Ständiger BlueScreen :(

aPollO

Lt. Junior Grade
Registriert
Apr. 2008
Beiträge
360
Ich habe seit einer weile ab und zu einen Bluescreen immer mit der selben Begründung. Anfangs hat es mich nicht gestört da es immer dierekt nach dem Hochfahren war und eher selten bis sehr selten vorgekommen ist, doch seit 2 tagen habe ich glück wenn der pc mal anbleibt.

Als Meldung erscheint immer "PAGE_FAULT_IN_NOPAGED_AREA" und der Fehlercode
Code:
*** STOP: 0x00000050 ( 0x9D1288EE, 0x00000000, 0x8052AC74, 0x00000000 )

Woran liegt das? Ich hab keine Lust nach nur 5 Wochen schonwieder XP neu raufzuziehen....langsam kotzt es mich an, hätt ich DSL wäre schon längst Ubuntu drauf -.-

EDIT: also mir is aufgefallen das im Fehlercode öfters 0x8052AC74 vorkommt der rest ist immer anderst......danach hab ich jetzt mal gegoogelt und festgestellt das fast alle die das angezeigt bekommen eine Asus EN8800GTS 640MB haben.....wie ich auch
 
Zuletzt bearbeitet:
Moin,

Resolving the Problem

Faulty hardware. Stop 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM). If hardware has been added to the system recently, remove it to see if the error recurs. If existing hardware has failed, remove or replace the faulty component. You need to run hardware diagnostics supplied by the system manufacturer. For details on these procedures, see the owners manual for your computer.

Buggy system service. Often, the installation of a buggy system service is a culprit. Disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service about a possible update. If the error occurs during system startup, restart your computer, and press F8 at the character-mode screen that displays the prompt For troubleshooting and advanced startup options for Windows 2000, press F8. On the resulting Windows 2000 Advanced Options menu, choose the Last Known Good Configuration option. This option is most effective when only one driver or service is added at a time.

Antivirus software. Antivirus software can also trigger this error. Disable the program and confirm that this resolves the error. If it does, contact the manufacturer of the program about a possible update.

Corrupted NTFS volume. A corrupted NTFS volume can also generate this error. Run Chkdsk /f /r to detect and repair disk errors. You must restart the system before the disk scan begins on a system partition. If you cannot start the system due to the error, use the Recovery Console and run Chkdsk /r . For more information about the Recovery Console, see Troubleshooting Tools and Strategies in this book. If the hard disk is a SCSI disk, check for problems between the SCSI controller and the disk.

Lass mal memtest86+ rennen und auch gleich noch chkdsk.

Mfg
 
danke werd ich jetzt mal machen. wie starte ich chkdsk ohne diskettenlaufwerk und wenn windows immer gleich einen BS anzeigt nachdem es hochgefahren ist?
 
Wäre auch nicht schlecht, wenn du mal alle Infos zu deinem System liefern würdest. Und ist dein System übertaktet?
 
Core 2 Duo E6600
MSI P965 Neo
2GB DDR2 Kingston PC800
Asus EN8800GTS 640MB
160GB Maxtor Sata2

Übertacktet habe ich nichts, nur die Grafikkarte ist Untertacktet, das Problem tritt aber auch bei Standarttackt auf.
 
Welchen Kingston-Speicher hast du genau? Evtl. braucht der ein wenig mehr Spannung. Bei wieviel Vlt. läuft der jetzt? Ich hatte damals auch ewig Blue-Screens. Lag' daran, das mein Ram 0,1V mehr Spannung haben wollte. Aber teste auch mal beide Riegel allein, vllt. ist auch einer defekt.
 
welcher das genau ist weiss ich nich :-/
ich versuchs mal rauszubekommen wenn er mal kurz anbleibt und cpu-z startet. aber nachdem er ja eigentlich immer lief bis vor 2 monaten und ich nichts am BIOS verändert habe kann ich mir das nich vorstellen.....ausser das ich vor ein paar tagen das BIOS geflashed hab aber danach lief er ja auch noch 3 tage ohne probleme

so geht wieder alles glaube ich danke für eure hilfe
 
Zuletzt bearbeitet von einem Moderator: (Doppelpost zusammengeführt, bitte "Ändern" - Button nutzen.)
Zurück
Oben