du hast aber den 11.1 catalyst installiert oder ?
sorry dass mir das erst jetzt auffällt:
der Treiber unterstützt die Grafikkarte wunderbar, wie ich gelesen habe, das einzige, was streikt ist
aticonfig
mit der Meldung
"aticonfig: No supported adapters detected"
die Lösung ist also, dass du einfach deine xorg.conf sicherst und dir eine für die Grafikkarte anlegst, am Ende mal meine:
du musst nur pci:1:0:0
durch evtl. pci:5:0:0 oder was ähnliches ersetzen
z.B.
lspci | grep ATI
05:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series]
05:00.1 Audio device: ATI Technologies Inc Cypress HDMI Audio [Radeon HD 5800 Series]
dann nimmst du natürlich 5:0:0
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "record"
Load "dri"
Load "dri2"
Load "glx"
Load "GLcore"
Load "freetype"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
# Option "mtrr" "off"
# Option "KernelModuleParm" "maxlockedmem=64"
# Option "HWCursor" "on"
# Option "CapabilitiesEX" "0x00000000"
# Option "OpenGLOverlay" "off"
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
# Identifier "aticonfig-Device[0]-0"
# Driver "fglrx"
# Option "UseFastTLS" "2"
# Option "DRI" "true"
# Option "TexturedVideo" "On"
# Option "TexturedVideoSync" "On"
# Option "Textured2D" "on"
# Option "IgnoreABI" "on"
# Option "TexturedXRender" "on" # <-- hardlock
### Available Driver options are:-
# Option "DPI" "96 x 96"
Identifier "Card0"
Driver "fglrx"
# Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon 5850"
# Option "XAANoOffscreenPixmaps" "true"
# Option "PseudoColorVisuals" "off"
# Option "no_accel" "no"
# Option "no_dri" "no"
# Option "VideoOverlay" "on"
# Option "BackingStore" "on"
# Option "BlockSignalsOnLock" "on"
# Option "AddARGBGLXVisuals" "True"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
das einzige "Problem", das auftreten kann, ist dass ein "Watermark" am unteren Bildschirm-Eck eingeblendet wird "unsupported hardware" aber das lässt sich durch ersetzen einer Datei in /etc/ati/...
abschalten
Viel Glück schonmal
edit:
hier ein
Link zu pastebin, wenn es etwas schwierig ist, es vom Forum zu kopieren
die mit # vorangestellten Zeilen sind auskommentiert und werden nicht benötigt