deb ...
Unpacking git (1:2.1.4-2.1+deb8u3) over (1:2.1.4-2.1+deb8u2) ...
Preparing to unpack .../linux-headers-3.14.79+_3.14.79-20170511-C2_arm64.deb ...
Unpacking linux-headers-3.14.79+ (3.14.79-20170511-C2) over (3.14.79-20170408-C2) ...

Scheint zumindest schon einmal nicht das Kernel-Update selbst gewesen zu sein, das fehlschlug, denn der war wohl schon aktuell!?
 
Zuletzt bearbeitet:
Ja, aber da steht meiner Meinung nach nichts interessantes drin:

rootfs/var/log/syslog
Code: 
Jun 18 04:39:01 odroidic2-jessie64 CRON[19579]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 04:47:01 odroidic2-jessie64 CRON[19626]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ))
Jun 18 05:09:01 odroidic2-jessie64 CRON[19637]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 05:17:01 odroidic2-jessie64 CRON[19684]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun 18 05:39:01 odroidic2-jessie64 CRON[19691]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 06:09:01 odroidic2-jessie64 CRON[19742]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 06:17:01 odroidic2-jessie64 CRON[19789]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun 18 06:39:01 odroidic2-jessie64 CRON[19796]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 07:09:01 odroidic2-jessie64 CRON[19847]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 07:17:01 odroidic2-jessie64 CRON[19894]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun 18 07:39:01 odroidic2-jessie64 CRON[19901]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 08:09:01 odroidic2-jessie64 CRON[19952]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 08:17:01 odroidic2-jessie64 CRON[19999]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun 18 08:39:01 odroidic2-jessie64 CRON[20006]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 09:09:01 odroidic2-jessie64 CRON[20057]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 09:17:01 odroidic2-jessie64 CRON[20104]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun 18 09:39:01 odroidic2-jessie64 CRON[20111]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 10:09:01 odroidic2-jessie64 CRON[20163]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 10:17:01 odroidic2-jessie64 CRON[20211]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun 18 10:39:01 odroidic2-jessie64 CRON[20218]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 11:08:59 odroidic2-jessie64 systemd[1]: Starting Session c101 of user root.
Jun 18 11:08:59 odroidic2-jessie64 systemd[1]: Started Session c101 of user root.
Jun 18 11:09:01 odroidic2-jessie64 CRON[20289]: (root) CMD (  [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Jun 18 11:17:01 odroidic2-jessie64 CRON[22787]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jun 18 11:20:03 odroidic2-jessie64 systemd[1]: Reloading.
Jun 18 11:20:03 odroidic2-jessie64 systemd[1]: Stopping LSB: Start and stop the mysql database server daemon...
Jun 18 11:20:05 odroidic2-jessie64 mysql[23427]: Stopping MySQL database server: mysqld.
Jun 18 11:20:05 odroidic2-jessie64 systemd[1]: Stopped LSB: Start and stop the mysql database server daemon.
Jun 18 11:20:06 odroidic2-jessie64 systemd[1]: Reloading.
Jun 18 11:20:06 odroidic2-jessie64 systemd[1]: Stopped LSB: Start and stop the mysql database server daemon.
Jun 18 11:20:27 odroidic2-jessie64 systemd[1]: Reloading.

Leider war kein bootlogd oder ähnliches aktiv :(
 
Hi,

Tipp 1: Never touch a running System.
Tipp 2: Backup machen.
Tipp 3: Zyxel Nas kaufen, dann hast du alles los.
Info : Wenn es weh tut, lernt man am meisten.

Lieben Gruß
Wegald
 
So hier der "Screenshot" vom POST... ich mach später mal ein 60fps Video, vielleicht erkennt man da den Fehler, hier sehe ich nichts:

Clipboard33.jpg

Habe nochmal reingeschaut und ne Fehlermeldung gefunden:
Code: 
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Davor kam noch sowas:
Code: 
rootfs was not cleanly unmounted, check forced. # er macht also einen fsck
Pass 1: Checking inodes, blocks and sizes
inodes that were part of a corrupted orphan linked list found. Fix? yes
inode 78 was part of the orphaned inode list. FIXED.
...
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information

rootfs: ***** FILE SYSTEM WAS MODIFIED *****
fsck exited with status code 1 # aus der manpage: 1 Errors were found and corrected.
done.
...
EXT4-fs (mmcblk0g2): mounted filesystem without journal, 0pts: (null)
...
systemd[1]: systemd 215 running in system mode. ...
systemd[1]: Detected architecture 'arm64'.

Welcome to Debian GNU/Linux 8 (jessie)!

...

Unable to handle kernel paging request at virtual address 100000000000010 # oder so!?
...
internal error: Oops: 96400045 [s1] PREEMPT # oder so!?
...
Dann rödelt der da irgendwelche Memory-Adressen durch und dann kommt die "Kernel panic" und die CPU-Kerne werden gestoppt...
 
Zuletzt bearbeitet: (mehr Logs...)
Meiner Meinung nach sieht das Ganze nach einem korrupten Dateisystem aus. Ich kann dir zu deinem Problem zwar keine Hilfe geben, aber dafür drei Tipps für die Zukunft.

1) Im Allgemeinen sind "hobby" Linux-Distros und Distros von Hardware-Herstellern für ARM-Einplatinencomputer der reinste Müll. Für Einplatinencomputer wie der Odroid C0/C1/C2 oder Banana Pis gibt es die Community Distro Armbian. Letztere basiert auf Debian und wird von einer aktiven Community gepflegt: https://www.armbian.com/

2) Die Wahl der SD-Karte spielt eine wesentliche Rolle für den guten und zuverlässigen Betrieb eines Einplatinencomputer. Schlechte SD-Karten begünstigen im Dauereinsatz Boot-Probleme und die Korruption des Dateisystems.

3) Ein gutes Netzteil (und Stromkabel) ist das A und O, damit ein Einplatinencomputer eine stabile Stromversorgung hat. Eine instabile Stromversorgung kann auch die Korruption des Dateisystems begünstigen.
 
Zuletzt bearbeitet:
Danke für Dein Kommentar.

zu 1) Ich fand es läge nahe ein Image aus dem Herstellerforum zu verwenden. Was macht eine "reinste-Müll-Distri" denn aus? Wie ist der Support für spezielle Einplatinencomputer bei einem so übergreifenden Projekt wie "armbian"? Der Erzeuger des C2-Jessie-Images wirbt vor allem mit C2-spezifischem Support für z.B. den IR-Empfänger (LIRC), RTC Addon- und allgemein Addon-Boards, vielmehr aber auch für die implementierte bzw. unterstütze Software wie z.B. Kodi mit HW-Decoder, Chromium, QT5 uvm. Die Frage ist, wie sieht das armbian-seitig aus - wie ist dort der Support?

zu 2) und 3) sollte bei mir nicht das Problem sein. Die Hardware lief ja wie beschrieben monatelang 24/7 und erst durch ein fehlerhaftes dist-upgrade wurde das Linux zerschossen... könnte natürlich genau DANN zum Fehler kommen, aber es handelt sich um Markenteile...
 
Update zur Lösung meines Problems:

Durch die nette Hilfe aus dem Odroid-Forum, konnte ich mein System wiederherstellen.
Ich habe dafür eine weitere µSD Karte mit dem Image bespielt, das ich damals zur initialen Einrichtung meines Odroids verwendet habe. Nach Updates und Upgrade habe ich die Boot-Partition kopiert und auf die µSD Karte mit dem defekten System gespielt, also ersetzt.
Siehe da, das System bootet nun wieder wie vorher. Und auch der Samba-Dienst (NAS) läuft jetzt :)

Closed.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

tarifa
Damned Small Linux (DSL) ist zurück - jetzt nach Jahren wieder am Start - als DSL 24
Antworten
3
Aufrufe
1.607
bluedxca93
B
Fallaxia
Kernel panic beim booten. Invalid OPCODE
Antworten
15
Aufrufe
696
Fallaxia
Fallaxia
M
Vagrant. Die richtige Config fürs LAMP?
Antworten
1
Aufrufe
1.168
patrick888
patrick888
kim88
Leserartikel WSL2: Eine Brücke zwischen Windows und Linux – Einblick aus der Perspektive eines Linux-Nutzers
Antworten
18
Aufrufe
4.592
0815burner
0815burner
G
Debian 11 (Bullseye) [+Proxmox] IPv4 funktioniert nicht mehr
Antworten
12
Aufrufe
5.362
Gabgobie
G

Passend zum Thema

Zurück
Oben

Willkommen auf ComputerBase!

Mit Werbung weiterlesen

Besuche ComputerBase wie gewohnt mit Werbung und Tracking. Die Zustimmung ist jederzeit widerrufbar.

Details im Privacy Center und in der Liste unserer Partner. Ein Widerruf ist möglich in der Datenschutzerklärung.

… oder ComputerBase Pro bestellen

Nutze ComputerBase ohne Werbebanner, Video-Ads und Werbetracking schon für 4 €/Monat oder 36 €/Jahr.

Mehr zu ComputerBase Pro

Bereits Pro-Nutzer? Hier anmelden.

Tracking: Wir und unsere 165 Partner verarbeiten personenbezogene Daten, indem wir mit auf Ihrem Gerät gespeicherten Informationen (z. B. eindeutige Kennungen in Cookies) ein Nutzungsprofil erstellen, um z. B. Anzeigen zu personalisieren. Verarbeitungszwecke: Genaue Standortdaten und Abfrage von Geräteeigenschaften zur Identifikation, Informationen auf einem Gerät speichern und/oder abrufen, Personalisierte Anzeigen und Inhalte, Anzeigen- und Inhaltsmessungen, Erkenntnisse über Zielgruppen und Produktentwicklungen.

Impressum Kontakt Datenschutz