HD2400 Pro Crossfire fähig?

Dear Christian,

according to the compatibility chart, you can combine HD2400 XT card with a HD2400 XT as well as a HD2400 PRO witha an identical card.

This combination options chart can be found here -> http://ati.amd.com/technology/crossfire/tutorials.html

I would like also to draw your attention to the list of ATI CrossFire certified components

http://ati.amd.com/technology/crossfire/certified.html

Please also check the list of FAQ - > http://ati.amd.com/technology/crossfire/faq.html

Sincerely,

George V.

AMD Customer Support for ATI Products


http://ati.amd.com

Zum Vergrößern anklicken....

A. CrossFire Edition and compatible CrossFire ready cards are connected by an external cable. The cable is attached from the CrossFire ready card’s DVI connector to the CrossFire Edition high density input connector (DMS). The compositing engine combines the result of both cards to output a complete image.

Radeon X1950 Pro and X1650 XT cards use an all new, high-bandwidth internal CrossFire Interconnect for two way communication.

Certain CrossFire Ready cards do not require an external connector, just a compatible second card. CrossFire mode is then enabled via software and the cards communicate over the high speed PCI Express® bus on the motherboard.

Zum Vergrößern anklicken....

Greetings!



Thank you for contacting AMD Customer Care for ATI products.



Sorry if the answer was not clear.

The truth of the matter is, if your AIB Partner product (the Sapphire 2400 series) is not amongst the CF-certified cards on the webpage you were advised of, it means that the chances that tow of these cards should provide crossfire capability are not very big, or are a matter of test and see (this would be at your own risk).



Thank you for choosing AMD

AMD Customer Care for ATI Products
http://ati.amd.com/

Zum Vergrößern anklicken....