Nero funzt net auf nForce2!?

[TheRealPredator]

Hi Leutz,
also ich hab ein Problem ich kann mit meinem Nero keine CD's mehr brennen seit ich auif das nForce Board Epox8RDA+ umgestiegen bin, komischerweise erkennt er sämtliche Laufwerke auch als SCSI Laufwerke. Folgende Fehlermeldung bekomme ich ausgespuckt:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29.01.2003 21:37:36
Nero Version: 5.5.10.15
Recorder: <PLEXTOR CD-R PX-W4012A>Version: 1.04 - HA 1 TA 1 - 5.5.10.15
Adapter driver: <nvidesm> HA 1
Drive buffer : 4096kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ELBY DVD-ROM> Version: 1.0 - HA 0 TA 0 - 5.5.10.15
Adapter driver: <ElbyVCD> HA 0
Bus Type : default (0) -> SCSI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: ?
DiskPeripheral : MAXTOR 6L040J2 A93. nvidesm Port 1 ID 0 DMA: ?
CdRomPeripheral : TOSHIBA DVD-ROM SD-M16121004 nvidesm Port 1 ID 0 DMA: ?
CdRomPeripheral : PLEXTOR CD-R PX-W4012A1.04 nvidesm Port 1 ID 1 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 311MB (319092kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

10.3.2003
CD-ROM (ISO)
20:10:09 #1 Text 0 File Isodoc.cpp, Line 7495
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:10:09 #2 Phase 72 File dlgbrnst.cpp, Line 1655
BURN-Proof activated

20:10:09 #3 Text 0 File Reader.cpp, Line 115
Reader running

20:10:09 #4 Text 0 File Writer.cpp, Line 123
Writer PLEXTOR CD-R PX-W4012A running

20:10:09 #5 ISO9660GEN -11 File geniso.cpp, Line 4546
First writeable address = 0 (0x00000000)

20:10:09 #6 Text 0 File Burncd.cpp, Line 3717
Turn on Track-At-Once, using CD-R/RW media

20:10:09 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 54383 (54383) = #54383/12:5.8
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

20:10:29 #8 Text 0 File DlgWaitCD.cpp, Line 211
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 54382 (12:07.07)

20:10:29 #9 Text 0 File DlgWaitCD.cpp, Line 216
Write in overburning mode: FALSE

20:10:29 #10 Text 0 File DlgWaitCD.cpp, Line 1630
Recorder: PLEXTOR CD-R PX-W4012A;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data: ?

20:10:29 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PLEXTOR CD-R PX-W4012A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 111683584

20:10:29 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

20:10:29 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 54383 (54383) = #54383/12:5.8
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 54381 blocks [PLEXTOR CD-R PX-W4012A]
--------------------------------------------------------------

20:10:29 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

20:10:29 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

20:10:29 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 40x (6.000 KB/s)

20:10:29 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

20:10:29 #18 Text 0 File Mmc.cpp, Line 17499
Set BUFE: BURN-Proof -> ON

20:10:35 #19 SCSI -500 File Cdrdrv.cpp, Line 1407
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03110000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

20:10:35 #20 CDR -500 File Writer.cpp, Line 331
SCSI/IDE Command aborted

20:10:35 #21 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

20:10:44 #22 SCSI -500 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

20:11:08 #23 CDR -500 File WriterStatus.cpp, Line 191
SCSI/IDE Command aborted

20:11:08 #24 TRANSFER -18 File WriterStatus.cpp, Line 191
Could not perform EndTrack

20:11:08 #25 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

20:11:08 #26 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

20:11:08 #27 Text 0 File Mmc.cpp, Line 12534
<PLEXTOR CD-R PX-W4012A> start Close Session

20:11:08 #28 SCSI -1026 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04

20:11:08 #29 MMC -1026 File WriterStatus.cpp, Line 233
Current program area empty

20:11:08 #30 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

20:11:08 #31 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation

20:11:08 #32 Text 0 File Mmc.cpp, Line 12534
<PLEXTOR CD-R PX-W4012A> start Close Session

20:11:08 #33 SCSI -1026 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x04

20:11:08 #34 MMC -1026 File WriterStatus.cpp, Line 233
Current program area empty

20:11:08 #35 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

20:11:08 #36 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 40x (6.000 KB/s)

20:11:08 #37 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 13.11.2002 15:10:00 (Adapter driver for rec)
File 'Drivers\ElbyVCD.sys': Ver=4, 2, 0, 0, size=22016 bytes, created 28.11.2002 11:43:49 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

So was hat das nun zu bedeuten?
MFG TRP

 

[SiNNeR]

-windoof

eigendlich wenn man ein neues board kauft ,sollte man auch alles neu drauf machen . also Windows , mainboard treiber usw .... dann muss normale weise alles funzen

peace&greetz

 

[Becks0815]

Das gleiche Problem hatte ich mit dem ASUS A7N8x auch. Brenner hat mit keinem Programm mehr gefunzt (Benq 48x). Einen Tag geärgert - dann P4 und das ASUS P4G8x gekauft - und siehe da alles war gut. War die letzten 4 Jahre überzeugter AMDler - P4 rulez!!!!

 

[Sensei21]

@TheRealPredator

Du hast doch sicherlich den NForce2-Treiber von Nvidia installiert oder?
(Epox bietet ja nur den Treiber von Nvidia zum Download)

installier den Nforce2-Treiber nochmal neu:
wenn jetzt der Kasten mit der Info zum IDE-Treiber erscheint, klicke zunächst auf weiter...

beim folgenden (Popup-)Fenster beantwortest du die Frage, ob der Treiber installiert werden soll mit Nein

--> keine Angst

die Installation geht weiter, jetzt dürfte es keine Probleme mehr geben

Falls das dir nicht weiterhilft, installiere dein Windows, wie CrYpToCrow gesagt hat, nochmal neu

 

[TheRealPredator]

Jo thx, hat gefunzt!

 

[Slave Zero]

Du hast bestimmt XP drauf. Da kommt glaub ich irgendeine Frage bestimmte IDE-Treiber von NVidia zu installieren. Mußt du nein machen, dann geht auch Nero. Sind irgendwelche speziellen Busmastertreiber die du auf gar keinen Fall verwenden solltest, dann hast du auch keine SCSI-Laufwerke. Habs selber getestet- Nero geht dann wirklich nicht.