nForce 4 Treiber integrieren (RIS)

[data]
floppyless = "1"
msdosinitiated = "1"
OriSrc = "\\%SERVERNAME%\RemInst\%INSTALLPATH%\%MACHINETYPE%"
OriTyp = "4"
LocalSourceOnCD = 1
DisableAdminAccountOnDomainJoin = 1

[SetupData]
OsLoadOptions = "/noguiboot /fastdetect"
SetupSourceDevice = "\Device\LanmanRedirector\%SERVERNAME%\RemInst\%INSTALLPATH%"

[Unattended]
OemPreinstall = yes
ExtendOEMPartition = 0
TargetPath = \WINDOWS
OemSkipEula = yes
InstallFilesPath = "\\%SERVERNAME%\RemInst\%INSTALLPATH%\%MACHINETYPE%"
LegacyNIC = 1
OEMPnPDriversPath = "\Drivers;\Drivers\graphix;\Drivers\nic;\Drivers\NAM;\Drivers\atk;\Drivers\amd;\Drivers\sata;\Drivers\sata\sata_ide;\Drivers\sata\sataraid;\Drivers\bus"

[MassStorageDrivers]
"NVIDIA RAID CLASS DRIVER (required)"=OEM
"NVIDIA nForce Storage Controller (required)"=OEM


[OEMBootFiles]
nvatabus.sys
nvraid.cat
nvraid.inf
nvraid.sys
idecoi.dll
disk1
nvraidco.dll
txtsetup.OEM


[UserData]
FullName = "%USERFIRSTNAME% %USERLASTNAME%"
OrgName = "%ORGNAME%"
ComputerName = %MACHINENAME%

[GuiUnattended]
OemSkipWelcome = 1
OemSkipRegional = 1
TimeZone = %TIMEZONE%
AdminPassword = "*"


[Display]
BitsPerPel = 16
XResolution = 800
YResolution = 600
VRefresh = 60

[Networking]

[NetServices]
MS_Server=params.MS_PSched

[Identification]
JoinDomain = %MACHINEDOMAIN%
DoOldStyleDomainJoin = Yes

[RemoteInstall]
Repartition = No
UseWholeDisk = No



[OSChooser]
Description="Windows Professional"
Help="Hiermit wird Windows Professional mit einer Standardkonfiguration installiert."
LaunchFile="%INSTALLPATH%\%MACHINETYPE%\templates\startrom.com"
ImageType="Flat"

;
; format for txtsetup.oem.
;
; Follow this format for non-PNP adapters ISA
;
; Follow the txtsetup.oem in initio for PNP adapters like PCI and ISAPNP
;
; Txtsetup.oem is a generic way to install Storage adapters to get them through
; textmode setup. Do as little as possible and allow GUI mode setup to do the 
; remaining work using the supplied inf.
;
; General format:
;
; [section]
; key = value1,value2,...
;
;
; The hash ('#') or semicolon (';') introduces a comment.
; Strings with embedded spaces, commas, or hashes should be double-quoted
;


; This section lists all disks in the disk set.
;
; <description> is a descriptive name for a disk, used when
; prompting for the disk
; <tagfile> is a file whose presence allows setup to recognize
; that the disk is inserted.
; <directory> is where the files are located on the disk.
;
[Disks]
d1 = "NVIDIA RAID DRIVER (SCSI)",\disk1,\

; This section lists the default selection for each 'required'
; hardware component. If a line is not present for a component,
; the default defaults to the first item in the [<component_name>]
; section (see below).
;
; <component_name> is one of computer, display, keyboard, mouse, scsi
; <id> is a unique <within the component> string to be associated
; with an option.
[Defaults]
scsi = RAIDCLASS


; This section lists the options available for a particular component.
;
; <id> is the unique string for the option
; <description> is a text string, presented to the user in a menu
; <key_name> gives the name of the key to be created for the component in
; HKEY_LOCAL_MACHINE\ControlSet001\Services
[scsi]
RAIDCLASS = "NVIDIA RAID CLASS DRIVER (required)"
BUSDRV = "NVIDIA nForce Storage Controller (required)"


; This section lists the files that should be copied if the user
; selects a particular component option.
;
; <file_type> is one of driver, port, class, dll, hal, inf, or detect.
; See below.
; <source_disk> identifies where the file is to be copied from, and must
; match en entry in the [Disks] section.
; <filename> is the name of the file. This will be appended to the
; directory specified for the disk in the [Disks] section to form the
; full path of the file on the disk.
; <driverkey> this is the name that will show under the services\driver key
; this should be the same name as the driver that is being installed.
[Files.scsi.RAIDCLASS]
driver = d1,nvraid.sys,RAIDCLASS
inf = d1,nvraid.inf
dll = d1,nvraidco.dll
catalog = d1,nvraid.cat

[Files.scsi.BUSDRV]
driver = d1,nvatabus.sys,BUSDRV
inf = d1, nvraid.inf
dll = d1,idecoi.dll
catalog = d1, nvraid.cat

; This section specifies values to be set in the registry for
; particular component options. Required values in the services\xxx
; key are created automatically -- use this section to specify additional
; keys to be created in services\xxx and values in services\xxx and
; services\xxx\yyy.
;
; This section must be filled out for storage controllers that 
; are PNP adapters like PCI and ISA PNP adapters. Failure to do this 
; can cause the driver to fail to load. Must also add the section
; [HardwareIds.scsi.ID] to identify the supported ID's.
;
; <value_name> specifies the value to be set within the key
; <value_type> is a string like REG_DWORD. See below.
; <value> specifies the actual value; its format depends on <value_type>
;
[Config.RAIDCLASS]

[Config.BUSDRV]

; A HardwareIds.scsi.Service section specifies the hardware IDs of 
; the devices that a particular mass-storage driver supports. 
;
; [HardwareIds.scsi.Service]
; id = "deviceID","service"
;
; HardwareIds.scsi.Service 
; Service specifies the service to be installed. 
;
; <deviceId > Specifies the device ID for a mass-storage device. 
; <service > Specifies the service to be installed for the device. 
;The following example excerpt shows a HardwareIds.scsi.Service section for a disk device:
;

[HardwareIds.scsi.RAIDCLASS]
id = "GenNvRaidDisk","nvraid"
id = "*_NVRAIDBUS","nvraid"
id = "*NVRAIDBUS","nvraid"

[HardwareIds.scsi.BUSDRV]
id = "PCI\VEN_10DE&DEV_008E", "nvatabus"
id = "PCI\VEN_10DE&DEV_00D5", "nvatabus"
id = "PCI\VEN_10DE&DEV_00EE", "nvatabus"
id = "PCI\VEN_10DE&DEV_00E3", "nvatabus"
id = "PCI\VEN_10DE&DEV_0036", "nvatabus"
id = "PCI\VEN_10DE&DEV_003E", "nvatabus"
id = "PCI\VEN_10DE&DEV_0054", "nvatabus"
id = "PCI\VEN_10DE&DEV_0055", "nvatabus"
id = "PCI\VEN_10DE&DEV_0266", "nvatabus"
id = "PCI\VEN_10DE&DEV_0267", "nvatabus"
id = "PCI\VEN_10DE&DEV_036F", "nvatabus"
id = "PCI\VEN_10DE&DEV_037E", "nvatabus"
id = "PCI\VEN_10DE&DEV_037F", "nvatabus"
id = "PCI\VEN_10DE&DEV_03F6", "nvatabus"
id = "PCI\VEN_10DE&DEV_03F7", "nvatabus"
id = "PCI\VEN_10DE&DEV_03E7", "nvatabus"