TeamViewer Motive 3

SSD als Sysplatte...

Zuletzt bearbeitet:
Ja aber die zählt zu den 10%... steht auch in meinem Link...
Die Platte ist in den tests fast immer den SLC (ausser der Intel Extreme SSD) SSDs überlegen!
Wenn das mit den Controllern immer noch so wäre, wäre meine Frage hier ja nicht gestellt worden ^^
zumindestens nicht von mir ^^
 
Hmm die Unterschiede sieht man ja:

- Schreibrate: Intel etwas langsamer als Mtron
- Leserate: Intel mehr als doppelt so schnell
- Haltbarkeit: Die Mtron raucht höchstwahrscheinlich nicht so schnell ab...
- Zugriffszeit: Intel beim schreiben deutlich vorn, Mtron auf Augenhöhe mit einer normalen HDD... (*Test*)

Musst du halt wissen was dir wichtiger ist, aber ich würde wegen dem Gesamtbild zur Intel greifen ;)
 
Hab mir die Mtron gekauft...
Die Intel hat leider einen "Fehler"...
Und zwar bricht die Intel unberechenbar bei manchen Schreibvorgängen ein und
hat dann Schreibraten von ~20MB...
Die Mtron ist in beide Richtungen sehr stabil und zuverlässig...

Wär dieser Fehler nicht vorhanden würde ich auf jedenfall zur Intel greifen...
Den Fehler verursacht im übrigen der Controller, der manchmal nicht hinterher kommt
gleichmäßig die Daten zu verteilen... (Um der Abnutzung der MLC Bausteine entgegen zu kommen)

Naja egal, trotzdem danke für deine Mühe :)
 
@Magguz

Da meine MTron SSD auch auf dem Weg ist, frage ich dich mal, ob du etwas bestimmtes eingestellt hast. Oder einfach SSD ran und OS drauf installiert?
 
Was meinst du mit dem Link?

Danke schon mal für den Hinweis mit AHCI. Werde ich mal schon deaktivieren.
 
Ich würde auf jedenfall die Mtron nehmen. weil hast du dich schon mal gefragt warum Mtron und Memoright keine MLC SSDs im programm haben ?

Ich hab grad mal den life time check laufen lassen.

@snoopy. Ich hab meine 7500pro seit ~7 Monaten in betrieb. Und hab nahe zu 40mio total erased counts. Und bin noch bei 99%. Ich hab aber in der zeit sehr oft formatiert bzw. Vista neu installiert.

Ich ziehe daher den Acard 9010/Hyperdrive5 auf jeden fall vor den Intel SSDs vor.
 

Anhänge

  • Aufzeichnen.JPG
    Aufzeichnen.JPG
    51,1 KB · Aufrufe: 477
Zuletzt bearbeitet:
@Snoopy69

Das ist das Update Tool für die Firmware der SSD, wenn ich mich jetzt nicht total verguckt habe. Oder?
 
Nach dem was Mtron schreibt müssen wir uns um die Lebenserwartung keine sorgen machen :D

What is the Write Endurance of the product?

For the life of a single flash memory, at least 100,000 times of the write/erase cycles are guaranteed. However, we have a proprietary technology (Wear-Leveling Algorithm) that connects flash memories in parallel and distributes data evenly among them. For example, for a 32 GB product, if 50 GB of data are written and erased every day, it is said that more than 140 years of the product life is guaranteed. That is, the product can be used semi-permanently.

According to Microsoft’s survey, the average amount of data written and erased daily by a regular Windows XP user is just 128 MB.

A. Unlimited Read

B. Write is affected by the data pattern and wear-leveling overhead.

C. Assumption

1. Sequential write

2. Usage: 100GB/day

3. Model: MSP-7035 32GB SSD

4. Workload: 100GB *1.1rate
(Constant for Wear-Leveling simulation from our R&D)

32GB*100,000/(100GB*1.1)

3,200,000/110= 29,090.90 à 29,090.90/365(day) = 79.70(1year)

Therefore, there is possibility to use SSD about 79 years.


D. The data retention period os 10 years. [10 years @ 25℃: The period guaranteed by a NAND manufacturer]


Unterschied MOBI und PRO

What are the differences between MOBI and PRO?

Mtron SSD is available in two product series. The MOBI series is designed with a focus in affordable price and low power consumption to meet the needs of mobile computing system. The PRO series is designed by considering durability and performance to satisfy the needs of server and enterprise computing systems. A product warranty is not available when MOBI is used for server and storage systems. The MOBI 1000 series utilizes MLC Flash Memories to improve capacity and price advantage by reducing write performance and product life.
 
Zuletzt bearbeitet:
@Snoopy69

Wie, und was noch?

Die Anleitung wie man flasht. Dann noch ein Boot Image...

Worauf willst du hinaus?
 
Les doch bitte was da alles steht. Er hat von einem tool gesprochen von dem ich einen screen geposted hab.
 
Mensch, was ist so schwer daran mich kurz aufzuklären anstatt immer zu schreiben "Guck doch nochmal genauer usw.?

Also den Sreenshot von dem Tool habe ich nun gesehen. Danke dafür.
Aber auf die Frage, ob man etwas bestimmtes einstellen sollte einfach mit einem Link bzw. Tool zu kommen finde ich nicht unbedingt klasse.

Was kann ich mit dem Tool machen bzw. was sollte ich machen?
 
Hi Snoopy69,

du hast zwar das Tool erwähnt. Aber nicht, was man damit machen kann/soll.
 
Zurück
Oben