Dell 5290 2in1 läuft Webcam Rückseite unter Linux Mint 22.2 cinamone?

Uridium · 9. Januar 2026

Wähle mal in OBS als Quelle unten 'V4L2'. Dann sollten da mehrere Videogeräte auftauchen. Die kannst Du mal durchtesten. Ein vernünftiges Bild wird dabei wahrscheinlich nicht raus kommen, aber die sollten grundsätzlich in OBS vorhanden sein.

4nudels · 9. Januar 2026

ist 4 mal vorhande scho ngetest ale nur schwarzes bidl udn dan schleist obs nach paar sekuden

Uridium · 9. Januar 2026

Linux Mint 22.3 hat Kernel 6.14. Bis 6.18 sind evtl. zwei relevante Commits hinzugekommen (dies und das).
Schau mal im 'Update Manager' ob Du evtl. auf einen höheren Kernel updaten kannst.

4nudels · 9. Januar 2026

bin noch auf lm 22.2 2.3 ist noch beta

Ergänzung (9. Januar 2026)

und ob kernel 6.8 oder 6.14 nehem auf ergebnis leida kan unterschdie afast ales mit biedne kernel getestet

Uridium · 9. Januar 2026

Poste mal das:

$ sudo dmesg |grep -C5 -i udmabuf

4nudels · 9. Januar 2026

Code:

nudels@nudel-5290-2in1:~$ sudo dmesg |grep -C5 -i udmabuf
[sudo] Passwort für nudels:               
nudels@nudel-5290-2in1:~$ ^C
  das kommt nix  was nun ?

Uridium · 9. Januar 2026

Das ist in dem obigen Fall gut, wenn da nichts kommt.

Und das:

Code:

$ LIBCAMERA_LOG_LEVELS=*:DEBUG cam -l

4nudels · 9. Januar 2026

Code:

nudels@nudel-5290-2in1:~$ LIBCAMERA_LOG_LEVELS=*:DEBUG cam -l
[1:04:12.593427374] [33756] DEBUG IPAModule ipa_module.cpp:333 ipa_ipu3.so: IPA module /usr/lib/x86_64-linux-gnu/libcamera/ipa/ipa_ipu3.so is signed
[1:04:12.593527849] [33756] DEBUG IPAManager ipa_manager.cpp:239 Loaded IPA module '/usr/lib/x86_64-linux-gnu/libcamera/ipa/ipa_ipu3.so'
[1:04:12.593612056] [33756] DEBUG IPAModule ipa_module.cpp:333 ipa_vimc.so: IPA module /usr/lib/x86_64-linux-gnu/libcamera/ipa/ipa_vimc.so is signed
[1:04:12.593654301] [33756] DEBUG IPAManager ipa_manager.cpp:239 Loaded IPA module '/usr/lib/x86_64-linux-gnu/libcamera/ipa/ipa_vimc.so'
[1:04:12.593688771] [33756]  INFO Camera camera_manager.cpp:340 libcamera v0.6.0+68-c63f2c72
[1:04:12.593924682] [33757] DEBUG Camera camera_manager.cpp:74 Starting camera manager
[1:04:12.602154378] [33757] DEBUG DeviceEnumerator device_enumerator.cpp:267 New media device "ipu3-imgu" created from /dev/media1
[1:04:12.602249720] [33757] DEBUG DeviceEnumerator device_enumerator_udev.cpp:111 Defer media device /dev/media1 due to 12 missing dependencies
[1:04:12.604610358] [33757] DEBUG DeviceEnumerator device_enumerator_udev.cpp:346 All dependencies for media device /dev/media1 found
[1:04:12.604665318] [33757] DEBUG DeviceEnumerator device_enumerator.cpp:295 Added device /dev/media1: ipu3-imgu
[1:04:12.604864620] [33757] DEBUG DeviceEnumerator device_enumerator.cpp:267 New media device "ipu3-cio2" created from /dev/media0
[1:04:12.604899080] [33757] DEBUG DeviceEnumerator device_enumerator_udev.cpp:111 Defer media device /dev/media0 due to 8 missing dependencies
[1:04:12.606228645] [33757] DEBUG DeviceEnumerator device_enumerator_udev.cpp:346 All dependencies for media device /dev/media0 found
[1:04:12.606242629] [33757] DEBUG DeviceEnumerator device_enumerator.cpp:295 Added device /dev/media0: ipu3-cio2
[1:04:12.606472760] [33757] DEBUG Camera camera_manager.cpp:143 Found registered pipeline handler 'uvcvideo'
[1:04:12.606518708] [33757] DEBUG Camera camera_manager.cpp:143 Found registered pipeline handler 'vimc'
[1:04:12.606528562] [33757] DEBUG Camera camera_manager.cpp:143 Found registered pipeline handler 'ipu3'
[1:04:12.606536590] [33757] DEBUG DeviceEnumerator device_enumerator.cpp:355 Successful match for media device "ipu3-cio2"
[1:04:12.606547938] [33757] DEBUG DeviceEnumerator device_enumerator.cpp:355 Successful match for media device "ipu3-imgu"
[1:04:12.606563354] [33757] DEBUG MediaDevice media_device.cpp:854 /dev/media1[ipu3-imgu]: 'ipu3-imgu 0'[3] -> 'ipu3-imgu 0 viewfinder'[0]: 0
[1:04:12.606570609] [33757] DEBUG MediaDevice media_device.cpp:854 /dev/media1[ipu3-imgu]: 'ipu3-imgu 0'[4] -> 'ipu3-imgu 0 3a stat'[0]: 0
[1:04:12.606575459] [33757] DEBUG MediaDevice media_device.cpp:854 /dev/media1[ipu3-imgu]: 'ipu3-imgu 0 input'[0] -> 'ipu3-imgu 0'[0]: 0
[1:04:12.606580475] [33757] DEBUG MediaDevice media_device.cpp:854 /dev/media1[ipu3-imgu]: 'ipu3-imgu 0 parameters'[0] -> 'ipu3-imgu 0'[1]: 0
[1:04:12.606585837] [33757] DEBUG MediaDevice media_device.cpp:854 /dev/media1[ipu3-imgu]: 'ipu3-imgu 1'[3] -> 'ipu3-imgu 1 viewfinder'[0]: 0
[1:04:12.606590515] [33757] DEBUG MediaDevice media_device.cpp:854 /dev/media1[ipu3-imgu]: 'ipu3-imgu 1'[4] -> 'ipu3-imgu 1 3a stat'[0]: 0
[1:04:12.606595125] [33757] DEBUG MediaDevice media_device.cpp:854 /dev/media1[ipu3-imgu]: 'ipu3-imgu 1 input'[0] -> 'ipu3-imgu 1'[0]: 0
[1:04:12.606599655] [33757] DEBUG MediaDevice media_device.cpp:854 /dev/media1[ipu3-imgu]: 'ipu3-imgu 1 parameters'[0] -> 'ipu3-imgu 1'[1]: 0
[1:04:12.606643063] [33757] DEBUG V4L2 v4l2_device.cpp:742 'ipu3-imgu 0': Control: IPU3 Pipe Mode (0x009819c1)
[1:04:12.606689631] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video4[13:out]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606717055] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video6[14:cap]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606732395] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video7[15:cap]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606745251] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video5[16:out]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606759729] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video8[17:cap]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606775037] [33757] DEBUG V4L2 v4l2_device.cpp:742 'ipu3-imgu 1': Control: IPU3 Pipe Mode (0x009819c1)
[1:04:12.606791672] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video9[19:out]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606809173] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video11[20:cap]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606823514] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video12[21:cap]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606836380] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video10[22:out]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
[1:04:12.606849432] [33757] DEBUG V4L2 v4l2_videodevice.cpp:633 /dev/video13[23:cap]: Opened device PCI:0000:00:05.0: ipu3-imgu: ipu3-imgu
Available cameras:
nudels@nudel-5290-2in1:~$

Ergänzung (9. Januar 2026)

danke für alles bisher

Uridium · 10. Januar 2026

Das Eigenartige ist, dass nirgendwo Fehlermeldungen sind. Alles sieht richtig aus. Außer, dass am Ende keine Kamera angeboten wird.

Probiere mal das Programm cheese, falls es das in Mint gibt.

Poste mal:

$ uname -a
$ sudo dmesg |grep -iE -C5 "int34|acpi"

Du hast am Anfang Kernel 6.8 gehabt. Der ist schon recht alt. Standardkernel für Mint 22.2 sollte 6.14 sein. Nach Möglichkeit wechsle wieder dahin zurück.

Ich fasse mal zusammen:
Du hast zwei Kameras ov5670 (int3472, int3479) und ov8858 (int3477) laut diesem ipu dump. Die erste wird erkannt, aber nur unvollständig unterstützt.

[ 3.838520] int3472-tps68470 i2c-INT3472:05: error -ENODEV: No board-data found for this model

Die anderen werden gar nicht erst erkannt oder verarbeitet (je nachdem, was 'dmesg' oben ausspuckt).

Ich frage morgen mal jemanden, der sich damit auskennt, ob man da was machen kann.

4nudels · 10. Januar 2026

Ah mit chess das selbe

4nudels · 10. Januar 2026

danke und kan dan leigen danach anleitung gefudne die statt sudo sudo i verwdndet das des unterscheide macht dan entstaliere ev neu

Uridium · 10. Januar 2026

'sudo -i' schaltet um in eine permanente root Umgebung, so dass man nicht vor jeden Befehl 'sudo' schreiben muss, falls man mehrere eingeben muss. Auf keinen Fall sollte man in dieser Umgebung normal arbeiten. Das hat mit dem Problem der Kameras aber nichts zu tun.

Poste mal:

$ media-ctl -d0 -p
$ media-ctl -d1 -p

4nudels · 10. Januar 2026

Code:

nudels@nudel-5290-2in1:~$  media-ctl -d0 -p
Media controller API version 6.8.12

Media device information
------------------------
driver          ipu3-cio2
model           Intel IPU3 CIO2
serial         
bus info        PCI:0000:00:14.3
hw revision     0x0
driver version  6.8.12

Device topology
- entity 1: ipu3-csi2 0 (2 pads, 1 link, 0 routes)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev0
    pad0: Sink
        [stream:0 fmt:SGRBG10_1X10/1936x1096 field:none]
    pad1: Source
        [stream:0 fmt:SGRBG10_1X10/1936x1096 field:none]
        -> "ipu3-cio2 0":0 [ENABLED,IMMUTABLE]

- entity 4: ipu3-cio2 0 (1 pad, 1 link)
            type Node subtype V4L flags 0
            device node name /dev/video0
    pad0: Sink
        <- "ipu3-csi2 0":1 [ENABLED,IMMUTABLE]

- entity 10: ipu3-csi2 1 (2 pads, 1 link, 0 routes)
             type V4L2 subdev subtype Unknown flags 0
             device node name /dev/v4l-subdev1
    pad0: Sink
        [stream:0 fmt:SGRBG10_1X10/1936x1096 field:none]
    pad1: Source
        [stream:0 fmt:SGRBG10_1X10/1936x1096 field:none]
        -> "ipu3-cio2 1":0 [ENABLED,IMMUTABLE]

- entity 13: ipu3-cio2 1 (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video1
    pad0: Sink
        <- "ipu3-csi2 1":1 [ENABLED,IMMUTABLE]

- entity 19: ipu3-csi2 2 (2 pads, 1 link, 0 routes)
             type V4L2 subdev subtype Unknown flags 0
             device node name /dev/v4l-subdev2
    pad0: Sink
        [stream:0 fmt:SGRBG10_1X10/1936x1096 field:none]
    pad1: Source
        [stream:0 fmt:SGRBG10_1X10/1936x1096 field:none]
        -> "ipu3-cio2 2":0 [ENABLED,IMMUTABLE]

- entity 22: ipu3-cio2 2 (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video2
    pad0: Sink
        <- "ipu3-csi2 2":1 [ENABLED,IMMUTABLE]

- entity 28: ipu3-csi2 3 (2 pads, 1 link, 0 routes)
             type V4L2 subdev subtype Unknown flags 0
             device node name /dev/v4l-subdev3
    pad0: Sink
        [stream:0 fmt:SGRBG10_1X10/1936x1096 field:none]
    pad1: Source
        [stream:0 fmt:SGRBG10_1X10/1936x1096 field:none]
        -> "ipu3-cio2 3":0 [ENABLED,IMMUTABLE]

- entity 31: ipu3-cio2 3 (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video3
    pad0: Sink
        <- "ipu3-csi2 3":1 [ENABLED,IMMUTABLE]

nudels@nudel-5290-2in1:~$



nudels@nudel-5290-2in1:~$ media-ctl -d1 -p 
Media controller API version 6.8.12

Media device information
------------------------
driver          ipu3-imgu
model           ipu3-imgu
serial          
bus info        PCI:0000:00:05.0
hw revision     0x1028081d
driver version  6.8.12

Device topology
- entity 1: ipu3-imgu 0 (5 pads, 5 links, 0 routes)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev4
    pad0: Sink
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw
         crop:(0,0)/1920x1080
         compose:(0,0)/1920x1080]
        <- "ipu3-imgu 0 input":0 []
    pad1: Sink
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw]
        <- "ipu3-imgu 0 parameters":0 []
    pad2: Source
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw]
        -> "ipu3-imgu 0 output":0 [ENABLED,IMMUTABLE]
    pad3: Source
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw]
        -> "ipu3-imgu 0 viewfinder":0 []
    pad4: Source
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw]
        -> "ipu3-imgu 0 3a stat":0 []

- entity 7: ipu3-imgu 0 input (1 pad, 1 link)
            type Node subtype V4L flags 0
            device node name /dev/video4
    pad0: Source
        -> "ipu3-imgu 0":0 []

- entity 13: ipu3-imgu 0 parameters (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video5
    pad0: Source
        -> "ipu3-imgu 0":1 []

- entity 19: ipu3-imgu 0 output (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video6
    pad0: Sink
        <- "ipu3-imgu 0":2 [ENABLED,IMMUTABLE]

- entity 25: ipu3-imgu 0 viewfinder (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video7
    pad0: Sink
        <- "ipu3-imgu 0":3 []

- entity 31: ipu3-imgu 0 3a stat (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video8
    pad0: Sink
        <- "ipu3-imgu 0":4 []

- entity 37: ipu3-imgu 1 (5 pads, 5 links, 0 routes)
             type V4L2 subdev subtype Unknown flags 0
             device node name /dev/v4l-subdev5
    pad0: Sink
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw
         crop:(0,0)/1920x1080
         compose:(0,0)/1920x1080]
        <- "ipu3-imgu 1 input":0 []
    pad1: Sink
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw]
        <- "ipu3-imgu 1 parameters":0 []
    pad2: Source
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw]
        -> "ipu3-imgu 1 output":0 [ENABLED,IMMUTABLE]
    pad3: Source
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw]
        -> "ipu3-imgu 1 viewfinder":0 []
    pad4: Source
        [stream:0 fmt:FIXED/1920x1080 field:none colorspace:raw]
        -> "ipu3-imgu 1 3a stat":0 []

- entity 43: ipu3-imgu 1 input (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video9
    pad0: Source
        -> "ipu3-imgu 1":0 []

- entity 49: ipu3-imgu 1 parameters (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video10
    pad0: Source
        -> "ipu3-imgu 1":1 []

- entity 55: ipu3-imgu 1 output (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video11
    pad0: Sink
        <- "ipu3-imgu 1":2 [ENABLED,IMMUTABLE]

- entity 61: ipu3-imgu 1 viewfinder (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video12
    pad0: Sink
        <- "ipu3-imgu 1":3 []

- entity 67: ipu3-imgu 1 3a stat (1 pad, 1 link)
             type Node subtype V4L flags 0
             device node name /dev/video13
    pad0: Sink
        <- "ipu3-imgu 1":4 []

nudels@nudel-5290-2in1:~$

Uridium · 10. Januar 2026

Kannst Du das nochmal posten?

$ uname -a
$ sudo dmesg |grep -iE -C5 "int34|acpi|ov8858"

So wie es aussieht, wurde der Fehler

[ 3.838520] int3472-tps68470 i2c-INT3472:05: error -ENODEV: No board-data found for this model

bereits durch diesen Patch behoben. Das passierte am 2025-06-30. Der Mint Kernel 6.14.11 endete aber am 2025-06-10, also knapp verpasst. Du brauchst mindestens Kernel ~~6.15~~ 6.16. Dann sollte die erste Kamera laufen.

4nudels · 10. Januar 2026

oky dan muss auf lm 22.3 und welche kernel dass mit bringt 6.8 kan das ned rückportieren poste befehle morgen nachmittags

Ergänzung (10. Januar 2026)

Code:

nudels@nudel-5290-2in1:~$ uname -a
Linux nudel-5290-2in1 6.8.0-90-generic #91-Ubuntu SMP PREEMPT_DYNAMIC Tue Nov 18 14:14:30 UTC 2025 x86_64 x86_64 x86_64 GNU/Linux
nudels@nudel-5290-2in1:~$

Code:

nudels@nudel-5290-2in1:~$ sudo dmesg |grep -iE -C5 "int34|acpi|ov8858"
[sudo] Passwort für nudels:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000033e2dfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000033e2e000-0x0000000033e2efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000033e2f000-0x0000000033e2ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000033e30000-0x000000003ceadfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ceae000-0x000000003e672fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003e673000-0x000000003e6c8fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003e6c9000-0x000000003f001fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f002000-0x000000003fffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000048000000-0x00000000481fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000048200000-0x000000004c7fffff] reserved
--
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000022ec2017] usable
[    0.000000] reserve setup_data: [mem 0x0000000022ec2018-0x0000000022ed2057] usable
[    0.000000] reserve setup_data: [mem 0x0000000022ed2058-0x0000000033e2dfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000033e2e000-0x0000000033e2efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000033e2f000-0x0000000033e2ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000033e30000-0x000000003ceadfff] usable
[    0.000000] reserve setup_data: [mem 0x000000003ceae000-0x000000003e672fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000003e673000-0x000000003e6c8fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000003e6c9000-0x000000003f001fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000003f002000-0x000000003fffefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000003ffff000-0x000000003fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000048000000-0x00000000481fffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000048200000-0x000000004c7fffff] reserved
--
[    0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004b17fffff] usable
[    0.000000] efi: EFI v2.6 by American Megatrends
[    0.000000] efi: ACPI=0x3e684000 ACPI 2.0=0x3e684000 SMBIOS=0x3fb0f000 SMBIOS 3.0=0x3fb0e000 TPMFinalLog=0x3eca3000 ESRT=0x3fae1798 MEMATTR=0x3a3ad018 MOKvar=0x3fb0d000 INITRD=0x33f2c298 RNG=0x3e683018 TPMEventLog=0x3e675018
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem38: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem39: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem40: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
--
[    0.014131] found SMP MP-table at [mem 0x000fd030-0x000fd03f]
[    0.014150] esrt: Reserving ESRT space from 0x000000003fae1798 to 0x000000003fae17d0.
[    0.014164] Using GB pages for direct mapping
[    0.015100] secureboot: Secure boot disabled
[    0.015102] RAMDISK: [mem 0x22ed3000-0x27bb3fff]
[    0.015849] ACPI: Early table checksum verification disabled
[    0.015855] ACPI: RSDP 0x000000003E684000 000024 (v02 DELL  )
[    0.015862] ACPI: XSDT 0x000000003E6840C8 00010C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.015873] ACPI: FACP 0x000000003E6B1678 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.015883] ACPI: DSDT 0x000000003E684260 02D411 (v02 DELL   CBX3     01072009 INTL 20160422)
[    0.015889] ACPI: FACS 0x000000003EFFF180 000040
[    0.015895] ACPI: APIC 0x000000003E6B1788 0000BC (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.015900] ACPI: FPDT 0x000000003E6B1848 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.015906] ACPI: FIDT 0x000000003E6B1890 0000AC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.015912] ACPI: MCFG 0x000000003E6B1940 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.015918] ACPI: HPET 0x000000003E6B1980 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.015924] ACPI: SSDT 0x000000003E6B19B8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.015930] ACPI: SSDT 0x000000003E6B1D18 0012E0 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.015937] ACPI: HPET 0x000000003E6B2FF8 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.015944] ACPI: SSDT 0x000000003E6B3030 000A75 (v02 INTEL  xh_OEMBD 00000000 INTL 20160422)
[    0.015950] ACPI: UEFI 0x000000003E6B3AA8 000042 (v01                 00000000      00000000)
[    0.015956] ACPI: SSDT 0x000000003E6B3AF0 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.015962] ACPI: LPIT 0x000000003E6B52A0 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.015968] ACPI: DWDT 0x000000003E6B5338 000164 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.015973] ACPI: SSDT 0x000000003E6B54A0 000161 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.015979] ACPI: SSDT 0x000000003E6B5608 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.015985] ACPI: SSDT 0x000000003E6B58A8 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.015991] ACPI: SSDT 0x000000003E6B88B0 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.015997] ACPI: DBGP 0x000000003E6B8DC8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.016003] ACPI: DBG2 0x000000003E6B8E00 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.016009] ACPI: SSDT 0x000000003E6B8E58 000807 (v02 INTEL  UsbCTabl 00001000 INTL 20160422)
[    0.016015] ACPI: SSDT 0x000000003E6B9660 00E374 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.016020] ACPI: MSDM 0x000000003E6C79D8 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
[    0.016026] ACPI: SLIC 0x000000003E6C7A30 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.016032] ACPI: NHLT 0x000000003E6C7BA8 00002D (v00 INTEL  EDK2     00000002      01000013)
[    0.016038] ACPI: TPM2 0x000000003E6C7BD8 000034 (v03 DELL   CBX3     00000001 AMI  00000000)
[    0.016044] ACPI: ASF! 0x000000003E6C7C10 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.016050] ACPI: DMAR 0x000000003E6C7CB0 000114 (v01 INTEL  EDK2     00000001 INTL 00000001)
[    0.016056] ACPI: BGRT 0x000000003E6C7DC8 000038 (v00 \xf3\xee              01072009 AMI  00010013)
[    0.016061] ACPI: Reserving FACP table memory at [mem 0x3e6b1678-0x3e6b1783]
[    0.016064] ACPI: Reserving DSDT table memory at [mem 0x3e684260-0x3e6b1670]
[    0.016066] ACPI: Reserving FACS table memory at [mem 0x3efff180-0x3efff1bf]
[    0.016067] ACPI: Reserving APIC table memory at [mem 0x3e6b1788-0x3e6b1843]
[    0.016069] ACPI: Reserving FPDT table memory at [mem 0x3e6b1848-0x3e6b188b]
[    0.016071] ACPI: Reserving FIDT table memory at [mem 0x3e6b1890-0x3e6b193b]
[    0.016072] ACPI: Reserving MCFG table memory at [mem 0x3e6b1940-0x3e6b197b]
[    0.016074] ACPI: Reserving HPET table memory at [mem 0x3e6b1980-0x3e6b19b7]
[    0.016075] ACPI: Reserving SSDT table memory at [mem 0x3e6b19b8-0x3e6b1d10]
[    0.016077] ACPI: Reserving SSDT table memory at [mem 0x3e6b1d18-0x3e6b2ff7]
[    0.016078] ACPI: Reserving HPET table memory at [mem 0x3e6b2ff8-0x3e6b302f]
[    0.016080] ACPI: Reserving SSDT table memory at [mem 0x3e6b3030-0x3e6b3aa4]
[    0.016082] ACPI: Reserving UEFI table memory at [mem 0x3e6b3aa8-0x3e6b3ae9]
[    0.016083] ACPI: Reserving SSDT table memory at [mem 0x3e6b3af0-0x3e6b529d]
[    0.016085] ACPI: Reserving LPIT table memory at [mem 0x3e6b52a0-0x3e6b5333]
[    0.016086] ACPI: Reserving DWDT table memory at [mem 0x3e6b5338-0x3e6b549b]
[    0.016088] ACPI: Reserving SSDT table memory at [mem 0x3e6b54a0-0x3e6b5600]
[    0.016089] ACPI: Reserving SSDT table memory at [mem 0x3e6b5608-0x3e6b58a6]
[    0.016091] ACPI: Reserving SSDT table memory at [mem 0x3e6b58a8-0x3e6b88a9]
[    0.016093] ACPI: Reserving SSDT table memory at [mem 0x3e6b88b0-0x3e6b8dc6]
[    0.016094] ACPI: Reserving DBGP table memory at [mem 0x3e6b8dc8-0x3e6b8dfb]
[    0.016096] ACPI: Reserving DBG2 table memory at [mem 0x3e6b8e00-0x3e6b8e53]
[    0.016097] ACPI: Reserving SSDT table memory at [mem 0x3e6b8e58-0x3e6b965e]
[    0.016099] ACPI: Reserving SSDT table memory at [mem 0x3e6b9660-0x3e6c79d3]
[    0.016100] ACPI: Reserving MSDM table memory at [mem 0x3e6c79d8-0x3e6c7a2c]
[    0.016102] ACPI: Reserving SLIC table memory at [mem 0x3e6c7a30-0x3e6c7ba5]
[    0.016104] ACPI: Reserving NHLT table memory at [mem 0x3e6c7ba8-0x3e6c7bd4]
[    0.016105] ACPI: Reserving TPM2 table memory at [mem 0x3e6c7bd8-0x3e6c7c0b]
[    0.016107] ACPI: Reserving ASF! table memory at [mem 0x3e6c7c10-0x3e6c7caf]
[    0.016108] ACPI: Reserving DMAR table memory at [mem 0x3e6c7cb0-0x3e6c7dc3]
[    0.016110] ACPI: Reserving BGRT table memory at [mem 0x3e6c7dc8-0x3e6c7dff]
[    0.016414] No NUMA configuration found
[    0.016416] Faking a node at [mem 0x0000000000000000-0x00000004b17fffff]
[    0.016433] NODE_DATA(0) allocated [mem 0x4b17d5000-0x4b17fffff]
[    0.016790] Zone ranges:
[    0.016792]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
--
[    0.018716] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.018894] On node 0, zone DMA32: 12625 pages in unavailable ranges
[    0.048923] On node 0, zone Normal: 32256 pages in unavailable ranges
[    0.049304] On node 0, zone Normal: 26624 pages in unavailable ranges
[    0.049316] Reserving Intel graphics memory at [mem 0x4a800000-0x4c7fffff]
[    0.049879] ACPI: PM-Timer IO Port: 0x1808
[    0.049892] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.049895] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.049896] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.049898] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.049899] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.049901] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.049902] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.049904] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.049937] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.049942] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.049945] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.049953] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.049955] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.049966] e820: update [mem 0x3869d000-0x3875afff] usable ==> reserved
[    0.049988] TSC deadline timer available
[    0.049989] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.050021] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.050025] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
--
[    0.140207] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.146203] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.146475] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.146703] Console: colour dummy device 80x25
[    0.146708] printk: legacy console [tty0] enabled
[    0.146793] ACPI: Core revision 20230628
[    0.147139] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.147178] APIC: Switch to symmetric I/O mode setup
[    0.147181] DMAR: Host address width 39
[    0.147184] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.147202] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
--
[    0.159185] smp: Brought up 1 node, 8 CPUs
[    0.159194] smpboot: Max logical packages: 1
[    0.159198] smpboot: Total of 8 processors activated (33599.10 BogoMIPS)
[    0.160962] devtmpfs: initialized
[    0.161197] x86/mm: Memory block size: 128MB
[    0.164316] ACPI: PM: Registering ACPI NVS region [mem 0x33e2e000-0x33e2efff] (4096 bytes)
[    0.164316] ACPI: PM: Registering ACPI NVS region [mem 0x3e6c9000-0x3f001fff] (9670656 bytes)
[    0.164540] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.164557] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.164674] pinctrl core: initialized pinctrl subsystem
[    0.164942] PM: RTC time: 20:38:22, date: 2026-01-10
[    0.165948] NET: Registered PF_NETLINK/PF_ROUTE protocol family
--
[    0.166856] thermal_sys: Registered thermal governor 'step_wise'
[    0.166856] thermal_sys: Registered thermal governor 'user_space'
[    0.166856] thermal_sys: Registered thermal governor 'power_allocator'
[    0.166856] cpuidle: using governor ladder
[    0.166856] cpuidle: using governor menu
[    0.167277] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.167281] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.167510] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.167537] PCI: Using configuration type 1 for base access
[    0.167748] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.168224] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.168228] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.168231] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.168233] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.168436] ACPI: Added _OSI(Module Device)
[    0.168436] ACPI: Added _OSI(Processor Device)
[    0.168436] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.168436] ACPI: Added _OSI(Processor Aggregator Device)
[    0.257612] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.322857] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.334562] ACPI: Dynamic OEM Table Load:
[    0.334577] ACPI: SSDT 0xFFFF8CBDC204C000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.337819] ACPI: Dynamic OEM Table Load:
[    0.337831] ACPI: SSDT 0xFFFF8CBDC2052800 0005EE (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.342594] ACPI: Dynamic OEM Table Load:
[    0.342608] ACPI: SSDT 0xFFFF8CBDC2058000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.347484] ACPI: Dynamic OEM Table Load:
[    0.347495] ACPI: SSDT 0xFFFF8CBDC204F800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.350717] ACPI: Dynamic OEM Table Load:
[    0.350732] ACPI: SSDT 0xFFFF8CBDC2048000 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.362237] ACPI: _OSC evaluated successfully for all CPUs
[    0.362501] ACPI: EC: EC started
[    0.362503] ACPI: EC: interrupt blocked
[    0.379564] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.379570] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[    0.379573] ACPI: Interpreter enabled
[    0.379646] ACPI: PM: (supports S0 S3 S4 S5)
[    0.379649] ACPI: Using IOAPIC for interrupt routing
[    0.383936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.383939] PCI: Ignoring E820 reservations for host bridge windows
[    0.386575] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.413900] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[    0.480892] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.480906] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.482078] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[    0.484079] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR DPC]
[    0.484083] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.486502] PCI host bridge to bus 0000:00
[    0.486507] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.486512] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.486515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.486518] pci_bus 0000:00: root bus resource [mem 0x4c800000-0xdfffffff window]
--
[    0.512593] pci 0000:6d:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint
[    0.512655] pci 0000:6d:00.0: BAR 1 [mem 0xdc400000-0xdc400fff]
[    0.512757] pci 0000:6d:00.0: supports D1 D2
[    0.512760] pci 0000:6d:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.513000] pci 0000:00:1d.0: PCI bridge to [bus 6d]
[    0.518496] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.518621] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.518741] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.518861] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.518982] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.519102] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.519228] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.519350] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.539938] Low-power S0 idle used by default for system suspend
[    0.559620] ACPI: EC: interrupt unblocked
[    0.559623] ACPI: EC: event unblocked
[    0.559631] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.559634] ACPI: EC: GPE=0x6e
[    0.559637] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[    0.559641] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[    0.559800] iommu: Default domain type: Translated
[    0.559800] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.559800] SCSI subsystem initialized
[    0.560199] libata version 3.00 loaded.
[    0.560232] ACPI: bus type USB registered
[    0.560252] usbcore: registered new interface driver usbfs
[    0.560262] usbcore: registered new interface driver hub
[    0.560274] usbcore: registered new device driver usb
[    0.560320] pps_core: LinuxPPS API ver. 1 registered
[    0.560322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
--
[    0.561617] NetLabel:  domain hash size = 128
[    0.561619] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.561650] NetLabel:  unlabeled traffic allowed by default
[    0.561680] mctp: management component transport protocol core
[    0.561680] NET: Registered PF_MCTP protocol family
[    0.561680] PCI: Using ACPI for IRQ routing
[    0.584526] PCI: pci_cache_line_size set to 64 bytes
[    0.585193] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.585198] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.585200] e820: reserve RAM buffer [mem 0x22ec2018-0x23ffffff]
[    0.585202] e820: reserve RAM buffer [mem 0x33e2e000-0x33ffffff]
--
[    0.585289] vgaarb: loaded
[    0.585289] clocksource: Switched to clocksource tsc-early
[    0.586400] VFS: Disk quotas dquot_6.6.0
[    0.586424] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.586668] AppArmor: AppArmor Filesystem Enabled
[    0.586718] pnp: PnP ACPI init
[    0.587179] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.587185] system 00:00: [io  0xffff] has been reserved
[    0.587189] system 00:00: [io  0xffff] has been reserved
[    0.587192] system 00:00: [io  0xffff] has been reserved
[    0.587195] system 00:00: [io  0x1800-0x18fe] has been reserved
--
[    0.589219] system 00:06: [io  0xff00-0xfffe] has been reserved
[    0.591873] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.591879] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.591882] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.591885] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.600724] pnp: PnP ACPI: found 8 devices
[    0.607683] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.607793] NET: Registered PF_INET protocol family
[    0.607995] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.639584] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.639625] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.639698] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
--
[    0.641153] pci_bus 0000:6d: resource 1 [mem 0xdc400000-0xdc4fffff]
[    0.653244] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x190 took 11443 usecs
[    0.653621] PCI: CLS 128 bytes, default 64
[    0.653691] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[    0.653832] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[    0.654050] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.0
[    0.654058] DMAR: ACPI device "device:7b" under DMAR at fed91000 as 00:15.1
[    0.654063] DMAR: ACPI device "device:7c" under DMAR at fed91000 as 00:15.2
[    0.654082] DMAR: No ATSR found
[    0.654083] DMAR: No SATC found
[    0.654086] DMAR: dmar1: Using Queued invalidation
[    0.654110] Trying to unpack rootfs image as initramfs...
[    0.654211] pci 0000:00:00.0: Adding to iommu group 0
--
[    0.683865] pcieport 0000:01:00.0: enabling device (0006 -> 0007)
[    0.684306] pcieport 0000:02:01.0: enabling device (0006 -> 0007)
[    0.684565] pcieport 0000:02:02.0: enabling device (0006 -> 0007)
[    0.684844] pcieport 0000:02:04.0: enabling device (0006 -> 0007)
[    0.685137] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.695372] ACPI: AC: AC Adapter [AC] (on-line)
[    0.695507] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.695583] ACPI: button: Lid Switch [LID0]
[    0.695648] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.695706] ACPI: button: Power Button [PBTN]
[    0.695759] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.695790] ACPI: button: Sleep Button [SBTN]
[    0.695842] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.695902] ACPI: button: Power Button [PWRF]
[    0.699107] thermal LNXTHERM:00: registered as thermal_zone0
[    0.699112] ACPI: thermal: Thermal Zone [THM] (25 C)
[    0.699542] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.703528] serial 0000:00:16.3: enabling device (0001 -> 0003)
[    0.725001] 0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
[    0.727924] hpet_acpi_add: no address or irqs in _CRS
[    0.727996] Linux agpgart interface v0.103
[    0.755769] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[    0.787642] ACPI: battery: Slot [BAT0] (battery present)
[    0.906472] Freeing initrd memory: 78724K
[    1.092866] loop: module loaded
[    1.093370] ACPI: bus type drm_connector registered
[    1.093754] tun: Universal TUN/TAP device driver, 1.6
[    1.093864] PPP generic driver version 2.4.2
[    1.094106] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.094111] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.097379] i8042: Warning: Keylock active
--
[    1.196774] evm: security.apparmor
[    1.196776] evm: security.ima
[    1.196778] evm: security.capability
[    1.196780] evm: HMAC attrs: 0x1
[    1.197460] PM:   Magic number: 10:423:649
[    1.197569] acpi LNXCPU:02: hash matches
[    1.209792] RAS: Correctable Errors collector initialized.
[    1.209964] clk: Disabling unused clocks
[    1.212911] Freeing unused decrypted memory: 2028K
[    1.214391] Freeing unused kernel image (initmem) memory: 4912K
[    1.214588] Write protecting the kernel read-only data: 38912k
--
[    1.720624] tsc: Refined TSC clocksource calibration: 2112.003 MHz
[    1.720629] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e717b4f62a, max_idle_ns: 440795208866 ns
[    1.720696] clocksource: Switched to clocksource tsc
[    1.722636] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.790056] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.793120] ata2.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[    1.793123] ata2.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[    1.795181] ata2.00: ATA-10: INTEL SSDSCKJW180H6, RG11, max UDMA/133
[    1.795540] ata2.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.810521] ata2.00: Features: Dev-Sleep
[    1.813485] ata2.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[    1.813488] ata2.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[    1.830377] ata2.00: configured for UDMA/133
[    1.831338] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSCKJW18 RG11 PQ: 0 ANSI: 5
[    1.831636] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.831705] sd 1:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
[    1.831719] sd 1:0:0:0: [sda] Write Protect is off
--
[    4.828458] systemd-journald[348]: File /var/log/journal/dbaf5e29b2a34e0ba991360a29a929d5/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    5.114673] input: Intel HID events as /devices/platform/INT33D5:00/input/input19
[    5.119043] intel-hid INT33D5:00: platform supports 5 button array
[    5.122880] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input20
[    5.130014] intel_pmc_core INT33A1:00:  initialized
[    5.133519] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20230628/nsprepkg-94)
[    5.144311] Consider using thermal netlink events interface
[    5.145375] mc: Linux media interface: v0.10
[    5.161394] ACPI Warning: SystemMemory range 0x00000000FE028000-0x00000000FE0281FF conflicts with OpRegion 0x00000000FE028000-0x00000000FE028207 (\_SB.PCI0.GEXP.BAR0) (20230628/utaddress-204)
[    5.161405] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    5.179359] videodev: Linux video capture interface: v2.00
[    5.219388] intel-lpss: probe of INT3446:00 failed with error -16
[    5.221294] int3472-tps68470 i2c-INT3472:05: TPS68470 REVID: 0x21
[    5.222487] int3472-tps68470 i2c-INT3472:05: error -ENODEV: No board-data found for this model
[    5.224359] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input21
[    5.228406] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input22
[    5.239835] ipu3_imgu: module is from the staging directory, the quality is unknown, you have been warned.
[    5.239841] ipu3_imgu: module verification failed: signature and/or required key missing - tainting kernel
[    5.244133] ipu3-imgu 0000:00:05.0: enabling device (0000 -> 0002)
--
[    7.009075] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    7.009082] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    7.009087] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    7.088533] NET: Registered PF_QIPCRTR protocol family
[    7.268041] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[    7.277788] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.322713] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24
[    7.322833] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    7.322946] i915 display info: display version: 9
[    7.322949] i915 display info: cursor_needs_physical: no
[    7.322950] i915 display info: has_cdclk_crawl: no
nudels@nudel-5290-2in1:~$

4nudels · 11. Januar 2026

Wird's mit 22.3 neuere Kernel geben

Uridium · 11. Januar 2026

Offiziell nicht. Man kann aber relativ einfach auf 6.18 updaten.
https://ekiwi-blog.de/58604/linux-m...rnel-installieren-mit-ubuntu-mainline-kernel/

https://github.com/bkw777/mainline

'secure boot' sollte deaktiviert sein.

4nudels · 11. Januar 2026

oky danke mus dan überlegen was mache

Alexander2 · 11. Januar 2026

Kernel Updaten natürlich, ist das naheliegende nach den Infos jetzt :-)

4nudels · 11. Januar 2026

ev auf linux mint 23 warten komt aah 6moanten circa

Dell 5290 2in1 läuft Webcam Rückseite unter Linux Mint 22.2 cinamone?

Commander

Lt. Commander

Commander

Lt. Commander

Commander

Lt. Commander

Commander

Lt. Commander

Commander

Lt. Commander

Lt. Commander

Commander

Lt. Commander

Commander

Lt. Commander

Lt. Commander

Commander

Lt. Commander

Fleet Admiral

Lt. Commander

Ähnliche Themen

Passend zum Thema