EasyBox 904 xdsl und openwrt...

[Luelle10]

Hallo,
ich habe jetzt fast die EasyBox anlaufen mit openwrt habe aber noch Probleme , hoffe jemand kann mir helfen.
Also riesen Problem ist das ich mich einfach nicht mehr in luci einloggen kann , keine Ahnung was da los ist über SSH geht es .Habe schon jetzt mehrmals Image neugeflasht.
Und wie sieht das aus mit WLAN wpa2 ?? In luci steht da nix von und wenn ich mich auf SSH Versuche /etc/config/Wireless zu bearbeiten kommt die Meldung keine Berechtigung bin als Root eingeloggt..
Und noch eine Frage wenn ich mich in luci einlogge wenn es geht Versuche darüber Updates zu machen endet das immer nach ein reboot nicht mehr startet... Ist das normal ???

 

[lokon]

Zur Analyse fehlen Logdateien bzw. genauere Fehlerbeschreibung - sonst ist es nur rätselraten.

/etc/config/Wireless zu bearbeiten kommt die Meldung keine Berechtigung bin als Root eingeloggt

Die Ausgaben von dmesg und logread sind wichtig. (hier als Anhang oder Code Fragment bzw auf paste Services hochladen - je nach Größe)
Wie verbindest du dich per SSH (SSH-Befehl)?
Groß- und Kleinschreibung ist wichtig bei Linux

Also riesen Problem ist das ich mich einfach nicht mehr in luci einloggen kann , keine Ahnung was da los ist über SSH geht es .Habe schon jetzt mehrmals Image neugeflasht.

Du erwähnst nicht welches Image du flashen möchtest die Easybox 904 xDSL wird noch nicht von OpenWrt unterstüzt - die Patches sind bisher nicht integriert worden, sondern noch "extra" so wie ich das im Quellcode des Projektes sehe - #2060,#2061,#2531 und Fork (ein Entwickler hat OpenWrt modifiziert) - bestimmte Entwickler testen diese scheinbar auch - aber offiziell ist es wohl noch nicht unterstützt bzw. sind die Patches nicht integriert.
Bei OpenWrt haben bestimmte Images kein Web-Interface - eventuell flashst du solch ein Image.

Der / die Patch-Einreicher haben nicht weiter reagiert bzw. nachgebessert um die Box "fertig" zu unterstützen - es fehlt an Entwicklern, die an der Sache dranbleiben und genug Zeit haben.

Falls du ein Einsteiger bist: Ich würde dir deshalb raten die Box nicht weiter zu benutzen, sondern einem Entwickler/Freifunker der vlt. daran Interesse hat zu überlassen

 

[Luelle10]

Hallo,
Also das mit den einloggen über luci funktioniert jetzt ... Was habe gemacht einfach Box vom Strom nehmen und warten...
So läuft ja alles an der Box nur halt WPA 2 nicht ...
Image ist das https://github.com/zuzia-dev/Easybox-904xDSL SMP

 

[lokon]

dmesg + logread ausgabe fehlen - die enthalten eventuell Informationen was der WLAN treiber bzw. das Anwendungsprogramm macht.
die Referenz für wifi - deine Konfigurationsdatei (die nicht funktioniert?) hast du auch noch nicht gepostet

Das Image wurde vermutlich vom gleichnamigen OpenWrt Forumuser (Zuzia) erstellt - du kannst dort oder bei Github ein Issue erstellen - da er das Image erstellt hat, weiß er vielleicht auch ob etwas "nicht funktioniert" -
im wiki steht

• Wi-Fi (Basic AP only, connected to VLAN 66, needs to be configured through /etc/network/wifi)

vielleicht gilt das auch für dein Image - es ist ja eine Abspaltung/"Hack"

 

[Luelle10]

Dsmeg
Logread
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'lan' is enabled
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'lan' is setting up now
Tue Aug 18 18:25:12 2020 daemon.debug dnsmasq[1938]: listening on br-lan(#8): 192.168.1.1 port 5353
Tue Aug 18 18:25:12 2020 daemon.warn dnsmasq[1938]: failed to create listening socket for 127.0.0.1: Address not available
Tue Aug 18 18:25:12 2020 daemon.warn dnsmasq[1938]: failed to create listening socket for 127.0.0.1: Address not available
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'lan' is now up
Tue Aug 18 18:25:12 2020 kern.info kernel: [ 61.874451] br-lan: port 2(eth0.66) entered blocking state
Tue Aug 18 18:25:12 2020 kern.info kernel: [ 61.878707] br-lan: port 2(eth0.66) entered disabled state
Tue Aug 18 18:25:12 2020 kern.info kernel: [ 61.884778] device eth0.66 entered promiscuous mode
Tue Aug 18 18:25:12 2020 kern.info kernel: [ 61.889403] br-lan: port 2(eth0.66) entered blocking state
Tue Aug 18 18:25:12 2020 kern.info kernel: [ 61.894456] br-lan: port 2(eth0.66) entered forwarding state
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'NCM' is setting up now
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'inic' is enabled
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'loopback' is enabled
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Aug 18 18:25:12 2020 daemon.debug dnsmasq[1938]: listening on lo(#1): 127.0.0.1 port 5353
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'loopback' is now up
Tue Aug 18 18:25:12 2020 daemon.notice netifd: bridge 'br-lan' link is up
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Network device 'eth0' link is up
Tue Aug 18 18:25:12 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Aug 18 18:25:12 2020 daemon.notice netifd: VLAN 'eth0.66' link is up
Tue Aug 18 18:25:12 2020 daemon.notice netifd: VLAN 'eth0.3' link is up
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'inic' has link connectivity
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'inic' is setting up now
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'inic' is now up
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Network device 'lo' link is up
Tue Aug 18 18:25:12 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Aug 18 18:25:12 2020 daemon.notice netifd: NCM (2826): Control device not valid
Tue Aug 18 18:25:12 2020 daemon.notice netifd: NCM (2853): Control device not valid
Tue Aug 18 18:25:13 2020 daemon.notice netifd: Interface 'NCM' is now down
Tue Aug 18 18:25:13 2020 daemon.notice procd: /etc/rc.d/S60rt3883: Insmod with MAC1=00:11:22:33:44:5b and MAC2=00:11:22:33:44:5d
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.352576] Warnning!! syncmiimac is foreced to 0 in dual concurrent mode.
Tue Aug 18 18:25:13 2020 kern.info kernel: [ 63.358177] RT3883iNIC: 802.11n WLAN MII driver v2.4.0.6 (Feb. 09, 2011)
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.365032] eth0.3: Master at 0x0, 00:11:22:33:44:55
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.369822] Use default profile path.
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.373418] -----> mii_hardware_reset
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.390735] -----> mii_hardware_reset
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.393002] Update MAC(0)=00:11:22:33:44:5b
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.397207] ============= Init Thread ===================
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.470643] RacfgTaskThread pid = 2907
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.482802] RacfgBacklogThread pid = 2913
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.487438] wl000: Ralink iNIC at 0x0, 00:11:22:33:44:5b
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.504400] Update MAC(0)=00:11:22:33:44:5d
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.507253] ============= Init Thread ===================
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.574770] RacfgTaskThread pid = 2919
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.585348] RacfgBacklogThread pid = 2921
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.589940] wl010: Ralink iNIC at 0x0, 00:11:22:33:44:5d
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.631061] iNIC Open wl000
Tue Aug 18 18:25:13 2020 kern.warn kernel: [ 63.632439] -----> mii_hardware_reset
Tue Aug 18 18:25:13 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Aug 18 18:25:14 2020 kern.warn kernel: [ 64.650724] -----> mii_hardware_reset
Tue Aug 18 18:25:14 2020 kern.warn kernel: [ 64.652990] Op mode = 1
Tue Aug 18 18:25:14 2020 kern.warn kernel: [ 64.655508] ConcurrentObj.CardCount=0
Tue Aug 18 18:25:14 2020 kern.warn kernel: [ 64.659144] Read profile[0]
Tue Aug 18 18:25:14 2020 kern.err kernel: [ 64.661860] net wl000: Request profile: iNIC/RT3883/iNIC_ap.dat
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.680926] RACFG_CMD_BOOT_NOTIFY
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.683275] Firmware path iNIC/RT3883/iNIC_ap.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.687639] Profile[0] path iNIC/RT3883/iNIC_ap.dat, read path iNIC/RT3883/iNIC_ap.dat
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.695534] EEPROM[0] path iNIC/RT3883/iNIC_e2p.bin, read path iNIC/RT3883/iNIC_e2p.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.703540] Profile[1] path iNIC/RT3883/iNIC_ap1.dat, read path iNIC/RT3883/iNIC_ap1.dat
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.711630] EEPROM[1] path iNIC/RT3883/iNIC_e2p1.bin, read path iNIC/RT3883/iNIC_e2p1.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.719803] Release firmware: iNIC/RT3883/iNIC_ap.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.724863] Request file: iNIC/RT3883/iNIC_ap.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.824107] Loaded firmware size: 2201
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.826632] BssidNum=2
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.831087] Done reading profile[0]
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.833119] Read profile[1]
Tue Aug 18 18:25:15 2020 kern.err kernel: [ 64.835994] net wl010: Request profile: iNIC/RT3883/iNIC_ap1.dat
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.946914] Loaded firmware size: 2129
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.949338] BssidNum=2
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.953598] Done reading profile[1]
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.955743] rlk_inic_mbss_init (pAd->RaCfgObj.BssidNum=2)
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.961141] rlk_inic_mbss_init --->
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.964720] Register MBSSID IF (wl001)
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.970311] register_netdev done
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.972181] rlk_inic_mbss_init <---
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.975693] ConcurrentObj.CardCount=0 init_flag=0
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.980387] Wait for boot done...
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 64.983682] Call RaCfgWaitSyncRsp
Tue Aug 18 18:25:15 2020 authpriv.info dropbear[3004]: Not backgrounding
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.274759] Release firmware: iNIC/RT3883/iNIC_ap.dat
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.278414] Request file: iNIC/RT3883/iNIC_ap.dat
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.298873] Open ExtEEPROM file: iNIC/RT3883/iNIC_e2p.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.302970] Release firmware: iNIC/RT3883/iNIC_e2p.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.308151] Request file: iNIC/RT3883/iNIC_e2p.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.346849] Release firmware: iNIC/RT3883/iNIC_ap1.dat
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.350663] Request file: iNIC/RT3883/iNIC_ap1.dat
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.358837] Open ExtEEPROM file: iNIC/RT3883/iNIC_e2p1.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.363056] Release firmware: iNIC/RT3883/iNIC_e2p1.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.368234] Request file: iNIC/RT3883/iNIC_e2p1.bin
Tue Aug 18 18:25:15 2020 kern.warn kernel: [ 65.402858] Upload Profile 1024 bytes from file, 0 from extra...
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.681872] RACFG_CMD_BOOT_INITCFG(0)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.695533] Upload Profile 1024 bytes from file, 0 from extra...
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.700716] RACFG_CMD_BOOT_INITCFG(1)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.704641] Upload Profile 1024 bytes from file, 0 from extra...
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.710384] RACFG_CMD_BOOT_INITCFG(2)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.722775] Upload Profile 1024 bytes from file, 0 from extra...
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.727939] RACFG_CMD_BOOT_INITCFG(3)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.731653] Upload Profile 1024 bytes from file, 78 from extra...
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.737801] RACFG_CMD_BOOT_INITCFG(4)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.742309] Upload Profile 550 bytes from file, 0 from extra...
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.747326] RACFG_CMD_BOOT_INITCFG(5)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.752679] Upload Profile 0 bytes from file, 0 from extra...
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.757150] Send Init Cfg Data Done(6 packets)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.761555] Release firmware: iNIC/RT3883/iNIC_ap.dat
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.766600] Release firmware: iNIC/RT3883/iNIC_e2p.bin
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.771731] Release firmware: iNIC/RT3883/iNIC_ap1.dat
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.776865] Release firmware: iNIC/RT3883/iNIC_e2p1.bin
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.782691] RACFG_CMD_BOOT_UPLOAD(0)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.788390] RACFG_CMD_BOOT_UPLOAD(1)
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 65.791284] RACFG_CMD_BOOT_UPLOAD(2)
Tue Aug 18 18:25:16 2020 kern.info kernel: [ 66.204309] net wl000: CRC: 01 08 14 18 07 3a 97 85 22 32 2e 35 2e 31 2e 33 22 00 00 00 32 30 31 34 31 32 31 32 00 00 00 00 00 00 00 00 58 cb 08 00
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.230764] Send RT3883iNIC Firmware Done
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.233369] ===================================
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.238044] version: "2.5.1.3"
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.241123] size: 576344 bytes
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.244319] date: 20141212
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.247296] ===================================
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.247296]
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.253305] Send STARTUP to RT3883iNIC
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.257203] Close Firmware file
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.260158] Release firmware: iNIC/RT3883/iNIC_ap.bin
Tue Aug 18 18:25:16 2020 kern.warn kernel: [ 66.266614] RACFG_CMD_BOOT_STARTUP
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.073672] RACFG_CMD_GET_MAC, len: 35
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.076171] Get concurrent card MAC address:00:11:22:33:44:5b00:11:22:33:44:5d
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.083381] Update MAC(0)=00:11:22:33:44:5b
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.087568] Update MAC(1)=02:11:22:33:44:5b
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.091740] Update MAC(0)=00:11:22:33:44:5d
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.095891] Warning! MAC addr not equal to MII master =>
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.095919] set MiiMasterMac=00:11:22:33:44:55
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.105707] You've assigned a different MAC.
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.109996] OK! Got target's MAC address, boot done.
Tue Aug 18 18:25:24 2020 user.notice sysctl: net.ipv6.conf.wl000.disable_ipv6 = 1
Tue Aug 18 18:25:24 2020 user.notice sysctl: net.ipv6.conf.wl000.accept_dad = 0
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.213011] iNIC Open wl010
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.214395] Op mode = 1
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.216948] ConcurrentObj.CardCount=1
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.220587] rlk_inic_mbss_init (pAd->RaCfgObj.BssidNum=2)
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.225974] rlk_inic_mbss_init --->
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.229551] Register MBSSID IF (wl011)
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.235329] register_netdev done
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.237181] rlk_inic_mbss_init <---
Tue Aug 18 18:25:24 2020 kern.warn kernel: [ 74.240702] ConcurrentObj.CardCount=1 init_flag=1
Tue Aug 18 18:25:25 2020 daemon.notice procd: /etc/rc.d/S60rt3883: 'wl000' is disabled
Tue Aug 18 18:25:25 2020 daemon.notice procd: /etc/rc.d/S60rt3883: scan device: wl000
Tue Aug 18 18:25:25 2020 daemon.notice procd: /etc/rc.d/S60rt3883: Shutdown interface wl000
Tue Aug 18 18:25:25 2020 daemon.notice procd: /etc/rc.d/S60rt3883: 'wl010' is disabled
Tue Aug 18 18:25:25 2020 daemon.notice procd: /etc/rc.d/S60rt3883: scan device: wl010
Tue Aug 18 18:25:26 2020 daemon.notice procd: /etc/rc.d/S60rt3883: Shutdown interface wl010
Tue Aug 18 18:25:26 2020 user.notice sysctl: net.ipv6.conf.wl010.disable_ipv6 = 1
Tue Aug 18 18:25:26 2020 user.notice sysctl: net.ipv6.conf.wl010.accept_dad = 0
Tue Aug 18 18:25:26 2020 daemon.notice procd: /etc/rc.d/S60rt3883: 'wl000' is disabled
Tue Aug 18 18:25:26 2020 daemon.notice procd: /etc/rc.d/S60rt3883: scan device: wl000
Tue Aug 18 18:25:26 2020 daemon.notice procd: /etc/rc.d/S60rt3883: Shutdown interface wl000
Tue Aug 18 18:25:26 2020 daemon.notice procd: /etc/rc.d/S60rt3883: 'wl010' is disabled
Tue Aug 18 18:25:26 2020 daemon.notice procd: /etc/rc.d/S60rt3883: scan device: wl010
Tue Aug 18 18:25:26 2020 daemon.notice procd: /etc/rc.d/S60rt3883: Shutdown interface wl010
Tue Aug 18 18:25:26 2020 user.notice nlbwmon: Reloading nlbwmon due to ifup of lan (br-lan)
Tue Aug 18 18:25:27 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Tue Aug 18 18:25:27 2020 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Tue Aug 18 18:25:27 2020 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Tue Aug 18 18:25:28 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Tue Aug 18 18:25:28 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Tue Aug 18 18:25:28 2020 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Tue Aug 18 18:25:29 2020 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[1938]: exiting on receipt of SIGTERM
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: Connected to system UBus
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: started, version 2.82 cachesize 150
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP conntrack ipset auth DNSSEC no-ID loop-detect inotify dumpfile
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: UBus support enabled: connected to system bus
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: DNSSEC validation enabled
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: configured with trust anchor for <root> keytag 20326
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: configured with trust anchor for <root> keytag 20326
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: configured with trust anchor for <root> keytag 19036
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq-dhcp[4314]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 1h
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using only locally-known addresses for domain test
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using only locally-known addresses for domain onion
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using only locally-known addresses for domain localhost
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using only locally-known addresses for domain local
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using only locally-known addresses for domain invalid
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using only locally-known addresses for domain bind
Tue Aug 18 18:25:29 2020 daemon.warn dnsmasq[4314]: ignoring nameserver 127.0.0.1 - local interface
Tue Aug 18 18:25:29 2020 daemon.warn dnsmasq[4314]: ignoring nameserver 127.0.0.1 - local interface
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using only locally-known addresses for domain lan
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using only locally-known addresses for domain lan
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: using nameserver 127.0.0.1#5453
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: read /etc/hosts - 8 addresses
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq[4314]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Aug 18 18:25:29 2020 daemon.info dnsmasq-dhcp[4314]: read /etc/ethers - 0 addresses
Tue Aug 18 18:25:30 2020 daemon.info dnsmasq[4314]: read /etc/hosts - 8 addresses
Tue Aug 18 18:25:30 2020 daemon.info dnsmasq[4314]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Aug 18 18:25:30 2020 daemon.info dnsmasq-dhcp[4314]: read /etc/ethers - 0 addresses
Tue Aug 18 18:25:30 2020 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Tue Aug 18 18:25:30 2020 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Tue Aug 18 18:25:31 2020 user.notice nlbwmon: Reloading nlbwmon due to ifup of loopback (lo)
Tue Aug 18 18:25:31 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Tue Aug 18 18:25:31 2020 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Tue Aug 18 18:25:34 2020 user.notice nlbwmon: Reloading nlbwmon due to ifup of inic (eth0.3)
Tue Aug 18 18:25:36 2020 daemon.notice procd: /etc/rc.d/S95done: .sys.class.net.br-lan.bridge.vlan_filtering = 1
Tue Aug 18 18:25:36 2020 daemon.notice procd: /etc/rc.d/S95done: /dev/sda1: No such file or directory
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: /etc/rc.local: line 46: can't create /sys/class/net/br-wan/queues/rx-0/rps_cpus: nonexistent directory
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: sh: write error: Broken pipe
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: /etc/rc.local: line 47: can't create /sys/class/net/eth0.7/queues/rx-0/rps_cpus: nonexistent directory
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: sh: write error: Broken pipe
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: /etc/rc.local: line 48: can't create /sys/class/net/pppoe-wan/queues/rx-0/rps_cpus: nonexistent directory
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: sh: write error: Broken pipe
Tue Aug 18 18:25:37 2020 daemon.info dnsmasq[4314]: exiting on receipt of SIGTERM
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: /etc/rc.local: line 49: can't create /sys/class/net/dsl0/queues/rx-0/rps_cpus: nonexistent directory
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: sh: write error: Broken pipe
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: /etc/rc.local: line 50: can't create /sys/class/net/dsl0.7/queues/rx-0/rps_cpus: nonexistent directory
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: sh: write error: Broken pipe
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: /etc/rc.local: line 51: can't create /sys/class/net/ptm0/queues/rx-0/rps_cpus: nonexistent directory
Tue Aug 18 18:25:37 2020 daemon.notice procd: /etc/rc.d/S95done: sh: write error: Broken pipe
Tue Aug 18 18:25:38 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Aug 18 18:25:39 2020 daemon.notice procd: /etc/rc.d/S97dsl_control: failed to find /lib/fw.bin
Tue Aug 18 18:25:39 2020 daemon.err stubby[4839]: [16:25:39.628704] STUBBY: Stubby version: Stubby 0.3.0
Tue Aug 18 18:25:40 2020 daemon.err stubby[4839]: [16:25:40.026209] STUBBY: Read config from file /var/etc/stubby/stubby.yml
Tue Aug 18 18:25:40 2020 daemon.err stubby[4839]: [16:25:40.030459] STUBBY: DNSSEC Validation is OFF
Tue Aug 18 18:25:40 2020 daemon.err stubby[4839]: [16:25:40.031685] STUBBY: Transport list is:
Tue Aug 18 18:25:40 2020 daemon.err stubby[4839]: [16:25:40.032840] STUBBY: - TLS
Tue Aug 18 18:25:40 2020 daemon.err stubby[4839]: [16:25:40.034079] STUBBY: Privacy Usage Profile is Strict (Authentication required)
Tue Aug 18 18:25:40 2020 daemon.err stubby[4839]: [16:25:40.035330] STUBBY: (NOTE a Strict Profile only applies when TLS is the ONLY transport!!)
Tue Aug 18 18:25:40 2020 daemon.err stubby[4839]: [16:25:40.036605] STUBBY: Starting DAEMON....
Tue Aug 18 18:25:41 2020 kern.info kernel: [ 91.159088] Console: switching to colour dummy device 80x25
Tue Aug 18 18:25:43 2020 user.err LCD4Linux[4904]: plugin_netinfo: ioctl(IFADDR pppoe-wan) failed: No such device
Tue Aug 18 18:25:43 2020 user.err LCD4Linux[4904]: (skip next 1000 errors)
Tue Aug 18 18:25:44 2020 daemon.notice procd: /etc/rc.d/S99nfsd: exportfs: /mnt/sda1 does not support NFS export
Tue Aug 18 18:25:44 2020 daemon.notice unbound: [5010:0] notice: init module 0: iterator
Tue Aug 18 18:25:45 2020 daemon.info unbound: [5010:0] info: start of service (unbound 1.11.0).
Tue Aug 18 18:25:45 2020 daemon.info unbound: [5010:0] info: service stopped (unbound 1.11.0).
Tue Aug 18 18:25:45 2020 daemon.info unbound: [5010:0] info: server stats for thread 0: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch, 0 rejected by ip ratelimiting
Tue Aug 18 18:25:45 2020 daemon.info unbound: [5010:0] info: server stats for thread 0: requestlist max 0 avg 0 exceeded 0 jostled 0
Tue Aug 18 18:25:45 2020 kern.warn kernel: [ 95.037513] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Tue Aug 18 18:25:45 2020 kern.warn kernel: [ 95.044223] NFSD: Using legacy client tracking operations.
Tue Aug 18 18:25:45 2020 kern.info kernel: [ 95.049532] NFSD: starting 10-second grace period (net f0000068)
Tue Aug 18 18:25:45 2020 daemon.notice rpc.statd[5103]: Version 2.5.1 starting
Tue Aug 18 18:25:45 2020 daemon.warn rpc.statd[5103]: Flags: No-Daemon TI-RPC
Tue Aug 18 18:25:45 2020 daemon.notice rpc.mountd[5104]: Version 2.5.1 starting
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: Connected to system UBus
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: started, version 2.82 cachesize 150
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP conntrack ipset auth DNSSEC no-ID loop-detect inotify dumpfile
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: UBus support enabled: connected to system bus
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: DNSSEC validation enabled
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: configured with trust anchor for <root> keytag 20326
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: configured with trust anchor for <root> keytag 20326
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: configured with trust anchor for <root> keytag 19036
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq-dhcp[5108]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 1h
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using only locally-known addresses for domain test
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using only locally-known addresses for domain onion
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using only locally-known addresses for domain localhost
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using only locally-known addresses for domain local
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using only locally-known addresses for domain invalid
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using only locally-known addresses for domain bind
Tue Aug 18 18:25:45 2020 daemon.warn dnsmasq[5108]: ignoring nameserver 127.0.0.1 - local interface
Tue Aug 18 18:25:45 2020 daemon.warn dnsmasq[5108]: ignoring nameserver 127.0.0.1 - local interface
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using only locally-known addresses for domain lan
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using only locally-known addresses for domain lan
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: using nameserver 127.0.0.1#5453
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: read /etc/hosts - 8 addresses
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq[5108]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Tue Aug 18 18:25:45 2020 daemon.info dnsmasq-dhcp[5108]: read /etc/ethers - 0 addresses
Tue Aug 18 18:25:45 2020 daemon.notice rpc.statd[5103]: Initializing NSM state
Tue Aug 18 18:25:45 2020 daemon.warn rpc.statd[5103]: Running as root. chown /var/lib/nfs to choose different user
Tue Aug 18 18:25:46 2020 daemon.info procd: - init complete -
Tue Aug 18 18:25:54 2020 daemon.notice unbound: [5293:0] notice: init module 0: iterator
Tue Aug 18 18:25:54 2020 daemon.info unbound: [5293:0] info: start of service (unbound 1.11.0).
Tue Aug 18 18:32:46 2020 authpriv.info dropbear[5324]: Child connection from 192.168.1.2:37664
Tue Aug 18 18:33:02 2020 authpriv.warn dropbear[5324]: Bad password attempt for 'root' from 192.168.1.2:37664
Tue Aug 18 18:33:10 2020 authpriv.warn dropbear[5324]: Bad password attempt for 'root' from 192.168.1.2:37664
Tue Aug 18 18:33:19 2020 authpriv.warn dropbear[5324]: Bad password attempt for 'root' from 192.168.1.2:37664
Tue Aug 18 18:33:19 2020 authpriv.info dropbear[5324]: Exit before auth from <192.168.1.2:37664>: (user 'root', 3 fails): Max auth tries reached - user 'root'
Tue Aug 18 18:33:27 2020 authpriv.info dropbear[5325]: Child connection from 192.168.1.2:37666
Tue Aug 18 18:33:40 2020 authpriv.notice dropbear[5325]: Password auth succeeded for 'root' from 192.168.1.2:37666

Wifi-Konfigurationsdatei ist leer ,kein wunder das da nix läuft ...
Und das ist ja auch das Problem, unter luci kann ich unter WLAN nur eine unverschlüsselt Verbindung machen . Und wenn ich dann versuche auf das WLAN zu verbinden. Kommt immer die Meldung Passwort falsch.

 

[RENErica]

Hallo Luelle,

bei der Easybox 904xDSL funktioniert die Konfiguration des WLANs über Luci nicht.

Kopiere bitte folgenden Abschnitt in einen Editor:


config wifi-device 'wl000'
option type 'ralink'
option channel '11'


config wifi-iface 'default_wl000'
option device 'wl000'
option network 'lan'
option mode 'ap'
option ssid 'Easybox'
option encryption 'psk2+aes'
option key 'WiFipassword'

config wifi-device 'wl010'
option type 'ralink'
option channel '11'


config wifi-iface 'default_wl010'
option device 'wl010'
option network 'lan'
option mode 'ap'
option ssid 'Easybox'
option encryption 'psk2+aes'
option key 'WiFipassword'


speichere die Datei als wireless auf dem Desktop oder in einem Verzeichnis.

Lade dir puTTy 0.74 herunter und installiere es.

https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html

Übertragen kannst Du die Datei mit dem Befehl:

pscp -scp wireless root@192.168.1.1:wireless

falls Du schon eine andere IP-Adresse eingestellt hast, verwende diese.
Logge dich in die Easybox mit ssh root@192.168.1.1 ein, mit :

cp wireless /etc/config/wireless

kannst du die Datei in das Konfigurationsverzeichnis kopieren.

Entweder änderst du die ssid und das Passwort vor dem übertragen auf die
Box oder auf der Box mit

vi /etc/config/wireless

Nun noch:

/etc/init.d/network restart

Viel Erfolg

P.S.: ZuZia hat glaub ich den mc auf der Box

 

[Luelle10]

Guten Morgen , danke wahrscheinlich genau das was ich gesucht habe... Aber zum x-mal das Image neugeflasht und komischerweise kann jetzt auf die Wireless Datei und siehe da ist schon alles konfiguriert musste nur das WLAN aktivieren und jetzt läuft es .. danke für die Hilfe ....