Cisco VoIP-Tel an Elmeg T484 (VoIP)

dcz01 · 26. Juni 2013

Hey an alle,

ich habe folgendes Problem:

Ich habe eine Elmeg T484-Telefonanlage mit dem 4 DSP-VoIP-Modul, womit ich bereits perfekt über die VoIP-Software PhonerLite telefonieren kann.
Jetzt habe ich ein zusätzliches Cisco Unified IP Phone 6961 (CP-6961), welches ich bereits wunderbar mit der SIP-Firmware ausgestattet habe (per TFTP).
Jedoch will sich das Telefon mit der aktuellen Konfiguration nicht an der Anlage registrieren (selbe Anmeldedaten wie bei PhonerLite, wo es funktioniert)

Evtl habt ihr eine Lösung?

Hier ist meine Config (SEPxxxxxxxxxxxxx.cnf.xml):

Code:

<device>
   <deviceProtocol>SIP</deviceProtocol>
   <sshUserId></sshUserId>
   <sshPassword></sshPassword>
   <devicePool>
      <dateTimeSetting>
         <dateTemplate>D/M/Y</dateTemplate>
         <timeZone>W. Europe Standard/Daylight Time</timeZone>
         <ntps>
              <ntp>
                  <name>0.pool.ntp.org</name>
                  <ntpMode>Unicast</ntpMode>
              </ntp>
         </ntps>
      </dateTimeSetting>
      <callManagerGroup>
         <members>
            <member priority="0">
               <callManager>
                  <ports>
                     <ethernetPhonePort>2000</ethernetPhonePort>
                     <sipPort>10000</sipPort>
                     <securedSipPort>5061</securedSipPort>
                  </ports>
                  <processNodeName>192.168.1.250</processNodeName>
               </callManager>
            </member>
         </members>
      </callManagerGroup>
   </devicePool>
   <sipProfile>
      <sipProxies>
		<backupProxy>192.168.1.250</backupProxy>
        <backupProxyPort>10000</backupProxyPort>
        <emergencyProxy>192.168.1.250</emergencyProxy>
        <emergencyProxyPort>10000</emergencyProxyPort>
        <outboundProxy></outboundProxy>
        <outboundProxyPort></outboundProxyPort>
        <registerWithProxy>true</registerWithProxy>
      </sipProxies>
      <sipCallFeatures>
         <cnfJoinEnabled>true</cnfJoinEnabled>
         <callForwardURI>x-serviceuri-cfwdall</callForwardURI>
         <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
         <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
         <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
         <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
         <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
         <rfc2543Hold>false</rfc2543Hold>
         <callHoldRingback>2</callHoldRingback>
         <localCfwdEnable>true</localCfwdEnable>
         <semiAttendedTransfer>true</semiAttendedTransfer>
         <anonymousCallBlock>2</anonymousCallBlock>
         <callerIdBlocking>2</callerIdBlocking>
         <dndControl>0</dndControl>
         <remoteCcEnable>true</remoteCcEnable>
      </sipCallFeatures>
      <sipStack>
         <sipInviteRetx>6</sipInviteRetx>
         <sipRetx>10</sipRetx>
         <timerInviteExpires>180</timerInviteExpires>
         <timerRegisterExpires>3600</timerRegisterExpires>
         <timerRegisterDelta>5</timerRegisterDelta>
         <timerKeepAliveExpires>120</timerKeepAliveExpires>
         <timerSubscribeExpires>120</timerSubscribeExpires>
         <timerSubscribeDelta>5</timerSubscribeDelta>
         <timerT1>500</timerT1>
         <timerT2>4000</timerT2>
         <maxRedirects>70</maxRedirects>
         <remotePartyID>true</remotePartyID>
         <userInfo>None</userInfo>
      </sipStack>
      <autoAnswerTimer>1</autoAnswerTimer>
      <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
      <autoAnswerOverride>true</autoAnswerOverride>
      <transferOnhookEnabled>false</transferOnhookEnabled>
      <enableVad>false</enableVad>
      <preferredCodec>g711a</preferredCodec>
      <dtmfAvtPayload>101</dtmfAvtPayload>
      <dtmfDbLevel>3</dtmfDbLevel>
      <dtmfOutofBand>avt</dtmfOutofBand>
      <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
      <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
      <kpml>3</kpml>
	  <natEnabled>false</natEnabled>
      <natAddress></natAddress>
      <phoneLabel>78</phoneLabel>
      <stutterMsgWaiting>0</stutterMsgWaiting>
      <callStats>false</callStats>
      <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
      <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
      <startMediaPort>16378</startMediaPort>
      <stopMediaPort>32766</stopMediaPort>
      <sipLines>
         <line button="1">
            <featureID>9</featureID>
            <featureLabel>78</featureLabel>
            <proxy>192.168.1.250</proxy>
            <port>10000</port>
            <name>"Name"</name>
            <displayName>"Name"</displayName>
            <autoAnswer>
               <autoAnswerEnabled>2</autoAnswerEnabled>
            </autoAnswer>
            <callWaiting>3</callWaiting>
            <authName>78</authName>
            <authPassword>Service</authPassword>
            <sharedLine>false</sharedLine>
            <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
            <messagesNumber>3501</messagesNumber>
            <ringSettingIdle>4</ringSettingIdle>
            <ringSettingActive>5</ringSettingActive>
            <contact>78</contact>
            <forwardCallInfoDisplay>
               <callerName>true</callerName>
               <callerNumber>true</callerNumber>
               <redirectedNumber>false</redirectedNumber>
               <dialedNumber>true</dialedNumber>
            </forwardCallInfoDisplay>
	     </line>   
      </sipLines>
      <voipControlPort>10000</voipControlPort>
      <dscpForAudio>178</dscpForAudio>
      <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
      <dialTemplate></dialTemplate>
   </sipProfile>
   <commonProfile>
      <phonePassword/>
      <backgroundImageAccess>true</backgroundImageAccess>
      <callLogBlfEnabled>1</callLogBlfEnabled>
   </commonProfile>
   <loadInformation>SIP69xx.9-3-3-2</loadInformation>
   <vendorConfig>
      <disableSpeaker>false</disableSpeaker>
      <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
      <pcPort>0</pcPort>
      <settingsAccess>0</settingsAccess>
      <garp>0</garp>
      <voiceVlanAccess>0</voiceVlanAccess>
      <videoCapability>0</videoCapability>
      <autoSelectLineEnable>0</autoSelectLineEnable>
      <webAccess>0</webAccess>
	  <sshAccess>1</sshAccess>
      <spanToPCPort>1</spanToPCPort>
      <loggingDisplay>1</loggingDisplay>
      <loadServer/>
   </vendorConfig>
   <versionStamp>1143565489-a3cbf294-7526-4c29-8791-c4fce4ce4c37</versionStamp>
   <networkLocale></networkLocale>
   <networkLocaleInfo>
      <name></name>
      <version></version>
   </networkLocaleInfo>
   <deviceSecurityMode>1</deviceSecurityMode>
   <authenticationURL/>
   <directoryURL/>
   <idleURL/>
   <informationURL/>
   <messagesURL/>
   <proxyServerURL/>
   <servicesURL/>
   <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
   <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
   <dscpForCm2Dvce>96</dscpForCm2Dvce>
   <transportLayerProtocol>2</transportLayerProtocol>
   <capfAuthMode>0</capfAuthMode>
   <capfList>
      <capf>
         <phonePort>3804</phonePort>
      </capf>
   </capfList>
   <certHash/>
   <encrConfig>false</encrConfig>
</device>

Suche

Cisco VoIP-Tel an Elmeg T484 (VoIP)

dcz01

Gast

Ähnliche Themen