Knito
Commander
- Registriert
- Sep. 2010
- Beiträge
- 2.293
Moin,
vcore in HWINFO64 bei gesetztem Core Ratio (OC), alle anderen Eintellungen außer LLC identisch.
LLC 2 -> 1,34 V
LLC 4 -> 1,29 V
jeweils Prime95 16 Thread Blend, Ergebnis ist reproduzierbar, keine Stichprobe.
Sollte es nicht genau andersrum sein? Oder verstehe ich das falsch?
"CPU Load-line CalibrationLoad-line is defined by Intel® specification and affects CPU power voltage. The CPU working voltage decreases proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increases the CPU and VRM thermal conditions.Configuration options [Auto] [Level 1] - [Level 7] "
Default ohne OC: LLC 2
Default bei gesetztem Core Ratio: LLC 4
vcore in HWINFO64 bei gesetztem Core Ratio (OC), alle anderen Eintellungen außer LLC identisch.
LLC 2 -> 1,34 V
LLC 4 -> 1,29 V
jeweils Prime95 16 Thread Blend, Ergebnis ist reproduzierbar, keine Stichprobe.
Sollte es nicht genau andersrum sein? Oder verstehe ich das falsch?
"CPU Load-line CalibrationLoad-line is defined by Intel® specification and affects CPU power voltage. The CPU working voltage decreases proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increases the CPU and VRM thermal conditions.Configuration options [Auto] [Level 1] - [Level 7] "
Default ohne OC: LLC 2
Default bei gesetztem Core Ratio: LLC 4
Zuletzt bearbeitet: