Unterschied UEFI/non-UEFI bei Grafikkarten?

d00d

Lt. Junior Grade
Registriert
Nov. 2007
Beiträge
448
Hallo Gemeinde,

ich möchte mir mal wieder eine neue Grafikkarte anschaffen und habe mir die Sapphire R9 280x ausgesucht. Nun gibt es hier zwei Versionen:

  1. SAPPHIRE TRI-X R9 280X 3GB GDDR5 OC VERSION
  2. SAPPHIRE TRI-X R9 280X 3GB GDDR5 OC (UEFI)


Geh ich recht in der Annahme, dass ich zweitere auch bei einem Mainboard mit herkömmlichen BIOS verwenden kann? Falls ja, wieso gibt es zwei Versionen wenn die UEFI Version eigentlich nur Vorteile bringt?
 
http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1227&lid=1&pid=2072

und einfach unter UEFI mal schauen was das heisst.



UEFI BIOS support

1) Pre-OS and network security: Sapphire HD 7730/UEFI ready products equip the UEFI firmware that is digitally signed and approved by Microsoft for Secure Boot. With Windows 8’s secured boot architecture and its establishment of a root of trust, the customer is protected from malicious code executing in the boot path by ensuring that only signed, certified “known good” code and boot loaders can execute before the operating system itself loads.
2) Faster boot and resume times: When compared to the legacy BIOS, systems with UEFI has a much faster boot and resume time to the OS.

The SAPPHIRE HD 7730 UEFI edition/UEFI ready products are compatible with motherboards that comply with UEFI Specification 2.3.1 or after. It is also compatible with motherboards that do not have UEFI feature. Motherboards that contain earlier version of UEFI must be updated to the latest version or have the UEFI option turned off, otherwise, the graphics card will boot in legacy mode, or in some cases, not boot at all. Please refer to your motherboard userguide for BIOS update instruction.
 
xxMuahdibxx schrieb:
2) Faster boot and resume times: When compared to the legacy BIOS, systems with UEFI has a much faster boot and resume time to the OS.
Jap, mit nem GOP BIOS lässt sich auf Mainboards teilweise der Ultra Fast Boot Mode aktivieren.
 
Hey, sorry dass ich den Thread ausgrabe, aber ich habe ein Problem mit Ultra Fast Boot.

Ich wollte Ultra Fast Boot aktivieren, aber nach verlassen des UEFI und Neustart gab es 4x ein lautes Piepsen und im UEFI hatte sich die Option wieder auf Fast Boot umgestellt. Also dachte ich, ich betätige mal den Schalter an der Graka, weil vielleicht das Legacy BIOS noch an ist. Wenn ich dann Ultra Fast Boot aktiviere bootet der Rechner immer automatisch ins UEFI ( wtf?! :freaky: ) Habe leider nicht soviel Plan von UEFI und auch nicht von GOP, ist irgendwie alles an mir vorbeigegangen.

Mainboard: Asrock Fatal1ty Z97 Killer (UEFI: P1.90)
SSD (System): SanDisk 128GB
VGA: Sapphire R9 290 Tri-X OC (New Edition)

Wäre echt nice, wenn mir da jemand helfen könnte. Danke schonmal!
 
Zuletzt bearbeitet:
Danke für die Antwort! :)

Weiß ich nicht. Denke mal nein, zumal bei WIndowsinstallation die R9 290 noch nicht eingebaut war. Woran sehe ich das?

Edit: Ok, Google sagt mir was von einer GPT-Partition etc. Nein, das habe ich überhaupt nicht gemacht. Ja dann verzichte ich wohl auf ULTRA FAST ÜBER HYPER DUPER BOOST BOOT ^^

Ist auch so schnell genug ..

Danke nochmal!
 
Zuletzt bearbeitet: (Rechtschreibung)
Zurück
Oben