Cisco D801 Einwahlproblem

[Denys(Ryo)]

Hallo, wir haben ein Router beim Kunden im Einsatz und sind nun am Verzweifeln was diesem angeht. Wir versuchen uns hier mit eine ISDN Verbindung einzuwählen, was leider scheitert. Im Windows kommt eine nicht viel aussagende und unglaubwürdige Fehlermeldung ( Kennwörter sind 100% Richtig ) welche wie folgt lautet:

Fehler 691: Der Zugriff wurde verweigert, da der Benutzername bzw. das Kennwurt ungültig ist.

Aus diesem Grund poste ich anbei poste ich mal den ISDN DEBUG des Routers, währe nett wenn ich einen Anhaltspunkt kriegen könnte woran es bei mir scheitert:

adelholzener#show run
Building configuration...

Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname adelholzener
!
enable secret xxxxxxxxxxxxxxxxxxxx
enable password xxxxxxxxxxxxxxxxxxxx
!
username MAGic4 callback-dialstring xxxxxxxxxxxxxxxxxxxx password xxxxxxxxxxxxxxxxxxxx
username MAGic callback-dialstring xxxxxxxxxxxxxxxxxxxx password xxxxxxxxxxxxxxxxxxxx
username MAGic2 callback-dialstring xxxxxxxxxxxxxxxxxxxx password xxxxxxxxxxxxxxxxxxxx
username MAGic3 callback-dialstring xxxxxxxxxxxxxxxxxxxx password xxxxxxxxxxxxxxxxxxxx
username MAGic5 callback-dialstring xxxxxxxxxxxxxxxxxxxx password xxxxxxxxxxxxxxxxxxxx
!
no ip finger
isdn switch-type basic-net3
isdn voice-call-failure 0
!
!
!
interface Ethernet0
ip address 91.9.103.30 255.0.0.0
no ip directed-broadcast
no cdp enable
!
interface BRI0
ip address 10.0.4.1 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer callback-secure
dialer enable-timeout 4
dialer map ip 10.0.4.2 name MAGic class dial1 xxxxxxxxxxxxxxxxxxxx
dialer map ip 10.0.4.2 name MAGic3 class dial1 xxxxxxxxxxxxxxxxxxxx
dialer map ip 10.0.4.2 name MAGic4 class dial1 xxxxxxxxxxxxxxxxxxxx
dialer map ip 10.0.4.2 name MAGic2 class dial1 xxxxxxxxxxxxxxxxxxxx
dialer map ip 10.0.4.2 name MAGic4 class dial1 xxxxxxxxxxxxxxxxxxxx
dialer map ip 10.0.4.2 name MAGic class dial1 xxxxxxxxxxxxxxxxxxxx
dialer-group 1
isdn switch-type basic-net3
isdn caller xxxxxxxxxxxxxxxxxxxx
isdn caller xxxxxxxxxxxxxxxxxxxx
isdn caller xxxxxxxxxxxxxxxxxxxx
isdn caller xxxxxxxxxxxxxxxxxxxx
isdn caller xxxxxxxxxxxxxxxxxxxx
isdn caller xxxxxxxxxxxxxxxxxxxx
isdn caller xxxxxxxxxxxxxxxxxxxx
isdn caller xxxxxxxxxxxxxxxxxxxx
no cdp enable
ppp callback accept
ppp authentication chap
!
ip http server
ip classless
!
!
map-class dialer dial1
dialer callback-server username
dialer-list 1 protocol ip permit
no cdp run
!
line con 0
exec-timeout 0 0
password xxxxxxxxxxxxxxxxxxxx
transport input none
stopbits 1
line vty 0 4
password xxxxxxxxxxxxxxxxxxxx
login
!
end

adelholzener#
00:42:58: ISDN BR0: L1 is IF_ACTIVE
00:42:58: ISDN BR0: Incoming call id = 0x6, dsl 0
00:42:249108103168: ISDN BR0: TX -> SABMEp sapi = 0 tei = 77
00:42:58: ISDN BR0: RX <- UI sapi = 0 tei = 127 i = 0x08010805A1040288901801891E0282836C0F0183303030383934323732303639327004C13
73831
00:42:58: SETUP pd = 8 callref = 0x08
00:42:58: Sending Complete
00:42:58: Bearer Capability i = 0x8890
00:42:58: Channel ID i = 0x89
00:42:58: Progress Ind i = 0x8283 - Origination address is non-ISDN
00:42:58: Calling Party Number i = 0x0183, 'xxxxxxxxxxxxxxxxxxxx'
00:42:58: Called Party Number i = 0xC1, '781'
00:42:58: ISDN BR0: RX <- UAf sapi = 0 tei = 72
00:42:58: ISDN BR0: RX <- UAf sapi = 0 tei = 77
00:42:58: ISDN BR0: RX <- RRr sapi = 0 tei = 72 nr = 1
00:42:249109560448: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 77 changed to up
00:42:249108103168: ISDN BR0: Incoming call id = 0x7, dsl 0
00:42:249114344436: ISDN BR0: received HOST_INCOMING_CALL call_id 0x7
00:42:249108103168: ISDN BR0: HOST_INCOMING_CALL: voice_answer_data = FALSE
00:42:249108144128: ISDN BR0: Event: Received a DATA call from xxxxxxxxxxxxxxxxxxxx on B1 at 64 Kb/s
00:42:249108103851: ISDN BR0: RM returned call_type 0 resource type 0
00:42:249114328316: ISDN BR0: TX -> INFOc sapi = 0 tei = 77 ns = 0 nr = 0 i = 0x08018802
00:42:249108103168: CALL_PROC pd = 8 callref = 0x88
00:42:58: ISDN BR0: isdn_send_connect(): msg 4, call id 0x7, ces 1 bchan 0, call type DATA
00:42:58: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
00:42:58: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to xxxxxxxxxxxxxxxxxxxx
00:42:58: BR0:1 PPP: Treating connection as a callin
00:42:59: BR0:1 PPP: Phase is ESTABLISHING, Passive Open
00:42:59: BR0:1 LCP: State is Listen
00:42:59: ISDN BR0: RX <- RRr sapi = 0 tei = 72 nr = 2
00:42:59: ISDN BR0: RX <- INFOc sapi = 0 tei = 72 ns = 0 nr = 2 i = 0x0801080F
00:42:59: CONNECT_ACK pd = 8 callref = 0x08
00:42:59: ISDN BR0: RX <- RRr sapi = 0 tei = 77 nr = 1
00:42:59: ISDN BR0: RX <- INFOc sapi = 0 tei = 77 ns = 0 nr = 1 i = 0x0801085A080282D1
00:42:59: RELEASE_COMP pd = 8 callref = 0x08
00:42:59: Cause i = 0x82D1 - Invalid call reference value
00:42:253403070464: ISDN BR0: TX -> RRr sapi = 0 tei = 77 nr = 1
00:42:253403070464: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x7
00:42:253409311588: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
00:42:257698037759: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
00:42:253409311516: BR0:1 LCP: State is Closed
00:42:253409311476: BR0:1 PPP: Phase is DOWN
00:42:253403070464: CC: dsl 0 No CCB Src->HOST cid 0x7, ev 0x4 ces 1
00:42:257698037759: ISDN BR0: received HOST_QUERY_RESPONSE call_id 0x7
00:43:00: ISDN BR0: RX <- INFOc sapi = 0 tei = 72 ns = 1 nr = 2 i = 0x0801084508028090
00:43:00: DISCONNECT pd = 8 callref = 0x08
00:43:00: Cause i = 0x8090 - Normal call clearing
00:43:00: ISDN BR0: RX <- RRr sapi = 0 tei = 72 nr = 3
00:43:00: ISDN BR0: RX <- INFOc sapi = 0 tei = 72 ns = 2 nr = 3 i = 0x0801085A
00:43:00: RELEASE_COMP pd = 8 callref = 0x08
00:43:38654746624: ISDN BR0: TX -> RRp sapi = 0 tei = 77 nr = 1
00:43:09: ISDN BR0: RX <- RRf sapi = 0 tei = 77 nr = 1
00:43:10: ISDN BR0: RX <- RRf sapi = 0 tei = 72 nr = 3
00:43:81604419584: ISDN BR0: TX -> RRp sapi = 0 tei = 77 nr = 1
00:43:19: ISDN BR0: RX <- RRf sapi = 0 tei = 77 nr = 1
00:43:20: ISDN BR0: RX <- RRp sapi = 0 tei = 72 nr = 3
00:43:20: ISDN BR0: RX <- RRf sapi = 0 tei = 72 nr = 3
00:43:124554092544: ISDN BR0: TX -> RRp sapi = 0 tei = 77 nr = 1
00:43:29:


Press RETURN to get started!


00:00:18: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:19: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to up
00:00:21: %LINK-3-UPDOWN: Interface BRI0, changed state to up
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to down
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed state to down
00:00:23: %SYS-5-CONFIG_I: Configured from memory by console
00:00:23: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C800 Software (C800-Y6-MW), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 06-Dec-99 13:47 by phanguye
00:00:41: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
00:00:176093659136: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 79 changed to up
00:00:176093659136: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
00:00:53: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
00:00:53: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to xxxxxxxxxxxxxxxxxxxx
00:00:231928233984: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from xxxxxxxxxxxxxxxxxxxx , call lasted 1 seconds
00:00:231934474860: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down

 

[netzwerker]

Ich würde eher bei PPP suchen. debug ppp nego, debug ppp auth und debug ppp events

Mirko

 

[TheDuque]

Uhm hast du beim einwählenden PC die 10.er IP adr. vergeben die du in der config vergeben hast ??

sprich TCP/IP auf dem Dail-Up eingerichted ??

wenn ichs nid vergesse post ich morgen ne config für den schiss. mag nimmer umloggen. hoffentlich vergess ichs nid

 

[Denys(Ryo)]

Also die IP wurde schon richtig vergeben. Ich denke das liegt wie netzwerker schon gesagt hat im BRI0 Interface..... Ich probiere schon zu lange an diesem Gerät herum, irgendwann vergeht ein die Laune.

Wäre nett wenn du es nicht vergisst @ TheDuque

bd

 

[TheDuque]

Was bekommst du bei debug ppp callback (müsste callback sein)
und debug isdn q931

wieso hast du ne public IP auf eth0 ?

euer ISDN NT ist die nummern zuweisung korrekt ??

andere frage ein dail-out zu irgend nem 0915 Provider via ISDN funktioniert vom router aus ??
in all unseren config examples verwenden wir nen dhcp pool

peer default ip address pool dialer2-addr (example)

ip local pool dialer2-addr 192.168.1.230 192.168.1.250 (example)