Erstes Board mit SIS746: ECS L7S7A

[McBain]

SPECIFICATION:
PROCESSORS

¡ 462 pin Socket A supports AMD K7 processors
— Full series of Athlon XP/ Athlon/ Duron processors.
Chipset
¡ SiS746 & SiS963 Chipset
— SiS963 MuTIOL Media I/O delivered data transfer rate up to 1GB/s
— Integrated USB 2.0 host controller in SiS963
— Integrated IEEE 1394A host controller in SiS963
— AGP v3.0 compliant with 8x transfer mode.
¡ LAN: 10/100Mbps Faster Ethernet (optional)
¡ LPC I/O – ITE8705F
¡ Sil3112A Serial ATA (optional)
¡ AC97 Audio Codec
— Compliant with AC97 2.2 specification

SYSTEM BIOS
¡ Award 2Mb Flash EEPROM
¡ Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
¡ Full support for ACPI revision 1.0 specification

MEMORY
¡ Three 184-pin DDR DIMM sockets to support
— Three 2.5V DDR SDRAMs (DDR266/333) or
— Two 2.5V DDR SDRAMs (DDR400)
¡ Maximum: 3GB (1GB only for DDR400, conditional)

I/O INTERFACE
¡ Supports Plug and Play function
¡ PS/2 keyboard and PS/2 mouse connectors
¡ One EPP/ECP mode parallel port
¡ Two 16550 high-speed serial I/O ports
¡ Four USB Ports:
— Dual USB Ports and an optional IEEE1394 connector
— Dual USB Ports and an optional LAN connector
¡ Audio Ports (Line-in, Line-out, Mic-in)
¡ Dual PCI IDE interfaces – support four IDE devices (PIO Mode 4, DMA Mode 2, Ultra DMA 66/100, 133 for SiS963)
¡ Two serial ATA connectors
¡ Support 360K~2.88M Byte, 3 Mode FDDs or LS120
¡ ATX Power Supply Connectors
¡ Ports, headers and others
— IR header (SIR)
— CD-in header (CDIN1 & CDIN2)
— Front Panel MIC/Line-Out Header
— One IEEE 1394 A header (optional)
— Extra USB Header (USB3) for two USB devices
— HDD LED, Reset Switch, Power Switch headers
— CPU, BAK, and CHS Fan headers

RTC & BATTERY
¡ SiS963 built-in 256 byte of CMOS SRAM
¡ With CMOS hardware clear jumper
EXPANSION SLOTS
¡ 5 PCI slots, 1 AGP slot (8X), 1 CNR slot
FORM FACTOR & LAYERS
¡ ATX (305mm*244mm), 4 Layers

------

Overclocking:

Alles per BIOS einstellbar:

-Vcore
-Mem Voltage
-Adjustments
-1Mhz steppings FSB Overclocking
-Multiplier Control