Intel Nuc - Bluetooth/WLAN wird nicht in Ubuntu Server erkannt?

diamdomi

Admiral
Registriert
Mai 2009
Beiträge
7.448
Hi zusammen

bei mir ist folgender NUC im Einsatz: https://www.computerbase.de/preisve...7pjyhn-june-canyon-boxnuc7pjyhn-a2567349.html
Dieser hat ein Intel 9462 verbaut. Das habe ich gerade auch nochmals kontrolliert (aufgeschraubt und nachgeschaut). Bluetooth & Wlan ist im BIOS aktiv.
1667641682001.png

Heute morgen habe ich Ubuntu Server 22.04.1 frisch installiert (hat leider nur per Netinstall geklappt, aber das ist ein anderes Thema).
Dabei ist mir bei der Netzwerkauswahl schon aufgefallen, dass ich nur den Ethernetport sehe - hätte hier auch WIFI erwartet.

Nach der Installation habe ich bluez installiert und den Service Bluetooth aktiviert. Ein Reboot gab es sicherheitshalber auch. Habe auch schon verschiedene Sachen probiert, aber ich kann nirgends den Intel 9462 finden.
Code:
dominik@intelnuc:~$ sudo lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dominik@intelnuc:~$ sudo lspci
00:00.0 Host bridge: Intel Corporation Device 4e24
00:02.0 VGA compatible controller: Intel Corporation JasperLake [UHD Graphics] (rev 01)
00:04.0 Signal processing controller: Intel Corporation Dynamic Tuning service
00:08.0 System peripheral: Intel Corporation Device 4e11
00:14.0 USB controller: Intel Corporation Device 4ded (rev 01)
00:14.2 RAM memory: Intel Corporation Device 4def (rev 01)
00:15.0 Serial bus controller: Intel Corporation Serial IO I2C Host Controller (rev 01)
00:15.2 Serial bus controller: Intel Corporation Device 4dea (rev 01)
00:16.0 Communication controller: Intel Corporation Management Engine Interface (rev 01)
00:17.0 SATA controller: Intel Corporation Device 4dd3 (rev 01)
00:19.0 Serial bus controller: Intel Corporation Device 4dc5 (rev 01)
00:19.1 Serial bus controller: Intel Corporation Device 4dc6 (rev 01)
00:1a.0 SD Host controller: Intel Corporation Device 4dc4 (rev 01)
00:1c.0 PCI bridge: Intel Corporation Device 4dbc (rev 01)
00:1c.7 PCI bridge: Intel Corporation Device 4dbf (rev 01)
00:1e.0 Communication controller: Intel Corporation Device 4da8 (rev 01)
00:1e.3 Serial bus controller: Intel Corporation Device 4dab (rev 01)
00:1f.0 ISA bridge: Intel Corporation Device 4d87 (rev 01)
00:1f.4 SMBus: Intel Corporation JaserLake SMBus (rev 01)
00:1f.5 Serial bus controller: Intel Corporation JaserLake SPI (flash) Controller (rev 01)
01:00.0 Non-Volatile memory controller: Phison Electronics Corporation E12 NVMe Controller (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

rfkill list all zeigt auch nichts an.

Habe testweise ein USB Bluetooth Dongle angeschlossen. Der wurde direkt erkannt und ich konnte in Home Assistant direkt mit Bluetooth interagieren. Musste nichts im Terminal ausführen.
Code:
dominik@intelnuc:~$ sudo lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Habt ihr eine Idee? Dadurch das die Hardware nirgends auftaucht, ist entweder die Karte defekt oder es muss noch irgendwo irgendwas aktiviert werden.
 
Zuletzt bearbeitet:
Lies dich mal in CNVi ein. Ich habe ein CNVio2 unter Linux auch nicht zum laufen bekommen. Die Bluetooth Treiber sind im Firmware-Paket enthalten, ob Wifi Treiber im Kernel dabei sind weiß ich nicht. Vielleicht müssen die Treiber wegen CNVi separat eingebunden werden(Intel).
 
Internes WLAN ist nicht via USB eingebunden, sondern via PCIe.
Zeig mal die Ausgabe von
Code:
inxi -Fz
 
Habe den Bluetooth Dongle mal entfernt und sicherheitshalber neu gestartet:

Code:
dominik@intelnuc:~$ sudo inxi -Fz
[sudo] password for dominik:
System:
  Kernel: 5.15.0-52-generic x86_64 bits: 64 Console: pty pts/1
    Distro: Ubuntu 22.04.1 LTS (Jammy Jellyfish)
Machine:
  Type: Mini-pc System: Intel Client Systems product: NUC11ATKC4 v: M53052-202 serial: <filter>
  Mobo: Intel model: NUC11ATBC4 v: M53051-202 serial: <filter> UEFI: Intel
    v: ATJSLCPX.0029.2021.1117.2104 date: 11/17/2021
CPU:
  Info: quad core model: Intel Celeron N5105 bits: 64 type: MCP cache: L2: 1.5 MiB
  Speed (MHz): avg: 2800 min/max: 800/2900 cores: 1: 2800 2: 2800 3: 2800 4: 2800
Graphics:
  Device-1: Intel JasperLake [UHD Graphics] driver: i915 v: kernel
  Display: server: No display server data found. Headless machine? tty: 168x62
  Message: GL data unavailable in console for root.
Audio:
  Message: No device data found.
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: br-c4c1e70250ed state: up speed: 10000 Mbps duplex: unknown mac: <filter>
  IF-ID-2: br-dd9233c3e1a5 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
  IF-ID-3: docker0 state: down mac: <filter>
  IF-ID-4: veth162caff state: up speed: 10000 Mbps duplex: full mac: <filter>
  IF-ID-5: vethd538588 state: up speed: 10000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 232.89 GiB used: 12.1 GiB (5.2%)
  ID-1: /dev/nvme0n1 vendor: PNY model: CS3030 250GB SSD size: 232.89 GiB
Partition:
  ID-1: / size: 220.41 GiB used: 11.97 GiB (5.4%) fs: ext4 dev: /dev/dm-0
  ID-2: /boot size: 1.9 GiB used: 127.5 MiB (6.6%) fs: ext4 dev: /dev/nvme0n1p2
  ID-3: /boot/efi size: 1.05 GiB used: 5.2 MiB (0.5%) fs: vfat dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) file: /swap.img
Sensors:
  System Temperatures: cpu: 47.0 C mobo: 27.8 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 176 Uptime: 0m Memory: 7.56 GiB used: 2.87 GiB (37.9%) Init: systemd runlevel: 5
  Shell: Sudo inxi: 3.3.13
 
WLAN ist tatsächlich nicht zu sehen, evtl. eine Eigenart von Ubuntu Server (?)
Da bin ich raus, weil das habe ich hier nicht laufen.
 
Zurück
Oben