Brauche "Reklamations"-Beratung: Toshiba MQ01ABD100 neu und gebr. mit 1 def. Sektor.

Hitachi hat mir heute um 12:13Uhr geantwortet (Toshiba übrigens auch so schnell, von Seagate habe ich nur mal Werbung geschickt bekommen und dann nie wieder was gehört, WD meldet sich oft sehr spät, einmal erst nach 1-2 Monaten):

"Thank you for contacting our HGST Technical Support Center Europe. The drive looks like it is in pre failure mode and needs to be replaced. The read error rate stores data to the rate of hardware read errors that occurred when reading from a disk surface and they could be variable and random depending on the data or the read head failure. This is most likely a mechanical error of the drive. What is the serial number of this drive if you want HGST to check the warranty status of this drive? You can also go online by entering the serial number of the drive into the HGST website:

http://www.hgst.com/portal/site/en/support/warranty/#step_three"

Ich hatte unter anderem gefragt, wieso der Wert in den beiden screenshots in ID#1 von der hohen Zahl auf 7 abgesunken ist und wieso nach dem langen Test der eine Wert von 0 auf über 220.000 angestiegen ist. Zwei screenshots hatte ich mitgeschickt.
 
Alternate 4
Zurück
Oben