HD Tune SMART-Anzeige
- Ersteller Madmax
- Erstellt am
Mueli
Admiral
- Registriert
- Aug. 2005
- Beiträge
- 7.542
Du solltest keinen Selbstest initiieren, sondern einfach nur die Informationen abrufen!
Wie folgt sollte es dann aussehen (l:\ ist bei mir eine 30 GB Partition auf einem 30GB IBM-Drive):
Den Selbsttest macht die Disk selber in Abständen, wenn dann Zugriffe stattfinden pausiert der Test!
Wie folgt sollte es dann aussehen (l:\ ist bei mir eine 30 GB Partition auf einem 30GB IBM-Drive):
Code:
smartctl 5.39 2008-05-30 19:35 [i686-mingw32-xp-sp2] (cf-win32-20080531)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Maxtor Fireball 3 family
Device Model: Maxtor 2F030J0
Serial Number: F10XG0KE
Firmware Version: VAM51JJ0
User Capacity: 30.750.031.872 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Feb 11 11:28:20 2009 WN
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1261) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 21) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 235 234 063 Pre-fail Always - 4248
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 207
5 Reallocated_Sector_Ct 0x0033 241 241 063 Pre-fail Always - 62
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 224 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 253 233 187 Pre-fail Always - 48312
9 Power_On_Minutes 0x0032 121 121 000 Old_age Always - 1091h+33m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 242
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 132
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 1545
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 42
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 41345
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 252 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 198 000 Old_age Always - 341
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 250 180 Pre-fail Always - 244
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 164 162 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 59 inconsistent with error log pointer 5
ATA Error Count: 59 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 59 occurred at disk power-on lifetime: 41853 hours (1743 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 b7 72 25 52 Error: UNC 4 sectors at LBA = 0x022572b7 = 36008631
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b7 72 25 52 00 38d+03:28:23.872 READ DMA
c8 00 08 0f 56 2b 52 00 38d+03:28:23.680 READ DMA
c8 00 08 cf ea 2a 52 00 38d+03:28:23.632 READ DMA
c8 00 08 97 6e 2b 52 00 38d+03:28:23.616 READ DMA
c8 00 08 4f 2e 2b 52 00 38d+03:28:23.600 READ DMA
Error 58 occurred at disk power-on lifetime: 41853 hours (1743 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 17 4d 25 52 Error: UNC 8 sectors at LBA = 0x02254d17 = 35998999
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 17 4d 25 52 00 38d+03:28:21.040 READ DMA
c8 00 08 7f 72 22 52 00 38d+03:28:21.024 READ DMA
c8 00 08 87 df 23 52 00 38d+03:28:21.024 READ DMA
c8 00 08 57 64 2b 52 00 38d+03:28:21.008 READ DMA
c8 00 08 ef 19 2c 52 00 38d+03:28:21.008 READ DMA
Error 57 occurred at disk power-on lifetime: 41853 hours (1743 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 57 72 25 52 Error: UNC 7 sectors at LBA = 0x02257257 = 36008535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 57 72 25 52 00 38d+03:27:08.176 READ DMA
c8 00 08 57 72 25 52 00 38d+03:27:06.416 READ DMA
c8 00 08 87 75 2b 52 00 38d+03:27:06.416 READ DMA
c8 00 08 07 52 2b 52 00 38d+03:27:06.384 READ DMA
c8 00 08 df a3 27 52 00 38d+03:27:06.368 READ DMA
Error 56 occurred at disk power-on lifetime: 41853 hours (1743 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 57 72 25 52 Error: UNC 7 sectors at LBA = 0x02257257 = 36008535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 57 72 25 52 00 38d+03:27:06.416 READ DMA
c8 00 08 87 75 2b 52 00 38d+03:27:06.416 READ DMA
c8 00 08 07 52 2b 52 00 38d+03:27:06.384 READ DMA
c8 00 08 df a3 27 52 00 38d+03:27:06.368 READ DMA
c8 00 08 3f c6 2a 52 00 38d+03:27:06.352 READ DMA
Error 55 occurred at disk power-on lifetime: 41853 hours (1743 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 57 72 25 52 Error: UNC 7 sectors at LBA = 0x02257257 = 36008535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 57 72 25 52 00 38d+03:26:56.928 READ DMA
c8 00 08 87 80 25 52 00 38d+03:26:56.928 READ DMA
c8 00 08 57 72 25 52 00 38d+03:26:55.184 READ DMA
c8 00 08 af a7 27 52 00 38d+03:26:55.152 READ DMA
c8 00 08 47 74 2a 52 00 38d+03:26:55.136 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 24331 -
# 2 Extended offline Completed without error 00% 24019 -
# 3 Short offline Completed without error 00% 24018 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Den Selbsttest macht die Disk selber in Abständen, wenn dann Zugriffe stattfinden pausiert der Test!
