DDWRT verwirft die Einstellung nach dem Neustart

folkert2222

Cadet 4th Year
Registriert
Aug. 2009
Beiträge
76
Hey Leute :)

Ich hab auf meinen TP-Link TL-WR941ND DD-WRT aufgespielt.
Jedoch wenn ich meine Steckerleiste ausschalte wo der angeschlossen ist, verwirft er die Einstellungen (IP,Client-Bridge...etc.).
Gibts da irgendeine Lösung? Irgendein Häkchen das ich vergessen habe zu setzten?

mfg folkert2222
 
Geh mal per Telnet auf den Router und gebe mal den Befehl "nvram show" ein.
Dort sollte dann deine Konfig liegen wenn alles richtig läuft.

NVRAM steht für non volatile random access memory (nichtflüchtiger Speicher) und ist sozusagen der Konfigurationsspeicher des WRT
 
wo finde ich unter Win7 Telnet?
Gefunden, wie komme ich nun auf den TP-Link (192.168.1.200)
 
Musst du über die Systemsteuerung nachinstallieren.
Systemsteuerung\Programme\Programme und Funktionen => Dann links Windows Funktionen aktivieren oder deaktivieren

Da dann "Telnet-Client"
 
overclocking=
pptp_extraoptions=
hopseq=0
oet2_id=1
eth1_bridged=1
wl0_wme_txp_vo=7 3 4 2 0
pptp_reorder=1
wl0_radius_override=1
ath4_radius_port=1812
dhcp_domain=wan
port4vlans=0
fon_userlist=
sputnik_done=0
vlans=0
samba_mount=0
wl_wep_last=
ath0.2_ssid=
wl_wme_ap_vo=3 7 1 3264 1504 off
wan_gateway_buf=0.0.0.0
ath5_8021xtype=peap
wan_dial=0
warn_connlimit=500
oet6_shaper=0
resetbutton_enable=1
block_cookie=0
wan_vdsl=0
wan_iface=
chilli_dns1=0.0.0.0
rc_firewall=
wl_frameburst=off
ezc_enable=1
ath0_chanshift=0
wd_maclist=
NC_enable=0
wl0_nmode_protection=auto
ath0.3_ipaddr=0.0.0.0
is_modified=1
eth5_bridged=1
ath3_lazywds=0
upnp_wan_proto=
smtp_redirect_destination=0.0.0.0
svqos_port3prio=10
dhcp_num=50
filter_web_url1=
wan_ipaddr=0.0.0.0
oet3_bridged=1
filter_web_url2=
reconnect_hours=0
filter_web_url3=
et0macaddr_safe=00:27:19:DA:AD:D0
af_country=
oet2_ip=1.2.3.4
wl0_rts=2347
ath1_channelbw=20
filter_web_url4=
ath0_pollingmode=0
tcp_congestion_control=vegas
af_ssid_name=AnchorFree WiFi
wd_sslport=443
ospfd_copt=0
zebra_conf=
filter_web_url5=
fon_enable=0
port2vlans=0
ath1_wpa_gtk_rekey=3600
wl_ifname=
filter_web_url6=
wan_wins=0.0.0.0
oet9_comp=0
ipv6_enable=0
ntp_mode=auto
ath5_radius_port=1812
wl_wep=disabled
http_enable=1
filter_web_url7=
wl0_radauth=0
l2tp_pass=1
filter_web_url8=
oet8_en=0
eth9_bridged=1
sputnik_mode=standard
svqos_ips=
ddns_dyndnstype=
ath1_channel=0
pppoe_username=
filter_web_url9=
os_version=4.150.10.5
oet7_bridged=1
l2tp_use_dhcp=0
ath3_wpa_psk=
wl_gmode_protection=auto
ath5_closed=0
eth4_ipaddr=0.0.0.0
sshd_rsa_host_key=
mac_clone_enable=0
wl0_sta_retry_time=5
ppp_get_srv=
ath0_regdomain=GERMANY
oet1_id=1
wl_frag=2346
ath4_mode=ap
l2tp_req_chap=yes
wan_mtu=1500
wl_wep_gen=
eth1_netmask=0.0.0.0
ath4_wpa_gtk_rekey=3600
filter_macmode=deny
oet1_mssfix=0
wd_httpdname=WiFiDog
svqos_port1prio=10
ppp_compression=0
console_loglevel=7
NC_LoginTimeout=86400
port0vlans=1
sshd_wanport=22
dnsmasq_options=
time_zone=+01
oet7_comp=0
reconnect_minutes=0
ath5_akm=disabled
wan_get_domain=
af_state=
ttraff_enable=1
oet7_mssfix=0
l2tp_req_auth=yes
ath0.3_bridged=1
wan_ifname=
eth5_netmask=0.0.0.0
wl_wme_sta_be=15 1023 3 0 0 off
sshd_authorized_keys=
radvd_enable=0
ath5_xr=0
upnp_max_age=180
squid_proxy_server_port=3128
oet3_netmask=255.255.255.0
oet1_ip=1.2.3.4
hotss_customuam=
wl_radioids=
gozila_action=0
af_ssid=0
wl0_dfs_postism=60
ath2_mode=ap
wan_hostname=
wl_corerev=
af_address=
sv_restore_defaults=0
zebra_enable=1
info_passwd=0
DD_BOARD=TP-Link TL-WR941ND v2/v3
svqos_port3bw=FULL
oet10_comp=0
oet7_en=0
wl_wme_sta_bk=15 1023 7 0 0 off
manual_boot_nv=0
ath3_radius_key=
wl0_bcn=100
ath4_channelbw=20
ath0_wds5_enable=0
pptpd_auth=
ath0_relayd_gw_ipaddr=0.0.0.0
radio0_on_time=111111111111111111111111
macupd_interval=10
block_multicast=1
wl_afterburner=off
wl0_hwaddr=00:27:19:DA:AD:D0
ppp_static=0
filter_tod1=
dtag_vlan8=0
oet5_comp=0
eth9_netmask=0.0.0.0
log_rejected=0
dyn_default=0
filter_tod2=
oet7_netmask=255.255.255.0
filter_tod3=
oet1_shaper=0
filter_tod4=
ezc_version=2
oet9_rem=192.168.90.1
dnsmasq_no_dns_rebind=1
ddns_passwd_buf=
wk_mode=gateway
wl0_gmode_protection=auto
filter_tod5=
rc_shutdown=
ath0_8021xtype=peap
ath2_radius_ipaddr=
filter_tod6=
ath0_preamble=0
NC_GatewayMode=Open
ath3_akm=disabled
filter_tod7=
wl0_radmacpassword=0
wl_rts=2347
ath0_mode=wet
ath0_bridged=1
filter_tod8=
oet7_shaper=0
filter_tod9=
vlan0hwname=et0
wl_ap_isolate=0
lan_wins=
wd_path=/wifidog
dhcp_dnsmasq=0
NC_IdleTimeout=0
ip_conntrack_udp_timeouts=120
dhcpd_options=
wl_mac_list=
lan_hwnames=
dhcpd_usejffs=0
static_leases=
wl_wme_no_ack=off
wds_watchdog_enable=0
pppoe_demand=0
wd_auth=0
local_dns=0
ath1_auth_mode=disabled
ath4_xr=0
oet3_comp=0
ath5_radius_ipaddr=
ath0.3_netmask=0.0.0.0
filter_dport_grp10=
ath0_nat=1
wl0_wme_ap_be=15 63 3 0 0 off
ddns_username_buf=
ath0_maxrate=0
ath0_outdoor=0
wd_enable=0
wl0_nmcsidx=-1
wl0_lazy_wds=
ath0_closed=0
refresh_time=3
oet6_en=0
pptp_encrypt=0
oet10_en=0
NC_ForcedRedirect=0
ddns_wan_ip=1
oet7_rem=192.168.90.1
wl0_wme_ap_bk=15 1023 7 0 0 off
schedule_hour_time=1
dr_setting=0
upnp_enable=0
ath0_regulatory=1
wl_wme_txp_be=7 3 4 2 0
hs_redirect=
http_redirect_destination=0.0.0.0
eth5_ipaddr=0.0.0.0
ath1_akm=disabled
dhcpc_vendorclass=
wol_hostname=
pptpd_lip=
ath0_ssid=SIEMENS-6EFFE3
filter_rule10=
eth2_bridged=1
forwardspec_entries=0
rflow_if=br0
wl_dfs_preism=60
ath0_lazywds=0
oet1_comp=0
ppp_mlppp=0
wl_wme_txp_bk=7 3 4 2 0
NC_AllowedWebHosts=
def_whwaddr=00:00:00:00:00:00
ath2_radio=1
ath0_ap_isolate=0
oet2_mssfix=0
dhcpc_requestip=
status_auth=1
autofw_port0=
boardnum=0x0
warn_enabled=0
language=english
ath3_8021xtype=peap
ath0_netmask=0.0.0.0
def_hwaddr=00:00:00:00:00:00
oet8_mssfix=0
wl_bcn=100
ath0_scanlist=default
hotss_operatorid=
macupd_enable=0
wl_wep_buf=
wl_reg_mode=off
ath3_xr=0
oet10_mssfix=0
eth6_bridged=1
wd_username=
mmc_enable0=0
oet4_bridged=1
rflow_ip=0.0.0.0
limit_telnet=0
ath0_wpa_psk=
upnp_config=1
filter_dport_grp1=
oet5_rem=192.168.90.1
oet1_fragment=0
pptpd_client_mru=1450
rc_custom=
filter_dport_grp2=
size: 17750 bytes (47786 left)
root@DD-WRT:~#
Ergänzung ()

Kan damit jemand was anfangen?
Ergänzung ()

Weiß jemand ne Lösung? :O
 
Lösche mal den nvram und starte den Router mal durch.

Commands:
erase nvram
reboot

So sollte das neu angelegt werden.
Teste das am besten mal indem du einen WPA-key vergibst - der steht dann so offen im nvram - sprich für dich einfach zu erkennen ob das nun gespeichert wurde oder nicht.

Wurden die Einstellungen eigentlich auch gelöscht wenn du den Router einfach mal per Telnet durchgestartet hast ?!
 
Zuletzt bearbeitet:
Das "erase nvram" löscht ja gerade die ganzen Einstellungen ...
Ging mir darum die nvram zu löschen und durch den reboot neu anlegen zu lassen.

Hast du jetzt mal was verändert also zum bsp WPA key vergeben dann auf speichern.

Schau dann mit dem "nvram show" rein ob der Key drin steht - wenn ja dann zieh mal den Stecker.
 
Ich hab den TP-Link nur als "Empfänger" für das Wlan also bringt ein schlüssel da nicht viel.
 
Ist ja nur ein Bsp - nehm halt irgendwas was du direkt beim ausgeben des nvram sehen kannst.
 
den "Sender" kann man ja auslesen (Siemens)
Ergänzung ()

Gibts Lösungsverschläge?
 
Zurück
Oben