Crystaldiskinfo ähnliches Tool für USB Sticks?

=== START OF INFORMATION SECTION ===
Model Family:     SanDisk based SSDs
Device Model:     SanDisk pSSD
Serial Number:    09e4f7b0c
LU WWN Device Id: 5 001b40 04f9e0c7b
Firmware Version: 3
User Capacity:    62.742.792.192 bytes [62,7 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      1.8 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 2d
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jul 27 12:43:26 2017 MS
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x51) SMART execute Offline immediate.
                                        No Auto Offline data collection support.

                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  11) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_
FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0002   100   100   000    Old_age   Always       -
       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -
       6
 12 Power_Cycle_Count       0x0002   100   100   000    Old_age   Always       -
       60
171 Program_Fail_Count      0x0002   100   100   000    Old_age   Always       -
       0
172 Erase_Fail_Count        0x0002   100   100   000    Old_age   Always       -
       0
173 Avg_Write/Erase_Count   0x0002   100   100   000    Old_age   Always       -
       2
174 Unexpect_Power_Loss_Ct  0x0002   100   100   000    Old_age   Always       -
       42
187 Reported_Uncorrect      0x0002   100   100   000    Old_age   Always       -
       0
230 Perc_Write/Erase_Count  0x0002   100   100   000    Old_age   Always       -
       6
232 Perc_Avail_Resrvd_Space 0x0003   100   100   005    Pre-fail  Always       -
       0
234 Perc_Write/Erase_Ct_BC  0x0002   100   100   000    Old_age   Always       -
       3
241 Total_LBAs_Written      0x0002   100   100   000    Old_age   Always       -
       160644287
242 Total_LBAs_Read         0x0002   100   100   000    Old_age   Always       -
       19229190

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.