ComputerBase Menü
Aktuelles

Linux Mint 11 stürzt auf Netbook häufiger ab

P

psegma

Gast
Guten Abend CBler,

ich habe schon seit ein paar Monaten auf meinem Netbook (Typ: Asus EeePC 1000H) die Linux Distribution Mint 11, auch als Katya bekannt, installiert, da XP auf dem Netbbok, das von der Hardware ja nun wirklich eine Möhre ist, eher ruckelte und mehr schlecht als recht lief.

Seit ein paar Wochen jedoch tritt in unregelmäßigen Abständen das Phänomen auf, dass das OS 'crasht' und mich nach ein paar Sekunden zum log-in Bildschirm weiterleitet. Das ganze ist recht nervig, wie ihr euch sicherlich alle vorstellen könnt. Deshalb wollte ich hier mal nachfragen, ob einer schon ähnliche Probleme hatte.

Ich hab zwar schon ein bisschen gegooglet, aber nichts aufschlußreiches gefunden, bin auch kein Experte im umgang mit Linux, dies ist mit der Ausnahme von parted magic und gparted mein erster richtiger Kontakt mit Linux.

Einzige Auffälligkeit: in >90% der Fälle habe ich gerade Opera verwendet, was an sich allerdings nicht ungewöhnlich ist, da ich das Netbook fast ausschließlich zum surfen benutze.


Ich hoffe ihr könnt mir helfen.

Danke schon mal im Voraus und einen schönen Abend.

psegma
 
Das klingt für mich so als würde sich der X-Server verabschieden.
Leider weiß ich a) nicht ob das stimmt und b) nicht ob dir das weiterhilft, sollte die Vermutung stimmen. Vielleicht kann ja jemand anders noch etwas detaillierteres beitragen.
 
Ja das ist definitiv der X-Server (oder gdm).

Wenn das ganze wieder passiert, poste mal die Ausgabe des "dmesg"-Befehls. Die Inhalte von /var/log/Xorg.0.log etc. könnten auch helfen.
 
Eventuell Probleme mit Flash?
Videobeschleunigung die dann zu dem Problem führt.

Schau mal dass Flash aktuell ist.
Welche Grafikhardware ist da verbaut?

Gruß.
 
Könnte aber auch an Opera oder Flash, wie schon vermutet liegen.

Das kann gerne auch mal den X-Server mitreißen und zum Neustart zwingen. dmesg wäre aber trotzdem schön :)
 
Hey, vielen Dank schon mal für eure Antworten.

Das mit Flash ist durchaus möglich, die Videowiedergabe ließ stets zu wünschen übrig, sodass ich ich vor einiger Zeit irgendetwas für Flash runtergeladen habe. Gibt es eine Möglichkeit über den Paketmanager herauszufinden was es war?


dmesg output schrieb:
Code: 
[    0.223756] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[    0.223897] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[    0.223909] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[    0.223920] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
[    0.223992] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[    0.224056] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.224078] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.224101] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.224124] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.224148] pci 0000:00:1f.2: reg 20: [io  0xffa0-0xffaf]
[    0.224220] pci 0000:00:1f.2: PME# supported from D3hot
[    0.224235] pci 0000:00:1f.2: PME# disabled
[    0.224347] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.224360] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.224374] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.224391] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.224516] pci 0000:03:00.0: [1969:1026] type 0 class 0x000200
[    0.224563] pci 0000:03:00.0: reg 10: [mem 0xfbfc0000-0xfbffffff 64bit]
[    0.224589] pci 0000:03:00.0: reg 18: [io  0xec00-0xec7f]
[    0.224725] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.224738] pci 0000:03:00.0: PME# disabled
[    0.224780] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.224806] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.224818] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.224831] pci 0000:00:1c.1:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.224848] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.224944] pci 0000:00:1c.3: PCI bridge to [bus 01-02]
[    0.224959] pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
[    0.224974] pci 0000:00:1c.3:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.224993] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.225116] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.225129] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.225143] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.225159] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.225170] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.225180] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.225190] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.225200] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.225210] pci 0000:00:1e.0:   bridge window [mem 0x3f800000-0xffffffff] (subtractive decode)
[    0.225253] pci_bus 0000:00: on NUMA node 0
[    0.225269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.225766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.225856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.226027]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.249161] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.249348] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.249529] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.249721] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.249904] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.250095] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.250281] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.250467] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.250844] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.250875] vgaarb: loaded
[    0.251746] SCSI subsystem initialized
[    0.251951] libata version 3.00 loaded.
[    0.252193] usbcore: registered new interface driver usbfs
[    0.252244] usbcore: registered new interface driver hub
[    0.252376] usbcore: registered new device driver usb
[    0.252840] wmi: Mapper loaded
[    0.252848] PCI: Using ACPI for IRQ routing
[    0.252914] PCI: pci_cache_line_size set to 64 bytes
[    0.253049] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.253059] reserve RAM buffer: 000000003f7a0000 - 000000003fffffff 
[    0.253437] NetLabel: Initializing
[    0.253444] NetLabel:  domain hash size = 128
[    0.253450] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.253484] NetLabel:  unlabeled traffic allowed by default
[    0.253628] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.253643] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.253659] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.257087] Switching to clocksource hpet
[    0.258077] Switched to NOHz mode on CPU #0
[    0.258130] Switched to NOHz mode on CPU #1
[    0.279130] AppArmor: AppArmor Filesystem Enabled
[    0.279214] pnp: PnP ACPI init
[    0.279271] ACPI: bus type pnp registered
[    0.279583] pnp 00:00: [bus 00-ff]
[    0.279593] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.279602] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.279611] pnp 00:00: [io  0x0d00-0xffff window]
[    0.279620] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.279629] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.279638] pnp 00:00: [mem 0x3f800000-0xffffffff window]
[    0.279827] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.279871] pnp 00:01: [mem 0xfed13000-0xfed19fff]
[    0.280070] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[    0.280083] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.280151] pnp 00:02: [dma 4]
[    0.280159] pnp 00:02: [io  0x0000-0x000f]
[    0.280167] pnp 00:02: [io  0x0081-0x0083]
[    0.280174] pnp 00:02: [io  0x0087]
[    0.280182] pnp 00:02: [io  0x0089-0x008b]
[    0.280189] pnp 00:02: [io  0x008f]
[    0.280197] pnp 00:02: [io  0x00c0-0x00df]
[    0.280293] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.280336] pnp 00:03: [io  0x0070-0x0071]
[    0.280362] pnp 00:03: [irq 8]
[    0.280467] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.280589] pnp 00:04: [io  0x0060]
[    0.280597] pnp 00:04: [io  0x0064]
[    0.280613] pnp 00:04: [irq 1]
[    0.280715] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.280838] pnp 00:05: [irq 12]
[    0.280944] pnp 00:05: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f13 (active)
[    0.280980] pnp 00:06: [io  0x0061]
[    0.281085] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.281123] pnp 00:07: [io  0x00f0-0x00ff]
[    0.281140] pnp 00:07: [irq 13]
[    0.281244] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.281668] pnp 00:08: [io  0x0010-0x001f]
[    0.281679] pnp 00:08: [io  0x0022-0x003f]
[    0.281688] pnp 00:08: [io  0x0044-0x004d]
[    0.281695] pnp 00:08: [io  0x0050-0x005e]
[    0.281703] pnp 00:08: [io  0x0063]
[    0.281710] pnp 00:08: [io  0x0065]
[    0.281717] pnp 00:08: [io  0x0067-0x006f]
[    0.281724] pnp 00:08: [io  0x0072-0x007f]
[    0.281732] pnp 00:08: [io  0x0080]
[    0.281739] pnp 00:08: [io  0x0084-0x0086]
[    0.281746] pnp 00:08: [io  0x0088]
[    0.281758] pnp 00:08: [io  0x008c-0x008e]
[    0.281766] pnp 00:08: [io  0x0090-0x009f]
[    0.281774] pnp 00:08: [io  0x00a2-0x00bf]
[    0.281781] pnp 00:08: [io  0x00e0-0x00ef]
[    0.281789] pnp 00:08: [io  0x025c-0x025f]
[    0.281796] pnp 00:08: [io  0x0380-0x0383]
[    0.281804] pnp 00:08: [io  0x0400-0x041f]
[    0.281812] pnp 00:08: [io  0x04d0-0x04d1]
[    0.281819] pnp 00:08: [io  0x0800-0x087f]
[    0.281828] pnp 00:08: [io  0x0400-0x03ff disabled]
[    0.281835] pnp 00:08: [io  0x0480-0x04bf]
[    0.281844] pnp 00:08: [mem 0x8c000000-0x8c01ffff]
[    0.281852] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.281861] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[    0.281869] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[    0.281877] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[    0.281885] pnp 00:08: [mem 0xfff00000-0xffffffff]
[    0.282126] system 00:08: [io  0x025c-0x025f] has been reserved
[    0.282137] system 00:08: [io  0x0380-0x0383] has been reserved
[    0.282147] system 00:08: [io  0x0400-0x041f] has been reserved
[    0.282157] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.282167] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.282178] system 00:08: [io  0x0480-0x04bf] has been reserved
[    0.282189] system 00:08: [mem 0x8c000000-0x8c01ffff] has been reserved
[    0.282200] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.282211] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.282222] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.282233] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.282244] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
[    0.282256] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282479] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    0.282592] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.282783] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.282793] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.282959] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.282971] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.282983] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283115] pnp 00:0b: [mem 0xe0000000-0xe3ffffff]
[    0.283261] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.283274] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283933] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.283943] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.283952] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.283960] pnp 00:0c: [mem 0x00100000-0x3f7fffff]
[    0.283969] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[    0.284225] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.284238] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.284248] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.284259] system 00:0c: [mem 0x00100000-0x3f7fffff] could not be reserved
[    0.284272] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.284814] pnp: PnP ACPI: found 13 devices
[    0.284822] ACPI: ACPI bus type pnp unregistered
[    0.284833] PnPBIOS: Disabled by ACPI PNP
[    0.326969] pci 0000:00:1c.0: BAR 14: assigned [mem 0x3f800000-0x3f9fffff]
[    0.326986] pci 0000:00:1c.0: BAR 15: assigned [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    0.327000] pci 0000:00:1c.1: BAR 15: assigned [mem 0x3fc00000-0x3fdfffff 64bit pref]
[    0.327014] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.327026] pci 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
[    0.327035] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.327046] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.327060] pci 0000:00:1c.0:   bridge window [mem 0x3f800000-0x3f9fffff]
[    0.327074] pci 0000:00:1c.0:   bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    0.327091] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.327101] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.327115] pci 0000:00:1c.1:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.327128] pci 0000:00:1c.1:   bridge window [mem 0x3fc00000-0x3fdfffff 64bit pref]
[    0.327145] pci 0000:00:1c.3: PCI bridge to [bus 01-02]
[    0.327155] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.327169] pci 0000:00:1c.3:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.327182] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.327198] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.327205] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.327218] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.327229] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.327256] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.327298] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.327312] pci 0000:00:1c.0: setting latency timer to 64
[    0.327343] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.327356] pci 0000:00:1c.1: setting latency timer to 64
[    0.327373] pci 0000:00:1c.3: enabling device (0106 -> 0107)
[    0.327397] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.327409] pci 0000:00:1c.3: setting latency timer to 64
[    0.327428] pci 0000:00:1e.0: setting latency timer to 64
[    0.327440] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.327449] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.327458] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.327467] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.327477] pci_bus 0000:00: resource 8 [mem 0x3f800000-0xffffffff]
[    0.327486] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.327495] pci_bus 0000:04: resource 1 [mem 0x3f800000-0x3f9fffff]
[    0.327505] pci_bus 0000:04: resource 2 [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    0.327514] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.327523] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.327533] pci_bus 0000:03: resource 2 [mem 0x3fc00000-0x3fdfffff 64bit pref]
[    0.327543] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.327552] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
[    0.327561] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.327571] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.327580] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.327589] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.327598] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.327607] pci_bus 0000:05: resource 8 [mem 0x3f800000-0xffffffff]
[    0.327717] NET: Registered protocol family 2
[    0.327927] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.328847] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.329947] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.330518] TCP: Hash tables configured (established 131072 bind 65536)
[    0.330528] TCP reno registered
[    0.330548] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.330583] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.330902] NET: Registered protocol family 1
[    0.330954] pci 0000:00:02.0: Boot video device
[    0.331149] PCI: CLS 32 bytes, default 64
[    0.331882] cpufreq-nforce2: No nForce2 chipset.
[    0.332434] audit: initializing netlink socket (disabled)
[    0.332463] type=2000 audit(1328202881.328:1): initialized
[    0.357274] highmem bounce pool size: 64 pages
[    0.357292] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.364397] VFS: Disk quotas dquot_6.5.2
[    0.364612] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.367268] fuse init (API version 7.16)
[    0.367633] msgmni has been set to 1693
[    0.368550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.368650] io scheduler noop registered
[    0.368657] io scheduler deadline registered
[    0.368733] io scheduler cfq registered (default)
[    0.369075] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.369174] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.369346] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.369431] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.369597] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.369687] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.369981] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.370083] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.370298] intel_idle: MWAIT substates: 0x20220
[    0.370317] intel_idle: v0.4 model 0x1C
[    0.370323] intel_idle: lapic_timer_reliable_states 0x2
[    0.370342] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.370573] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.370761] ACPI: AC Adapter [AC0] (on-line)
[    0.371141] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.376191] ACPI: Lid Switch [LID]
[    0.376402] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.376419] ACPI: Sleep Button [SLPB]
[    0.376577] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.376590] ACPI: Power Button [PWRB]
[    0.376759] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.376772] ACPI: Power Button [PWRF]
[    0.377331] ACPI: acpi_idle yielding to intel_idle
[    0.392275] thermal LNXTHERM:00: registered as thermal_zone0
[    0.392286] ACPI: Thermal Zone [TZ00] (29 C)
[    0.392385] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.392592] ERST: Table is not found!
[    0.392848] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.393280] ACPI: Battery Slot [BAT0] (battery absent)
[    0.393335] isapnp: Scanning for PnP cards...
[    0.747853] isapnp: No Plug & Play device found
[    1.127696] Freeing initrd memory: 18088k freed
[    1.164108] Linux agpgart interface v0.103
[    1.164270] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.164428] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.164612] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.164860] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.168218] brd: module loaded
[    1.169825] loop: module loaded
[    1.170094] i2c-core: driver [adp5520] using legacy suspend method
[    1.170100] i2c-core: driver [adp5520] using legacy resume method
[    1.170348] ata_piix 0000:00:1f.2: version 2.13
[    1.170378] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.170389] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.170461] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.171301] scsi0 : ata_piix
[    1.171553] scsi1 : ata_piix
[    1.174334] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.174342] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.175514] Fixed MDIO Bus: probed
[    1.175630] PPP generic driver version 2.4.2
[    1.175796] tun: Universal TUN/TAP device driver, 1.6
[    1.175802] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.176069] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.176139] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.176173] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.176182] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.176293] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.176400] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.176420] ehci_hcd 0000:00:1d.7: debug port 1
[    1.180328] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.180363] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[    1.196035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.196365] hub 1-0:1.0: USB hub found
[    1.196377] hub 1-0:1.0: 8 ports detected
[    1.196568] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.196609] uhci_hcd: USB Universal Host Controller Interface driver
[    1.196691] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.196706] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.196714] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.196825] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.196920] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[    1.197245] hub 2-0:1.0: USB hub found
[    1.197257] hub 2-0:1.0: 2 ports detected
[    1.197411] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.197425] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.197433] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.197534] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.197643] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[    1.197969] hub 3-0:1.0: USB hub found
[    1.197980] hub 3-0:1.0: 2 ports detected
[    1.198152] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.198168] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.198175] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.198279] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.200117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[    1.200455] hub 4-0:1.0: USB hub found
[    1.200467] hub 4-0:1.0: 2 ports detected
[    1.200622] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.200637] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.200644] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.200749] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.200862] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[    1.201187] hub 5-0:1.0: USB hub found
[    1.201199] hub 5-0:1.0: 2 ports detected
[    1.201491] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.227374] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.227392] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.227746] mousedev: PS/2 mouse device common for all mice
[    1.229696] rtc_cmos 00:03: RTC can wake from S4
[    1.229863] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.229910] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.230171] device-mapper: uevent: version 1.0.3
[    1.230394] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    1.230585] device-mapper: multipath: version 1.2.0 loaded
[    1.230594] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.230824] EISA: Probing bus 0 at eisa.0
[    1.230831] EISA: Cannot allocate resource for mainboard
[    1.230838] Cannot allocate resource for EISA slot 1
[    1.230843] Cannot allocate resource for EISA slot 2
[    1.230849] Cannot allocate resource for EISA slot 3
[    1.230855] Cannot allocate resource for EISA slot 4
[    1.230860] Cannot allocate resource for EISA slot 5
[    1.230866] Cannot allocate resource for EISA slot 6
[    1.230872] Cannot allocate resource for EISA slot 7
[    1.230877] Cannot allocate resource for EISA slot 8
[    1.230882] EISA: Detected 0 cards.
[    1.231202] cpuidle: using governor ladder
[    1.231480] cpuidle: using governor menu
[    1.232170] TCP cubic registered
[    1.232545] NET: Registered protocol family 10
[    1.233818] NET: Registered protocol family 17
[    1.233866] Registering the dns_resolver key type
[    1.234657] Using IPI No-Shortcut mode
[    1.234970] PM: Hibernation image not present or could not be loaded.
[    1.234996] registered taskstats version 1
[    1.235405]   Magic number: 0:96:238
[    1.235569] rtc_cmos 00:03: setting system clock to 2012-02-02 17:14:42 UTC (1328202882)
[    1.235577] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.235582] EDD information not available.
[    1.254056] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.336821] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[    1.336838] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.352813] ata1.00: configured for UDMA/133
[    1.353277] scsi 0:0:0:0: Direct-Access     ATA      ST9160310AS      0303 PQ: 0 ANSI: 5
[    1.353758] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.353790] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.354011] sd 0:0:0:0: [sda] Write Protect is off
[    1.354022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.354130] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.508147] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    1.644626]  sda: sda1 sda2 < sda5 >
[    1.645713] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.645808] Freeing unused kernel memory: 700k freed
[    1.646340] Write protecting the kernel text: 5192k
[    1.646435] Write protecting the kernel read-only data: 2148k
[    1.711417] <30>udev[68]: starting version 167
[    1.978161] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    1.978350] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.999090] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.999120] ATL1E 0000:03:00.0: setting latency timer to 64
[    2.165693] [drm] Initialized drm 1.1.0 20060810
[    2.286609] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.286621] i915 0000:00:02.0: setting latency timer to 64
[    2.325481] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.325491] [drm] Driver supports precise vblank timestamp query.
[    2.398233] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.398675] [drm] initialized overlay support
[    2.674608] Console: switching to colour frame buffer device 128x37
[    2.674685] fb0: inteldrmfb frame buffer device
[    2.674693] drm: registered panic notifier
[    2.675084] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.192227] Btrfs loaded
[    3.208800] xor: automatically using best checksumming function: pIII_sse
[    3.228029]    pIII_sse  :  4850.000 MB/sec
[    3.228039] xor: using function: pIII_sse (4850.000 MB/sec)
[    3.236125] device-mapper: dm-raid45: initialized v0.2594b
[    3.956782] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   17.346623] Adding 1038332k swap on /dev/sda5.  Priority:-1 extents:1 across:1038332k 
[   17.385369] <30>udev[319]: starting version 167
[   17.478811] lp: driver loaded but no devices found
[   17.684160] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.942961] eeepc_laptop: Eee PC Hotkey Driver
[   17.942985] eeepc_laptop: Hotkey init flags 0x41
[   17.974680] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[   17.985470] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
[   17.985489] eeepc_laptop: Get control methods supported: 0x6101713
[   17.995623] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6
[   18.194346] intel_rng: FWH not detected
[   18.394470] leds_ss4200: no LED devices found
[   19.852005] psmouse serio1: ID: 10 00 64
[   19.941825] ATL1E 0000:03:00.0: irq 43 for MSI/MSI-X
[   19.942018] ATL1E 0000:03:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[   19.942723] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.943343] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.058227] elantech: assuming hardware version 2, firmware version 2.0.48
[   20.115634] Linux video capture interface: v2.00
[   20.137208] elantech: Synaptics capabilities query result 0x00, 0x02, 0x64.
[   20.350958] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[   20.813280] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[   20.841141] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[   20.841850] usbcore: registered new interface driver uvcvideo
[   20.841859] USB Video Class driver (v1.0.0)
[   21.524851] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.524989] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   21.525054] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   21.656184] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   21.657151] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   22.255089] ppdev: user-space parallel port driver
[   29.660158] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
Zum Vergrößern anklicken....

Die logs poste ich später, bin grade etwas unter Zeitdruck.

Vielen Dank nochmal für eure Hilfe.

psegma
 
Ok bin auch etwas unter Zeitdruck deswegen kann ich mir die Ausgabe von dmesg nicht gleich ansehen.

Was war denn das was du für Flash geladen hast? Ging das über die Paketverwaltung oder hast du was kompiliert/kopiert? Ersteres ist gut das ist herauszufinden, zweiteres wird etwas schwerer.
 
Ich bin mir recht sicher, dass es über die Paketverwaltung, eventuell sogar die Softwareverwaltung lief. Ich hab mich gewundert, warum das Netbook eben mit der Videowiedergabe zu kämpfen hat, also hab ich was gegoogelt und in einem Linux Mint Forum den Tipp gelesen, dass man ein Zusatzpaket für Flash herunterladen soll, was ich dann ja auch getan habe.

Wie kann ich denn die Flashversion prüfen?

Angenehme Nachtruhe

psegma
 
Suche einfach in der Paketverwaltung nach Flash.
Dann müsstest du auch das Zusatzpaket finden.

Gruß.
 
AW: Linux Mint 11 schmiert immer noch auf Netbook ab

Hey,

kleines Update:

Ich hab jetzt mal alle flash-Pakete überprüft aber nix gefunden; das Paket, dass ich runtergeladen habe war ein Zusatzpaket für den flashplayer aber auch ohne das Paket tritt der Fehler auf. Mehr noch, heute ist es sogar nur beim chatten passiert und langsam geht mir das extrem auf die Nerven.


Soll ich noch irgendwelche logs posten? Sagt sofort Bescheid, wenn ihr irgendwelche Infos braucht, antworte so schnell und präzise wie möglich.


Gruß
psegma
 
Poste doch bitte mal /var/log/Xorg.0.log. Dann bitte /etc/X11/xorg.conf.

Was hast du denn für einen Kernel? Evtl benötigt Gnome zu viele Ressourcen. Probier mal z.b. LXDE für dein Mint zu installieren. Da brauchst du erst mal nicht weiter an deinem System zu verändern.

Aber poste erst mal die Ausgaben von oben
 
Vielleicht doch eher ein Problem mit mangelnden Reourcen für die Gnome Desktop-Vaiante?

Es gibt von Ubuntu Oberflächen die extra für Netbooks entwickelt wurden und etwas mehr in Richtung Ressourcenschonen getrimmt sind. Die Gnome Variante gibts mit ubuntu-netbook, LXDE ist glaub ich mit lubuntu-netbook installierbar.

In der Xorg.0.log konnte ich keine Fehler finden. Die xorg.conf ist seit einigen Monaten nur noch optional wenn proprietäre Treiber genutzt werden z.b., die Intel Chipsätze werden über HAL erkannt welches wiederum X "informiert". Passt soweit also alles.

Falls doch noch mal sein sollte bitte melden :-)
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Passend zum Thema

Zurück
Oben

Willkommen auf ComputerBase!

Mit Werbung weiterlesen

Besuche ComputerBase wie gewohnt mit Werbung und Tracking. Die Zustimmung ist jederzeit widerrufbar.

Details im Privacy Center und in der Liste unserer Partner. Ein Widerruf ist möglich in der Datenschutzerklärung.

… oder ComputerBase Pro bestellen

Nutze ComputerBase ohne Werbebanner, Video-Ads und Werbetracking schon für 4 €/Monat oder 36 €/Jahr.

Mehr zu ComputerBase Pro

Bereits Pro-Nutzer? Hier anmelden.

Tracking: Wir und unsere 187 Partner verarbeiten personenbezogene Daten, indem wir mit auf Ihrem Gerät gespeicherten Informationen (z. B. eindeutige Kennungen in Cookies) ein Nutzungsprofil erstellen, um z. B. Anzeigen zu personalisieren. Verarbeitungszwecke: Genaue Standortdaten und Abfrage von Geräteeigenschaften zur Identifikation, Informationen auf einem Gerät speichern und/oder abrufen, Personalisierte Anzeigen und Inhalte, Anzeigen- und Inhaltsmessungen, Erkenntnisse über Zielgruppen und Produktentwicklungen.

Impressum Kontakt Datenschutz