DvD-Brenner reagiert nicht mehr - Pioneer DVR-105

dEeP-fRiEd

Cadet 4th Year
Registriert
Okt. 2005
Beiträge
70
Hi,

mein DvD-Brenner (Pioneer DVR-105) reagiert nicht mehr, wobei ich irgendwie glaube (hoffe), dass das ein Treiberproblem ist.

Und zwar passiert einfach gar nix. Das LED leuchtet nur kurz wenn man eine Scheibe (DVD, CD, Rohling) einlegt. Aber Windows versucht sozusagen nicht davon zu lesen.
(Wenn man auf dem Arbeitsplatz aufs Laufwerk klickt kommt "bitte legen sie einen Datenträger in LAufwerk D ein..."

Hab schon versucht den Treiber raus zu nehmen und das Laufwerk neu erkennen zu lassen, hat auch nichts geändert.

Nach weiterem rum probieren (verschiedene CDs/DvDs einlegen...) kam eben auf ein mal ein Bluescreen.

(IRQL_NOT_LESS_OR_EQUAL STOP 0x0000000A)

Hab schon versucht den Minidump zu analysieren, aber hab es bisher nicht hin bekommen (schon ne Weile her, dass ich die Debugging Tools benutzt habe)

Also das ist der Minidump: http://www.blood-angelz.com/uploads/absturz_090806.zip

Vielleicht könnte da ja jemand ma rein schauen!?

Vielen Dank

Edit:
Ok jetzt hab ich die Debugging Tools doch noch dazu bekommen mal drüber zu laufen, aber viel sagt mir das jetzt auch nicht:
Code:
Microsoft (R) Windows Debugger  Version 6.5.0003.7
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini080906-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*[url]http://msdl.microsoft.com/download/symbols[/url]
Executable search path is: 
Windows XP Kernel Version 2600 (Service Pack 1) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 2600.xpsp2.030422-1633
Kernel base = 0x804d4000 PsLoadedModuleList = 0x80543530
Debug session time: Wed Aug  9 13:38:44.859 2006 (GMT+2)
System Uptime: 0 days 0:29:34.421
Loading Kernel Symbols
....................................................................................................................................................
Loading unloaded module list
............
Loading User Symbols
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {f5, 2, 0, 804e01a0}

*** WARNING: Unable to verify timestamp for avgntmgr.sys
*** ERROR: Module load completed but symbols could not be loaded for avgntmgr.sys
Unable to load image vsdatant.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for vsdatant.sys
*** ERROR: Module load completed but symbols could not be loaded for vsdatant.sys
Probably caused by : avgntmgr.sys ( avgntmgr+1486 )

Followup: MachineOwner
---------

kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 000000f5, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: 804e01a0, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS:  000000f5 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!CcFlushCache+76
804e01a0 f6466d20         test    byte ptr [esi+0x6d],0x20

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  DRIVER_FAULT

BUGCHECK_STR:  0xA

LAST_CONTROL_TRANSFER:  from f734d88f to 804e01a0

TRAP_FRAME:  f6b38b54 -- (.trap fffffffff6b38b54)
ErrCode = 00000000
eax=887a320c ebx=00000000 ecx=00000000 edx=00000000 esi=00000088 edi=00000000
eip=804e01a0 esp=f6b38bc8 ebp=f6b38c34 iopl=0         nv up ei pl zr na po nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010246
nt!CcFlushCache+0x76:
804e01a0 f6466d20         test   byte ptr [esi+0x6d],0x20 ds:0023:000000f5=??
Resetting default scope

STACK_TEXT:  
f6b38c34 f734d88f 887a320c 00000000 00000000 nt!CcFlushCache+0x76
f6b38c60 f73584b3 88861d20 e2f01500 00000000 Ntfs!NtfsFlushUserStream+0x6a
f6b38cec f7358108 88861d20 898b2438 00000001 Ntfs!NtfsFlushVolume+0x22a
f6b38d8c f734c7ca 88861d20 8893b008 f74fa068 Ntfs!NtfsCommonVolumeOpen+0x341
f6b38e64 804ea221 898b2358 8893b008 898df280 Ntfs!NtfsFsdCreate+0x14e
f6b38e74 f73bb2aa f74fa068 898df280 f74fa068 nt!IopfCallDriver+0x31
f6b38ec0 804ea221 8968de88 8893b008 00000000 sr!SrCreate+0x12a
f6b38ed0 f74f8486 8893b008 89824a88 00040000 nt!IopfCallDriver+0x31
WARNING: Stack unwind information not available. Following frames may be wrong.
f6b38f00 f74f8638 89824a88 8893b008 00000000 avgntmgr+0x1486
f6b38f20 804ea221 89824a88 8893b008 8893b008 avgntmgr+0x1638
f6b38f30 80560609 898d6e18 8894b24c f6b390dc nt!IopfCallDriver+0x31
f6b39014 8059a2c6 898d6e30 00000000 8894b1a8 nt!IopParseDevice+0xa4d
f6b3909c 80596c27 00000000 f6b390dc 00000040 nt!ObpLookupObjectName+0x56a
f6b390f0 80553f0d 00000000 00000000 00000001 nt!ObOpenObjectByName+0xe9
f6b3916c 80554688 00afe124 c0100080 00afe0c4 nt!IopCreateFile+0x407
f6b391b4 80556b3c 00afe124 c0100080 00afe0c4 nt!IoCreateFile+0x36
f6b391f4 ecba0c88 00afe124 c0100080 00afe0c4 nt!NtCreateFile+0x2e
f6b39280 8052d571 00afe124 c0100080 00afe0c4 vsdatant+0x18c88
f6b39280 7ffe0304 00afe124 c0100080 00afe0c4 nt!KiSystemService+0xc4
00afe11c 00000000 00000000 00000000 00000000 SharedUserData!SystemCallStub+0x4


FOLLOWUP_IP: 
avgntmgr+1486
f74f8486 ??               ???

SYMBOL_STACK_INDEX:  8

FOLLOWUP_NAME:  MachineOwner

SYMBOL_NAME:  avgntmgr+1486

MODULE_NAME:  avgntmgr

IMAGE_NAME:  avgntmgr.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4283397d

STACK_COMMAND:  .trap fffffffff6b38b54 ; kb

FAILURE_BUCKET_ID:  0xA_avgntmgr+1486

BUCKET_ID:  0xA_avgntmgr+1486

Followup: MachineOwner
---------

Ich nehme an die wichtige Zeile ist Probably caused by : avgntmgr.sys Also ist wohl Antivir am Absturz schuld!?
Aber was ist jetzt mit meinem Laufwerk los, jemand ne Idee?
 
Zuletzt bearbeitet:
Hi ich habe im ComputerBase Forum von deinem Problem mit einem DVD-Brenner gelesen. Der Beitrag war glaub ich schon etwas älter. Du hast von einem Problem geschrieben, dass dein Laufwerk nicht mehr angesprochen wird oder so ähnlich.
Kannst du mir sagen, wie du das Problem gelöst hast? Ich habe das gleiche Problem!
 
Zurück
Oben