linuxnutzer
Commander
- Registriert
- Dez. 2011
- Beiträge
- 2.458
ATA error count increased from 30 to 36
Kann das ein Kabelfehler sein oder geht die HD ein? Eben konnte ich nicht booten, dann ging es doch.
Kann das ein Kabelfehler sein oder geht die HD ein? Eben konnte ich nicht booten, dann ging es doch.
Code:
Subject: ALARM: ERRORS bei /dev/sda (sv) von 30 auf 36 erhöht
Date: Thu, 29 Jun 2017 11:55:06 +0200
User-Agent: s-nail v14.8.6
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-56-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA300
Serial Number: 43.....AS
LU WWN Device Id: 5 000039 ff.....32
Firmware Version: MX6OABB0
User Capacity: 3.000.592.982.016 bytes [3,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Jun 29 11:55:04 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (23943) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 399) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 139 139 054 - 72
3 Spin_Up_Time POS--- 142 142 024 - 417 (Average 392)
4 Start_Stop_Count -O--C- 100 100 000 - 3873
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 121 121 020 - 34
9 Power_On_Hours -O--C- 098 098 000 - 14114
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3873
192 Power-Off_Retract_Count -O--CK 097 097 000 - 3929
193 Load_Cycle_Count -O--C- 097 097 000 - 3929
194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 17/61)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 36 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 36 [3] occurred at disk power-on lifetime: 14114 hours (588 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 06 61 00 00 09 1e 9f af 09 00 Error: ICRC, ABRT at LBA = 0x091e9faf = 153001903
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 08 00 00 68 00 00 09 1e 9e 10 40 08 00:00:24.745 WRITE FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:24.745 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:24.744 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:24.743 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:24.743 SET FEATURES [Set transfer mode]
Error 35 [2] occurred at disk power-on lifetime: 14114 hours (588 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 07 c1 00 00 09 1e 96 4f 09 00 Error: ICRC, ABRT at LBA = 0x091e964f = 152999503
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 08 00 00 48 00 00 09 1e 96 10 40 08 00:00:24.259 WRITE FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:24.259 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:24.258 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:24.257 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:24.257 SET FEATURES [Set transfer mode]
Error 34 [1] occurred at disk power-on lifetime: 14114 hours (588 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 05 b0 00 00 09 1e a0 60 09 00 Error: ICRC, ABRT at LBA = 0x091ea060 = 153002080
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 08 00 00 d0 00 00 09 1e 9e 10 40 08 00:00:23.769 WRITE FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:23.769 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:23.768 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:23.767 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:23.767 SET FEATURES [Set transfer mode]
Error 33 [0] occurred at disk power-on lifetime: 14114 hours (588 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 06 e0 00 00 09 1e 97 30 09 00 Error: ICRC, ABRT at LBA = 0x091e9730 = 152999728
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 08 00 00 b0 00 00 09 1e 96 10 40 08 00:00:23.283 WRITE FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:23.282 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:23.282 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:23.281 IDENTIFY DEVICE
ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:23.281 SET FEATURES [Set transfer mode]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3607 -
# 2 Short offline Completed without error 00% 3601 -
# 3 Extended offline Completed without error 00% 6 -
# 4 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 24/34 Celsius
Lifetime Min/Max Temperature: 17/61 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (117)
Index Estimated Time Temperature Celsius
118 2017-06-29 09:48 42 ***********************
... ..( 66 skipped). .. ***********************
57 2017-06-29 10:55 42 ***********************
58 2017-06-29 10:56 43 ************************
59 2017-06-29 10:57 42 ***********************
... ..( 37 skipped). .. ***********************
97 2017-06-29 11:35 42 ***********************
98 2017-06-29 11:36 ? -
99 2017-06-29 11:37 25 ******
100 2017-06-29 11:38 26 *******
101 2017-06-29 11:39 26 *******
102 2017-06-29 11:40 27 ********
103 2017-06-29 11:41 28 *********
104 2017-06-29 11:42 28 *********
105 2017-06-29 11:43 28 *********
106 2017-06-29 11:44 29 **********
107 2017-06-29 11:45 29 **********
108 2017-06-29 11:46 30 ***********
109 2017-06-29 11:47 30 ***********
110 2017-06-29 11:48 31 ************
111 2017-06-29 11:49 31 ************
112 2017-06-29 11:50 32 *************
113 2017-06-29 11:51 32 *************
114 2017-06-29 11:52 33 **************
115 2017-06-29 11:53 33 **************
116 2017-06-29 11:54 33 **************
117 2017-06-29 11:55 34 ***************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 3873 --- Lifetime Power-On Resets
0x01 0x010 4 14114 --- Power-on Hours
0x01 0x018 6 83520348412 --- Logical Sectors Written
0x01 0x020 6 373678359 --- Number of Write Commands
0x01 0x028 6 141669137458 --- Logical Sectors Read
0x01 0x030 6 1085875588 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 14101 --- Spindle Motor Power-on Hours
0x03 0x010 4 14101 --- Head Flying Hours
0x03 0x018 4 3929 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 116 --- Read Recovery Attempts
0x03 0x030 4 6 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 30 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 34 --- Current Temperature
0x05 0x010 1 40 N-- Average Short Term Temperature
0x05 0x018 1 39 N-- Average Long Term Temperature
0x05 0x020 1 61 --- Highest Temperature
0x05 0x028 1 17 --- Lowest Temperature
0x05 0x030 1 55 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 47 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 10 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 40658 --- Number of Hardware Resets
0x06 0x010 4 11458 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 6 Command failed due to ICRC error
0x0002 2 6 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 6 R_ERR response for host-to-device data FIS
0x0005 2 1 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 1 R_ERR response for host-to-device non-data FIS
0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
0x000b 2 6 CRC errors within host-to-device FIS
0x000d 2 9 Non-CRC errors within host-to-device FIS
Zuletzt bearbeitet:
