ComputerBase Menü
Aktuelles

Funktionierende Festplatte wird nach BIOS nicht mehr erkannt

P

PhoenixGT

Newbie
Registriert
Dez. 2015
Beiträge
5
Hey

Mein PC kann nicht mehr von der Systemplatte Booten.
Darauf hin hab ich die Platte ausgebaut und eine Datensicherung gemacht, erfolgreich, d.h. die Platte funktioniert noch!
Platte wieder eingebaut, Windows CD eingelegt, von CD gebootet, Windows Setup findet keine Festplatte!

Hirnon's Boot CD eingelegt, sowohl Windows als auch Linux von CD gestartet, es wird keine Festplatte gefunden.
Auch meine anderen Festplatten werden nicht erkannt, egal auf welchem Anschluss, es sei denn man schließt sie über einen sata-usb Adapter und nicht direkt an.

Jetzt würde ich normalerweise sagen, da ist der sata Controller am Mainboard defekt, aber:
-Im BIOS werden alle angeschlossenen Platten noch richtig erkannt
-Das CD Laufwerk ist ja ebenfalls über Sata angeschlossen und von dem lässt sich Booten.

Gibt es eine schlüssige Erklärung?
Ist das ein Treiber Problem?
Der Treiber für den Sata Controller würde aber doch auf die Festplatte installiert, was deren Funktion voraussetzt?!
 
Danke f[r die erste Antwort!
Ja, Bios ist bereits auf Werkeinstellung, aktuell vermutlich nicht mehr, es wurde noch nie aktualisiert.

Die letzte Aenderung am System war das Update auf Windows10 vor ca einem Monat, die Hardware ist seit Jahren unveraendert.

Mainboard ist ein MSI MS7379
 
Linux starten und die Ausgabe von dmesg und sudo fdisk -l posten.
 
Hat sich vielleicht nur ein Stecker des SATA Kabels gelöst? Vielleicht ist aber auch die Platte kaputt, das kann auch mal spontan vorkommen. Welche Platte ist es denn genau?
 
fdisk -l ergibt keine Ausgabe, da ich keine disk angeben kann

~# dmesg
res 51/84:15:03:69:22/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4539.808038] ata3.00: status: { DRDY ERR }
[ 4539.808041] ata3.00: error: { ICRC ABRT }
[ 4539.808052] ata3: soft resetting link
[ 4539.985960] ata3.00: configured for UDMA/33
[ 4539.992163] ata3.01: configured for UDMA/100
[ 4539.994342] ata3: EH complete
[ 4540.017254] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4540.017258] ata3.00: BMDMA stat 0x65
[ 4540.017263] ata3.00: failed command: WRITE DMA
[ 4540.017271] ata3.00: cmd ca/00:80:98:68:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4540.017272] res 51/84:17:01:69:22/00:03:00:14:00/e0 Emask 0x10 (ATA bus error)
[ 4540.017276] ata3.00: status: { DRDY ERR }
[ 4540.017279] ata3.00: error: { ICRC ABRT }
[ 4540.017292] ata3: soft resetting link
[ 4540.184177] ata3.00: configured for UDMA/33
[ 4540.190128] ata3.01: configured for UDMA/100
[ 4540.192276] ata3: EH complete
[ 4540.237525] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4540.237528] ata3.00: BMDMA stat 0x66
[ 4540.237532] ata3.00: failed command: WRITE DMA
[ 4540.237539] ata3.00: cmd ca/00:80:98:6a:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4540.237541] res 51/84:10:08:6b:22/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4540.237545] ata3.00: status: { DRDY ERR }
[ 4540.237548] ata3.00: error: { ICRC ABRT }
[ 4540.237559] ata3: soft resetting link
[ 4540.400377] ata3.00: configured for UDMA/33
[ 4540.406134] ata3.01: configured for UDMA/100
[ 4540.408466] ata3: EH complete
[ 4540.462669] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4540.462673] ata3.00: BMDMA stat 0x66
[ 4540.462677] ata3.00: failed command: WRITE DMA
[ 4540.462684] ata3.00: cmd ca/00:80:98:6c:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4540.462686] res 51/84:10:08:6d:22/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4540.462691] ata3.00: status: { DRDY ERR }
[ 4540.462694] ata3.00: error: { ICRC ABRT }
[ 4540.462705] ata3: soft resetting link
[ 4540.625598] ata3.00: configured for UDMA/33
[ 4540.631131] ata3.01: configured for UDMA/100
[ 4540.633315] ata3: EH complete
[ 4540.732963] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4540.732967] ata3.00: BMDMA stat 0x65
[ 4540.732971] ata3.00: failed command: WRITE DMA
[ 4540.732978] ata3.00: cmd ca/00:80:18:72:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4540.732980] res 51/84:18:80:72:22/00:03:00:14:00/e0 Emask 0x10 (ATA bus error)
[ 4540.732984] ata3.00: status: { DRDY ERR }
[ 4540.732987] ata3.00: error: { ICRC ABRT }
[ 4540.732998] ata3: soft resetting link
[ 4540.894854] ata3.00: configured for UDMA/33
[ 4540.900134] ata3.01: configured for UDMA/100
[ 4540.902389] ata3: EH complete
[ 4540.936176] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4540.936180] ata3.00: BMDMA stat 0x65
[ 4540.936184] ata3.00: failed command: WRITE DMA
[ 4540.936192] ata3.00: cmd ca/00:80:98:73:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4540.936194] res 51/84:18:00:74:22/00:03:00:14:00/e0 Emask 0x10 (ATA bus error)
[ 4540.936198] ata3.00: status: { DRDY ERR }
[ 4540.936201] ata3.00: error: { ICRC ABRT }
[ 4540.936213] ata3: soft resetting link
[ 4541.098063] ata3.00: configured for UDMA/33
[ 4541.120122] ata3.01: configured for UDMA/100
[ 4541.122249] ata3: EH complete
[ 4541.145342] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4541.145346] ata3.00: BMDMA stat 0x65
[ 4541.145350] ata3.00: failed command: WRITE DMA
[ 4541.145357] ata3.00: cmd ca/00:80:98:73:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4541.145359] res 51/84:18:00:74:22/00:03:00:14:00/e0 Emask 0x10 (ATA bus error)
[ 4541.145363] ata3.00: status: { DRDY ERR }
[ 4541.145366] ata3.00: error: { ICRC ABRT }
[ 4541.145379] ata3: soft resetting link
[ 4541.309285] ata3.00: configured for UDMA/33
[ 4541.315143] ata3.01: configured for UDMA/100
[ 4541.317327] ata3: EH complete
[ 4541.344599] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4541.344603] ata3.00: BMDMA stat 0x65
[ 4541.344606] ata3.00: failed command: WRITE DMA
[ 4541.344614] ata3.00: cmd ca/00:80:18:75:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4541.344616] res 51/84:14:84:75:22/00:03:00:14:00/e0 Emask 0x10 (ATA bus error)
[ 4541.344620] ata3.00: status: { DRDY ERR }
[ 4541.344623] ata3.00: error: { ICRC ABRT }
[ 4541.344634] ata3: soft resetting link
[ 4541.523479] ata3.00: configured for UDMA/33
[ 4541.529133] ata3.01: configured for UDMA/100
[ 4541.531481] ata3: EH complete
[ 4541.593839] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4541.593842] ata3.00: BMDMA stat 0x65
[ 4541.593846] ata3.00: failed command: WRITE DMA
[ 4541.593853] ata3.00: cmd ca/00:80:18:78:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4541.593855] res 51/84:13:85:78:22/00:03:00:14:00/e0 Emask 0x10 (ATA bus error)
[ 4541.593859] ata3.00: status: { DRDY ERR }
[ 4541.593863] ata3.00: error: { ICRC ABRT }
[ 4541.593874] ata3: soft resetting link
[ 4541.756721] ata3.00: configured for UDMA/33
[ 4541.762131] ata3.01: configured for UDMA/100
[ 4541.764291] ata3: EH complete
[ 4541.785983] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4541.785987] ata3.00: BMDMA stat 0x65
[ 4541.785990] ata3.00: failed command: WRITE DMA
[ 4541.785998] ata3.00: cmd ca/00:80:18:78:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4541.785999] res 51/84:18:80:78:22/00:03:00:14:00/e0 Emask 0x10 (ATA bus error)
[ 4541.786012] ata3.00: status: { DRDY ERR }
[ 4541.786019] ata3.00: error: { ICRC ABRT }
[ 4541.786035] ata3: soft resetting link
[ 4541.950292] ata3.00: configured for UDMA/33
[ 4541.956134] ata3.01: configured for UDMA/100
[ 4541.958406] ata3: EH complete
[ 4542.052491] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4542.052496] ata3.00: BMDMA stat 0x66
[ 4542.052500] ata3.00: failed command: WRITE DMA
[ 4542.052508] ata3.00: cmd ca/00:80:18:b2:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4542.052510] res 51/84:50:48:b2:22/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4542.052514] ata3.00: status: { DRDY ERR }
[ 4542.052517] ata3.00: error: { ICRC ABRT }
[ 4542.052529] ata3: soft resetting link
[ 4542.216281] ata3.00: configured for UDMA/33
[ 4542.222246] ata3.01: configured for UDMA/100
[ 4542.224650] ata3: EH complete
[ 4542.277509] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4542.277512] ata3.00: BMDMA stat 0x66
[ 4542.277516] ata3.00: failed command: WRITE DMA
[ 4542.277524] ata3.00: cmd ca/00:80:98:c2:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4542.277526] res 51/84:60:b8:c2:22/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4542.277530] ata3.00: status: { DRDY ERR }
[ 4542.277533] ata3.00: error: { ICRC ABRT }
[ 4542.277544] ata3: soft resetting link
[ 4542.440389] ata3.00: configured for UDMA/33
[ 4542.446137] ata3.01: configured for UDMA/100
[ 4542.448478] ata3: EH complete
[ 4542.524025] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4542.524029] ata3.00: BMDMA stat 0x66
[ 4542.524033] ata3.00: failed command: WRITE DMA
[ 4542.524040] ata3.00: cmd ca/00:80:18:e8:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4542.524042] res 51/84:30:68:e8:22/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4542.524046] ata3.00: status: { DRDY ERR }
[ 4542.524049] ata3.00: error: { ICRC ABRT }
[ 4542.524060] ata3: soft resetting link
[ 4542.684301] ata3.00: configured for UDMA/33
[ 4542.690135] ata3.01: configured for UDMA/100
[ 4542.692476] ata3: EH complete
[ 4542.742186] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4542.742190] ata3.00: BMDMA stat 0x66
[ 4542.742193] ata3.00: failed command: WRITE DMA
[ 4542.742201] ata3.00: cmd ca/00:80:98:f7:22/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4542.742203] res 51/84:10:08:f8:22/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4542.742207] ata3.00: status: { DRDY ERR }
[ 4542.742210] ata3.00: error: { ICRC ABRT }
[ 4542.742220] ata3: soft resetting link
[ 4542.919868] ata3.00: configured for UDMA/33
[ 4542.925143] ata3.01: configured for UDMA/100
[ 4542.927330] ata3: EH complete
[ 4542.987351] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4542.987355] ata3.00: BMDMA stat 0x66
[ 4542.987358] ata3.00: failed command: WRITE DMA
[ 4542.987366] ata3.00: cmd ca/00:80:18:17:23/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4542.987368] res 51/84:30:68:17:23/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4542.987372] ata3.00: status: { DRDY ERR }
[ 4542.987375] ata3.00: error: { ICRC ABRT }
[ 4542.987387] ata3: soft resetting link
[ 4543.151280] ata3.00: configured for UDMA/33
[ 4543.173129] ata3.01: configured for UDMA/100
[ 4543.175483] ata3: EH complete
[ 4543.222162] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4543.222166] ata3.00: BMDMA stat 0x66
[ 4543.222171] ata3.00: failed command: WRITE DMA
[ 4543.222179] ata3.00: cmd ca/00:80:98:26:23/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4543.222180] res 51/84:10:08:27:23/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4543.222185] ata3.00: status: { DRDY ERR }
[ 4543.222188] ata3.00: error: { ICRC ABRT }
[ 4543.222200] ata3: soft resetting link
[ 4543.402293] ata3.00: configured for UDMA/33
[ 4543.424124] ata3.01: configured for UDMA/100
[ 4543.426256] ata3: EH complete
[ 4543.483519] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4543.483523] ata3.00: BMDMA stat 0x66
[ 4543.483528] ata3.00: failed command: WRITE DMA
[ 4543.483535] ata3.00: cmd ca/00:80:98:3e:23/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4543.483537] res 51/84:10:08:3f:23/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4543.483541] ata3.00: status: { DRDY ERR }
[ 4543.483544] ata3.00: error: { ICRC ABRT }
[ 4543.483556] ata3: soft resetting link
[ 4543.659298] ata3.00: configured for UDMA/33
[ 4543.665135] ata3.01: configured for UDMA/100
[ 4543.667259] ata3: EH complete
[ 4543.735901] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4543.735905] ata3.00: BMDMA stat 0x66
[ 4543.735909] ata3.00: failed command: WRITE DMA
[ 4543.735916] ata3.00: cmd ca/00:80:18:5e:23/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4543.735918] res 51/84:30:68:5e:23/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4543.735922] ata3.00: status: { DRDY ERR }
[ 4543.735925] ata3.00: error: { ICRC ABRT }
[ 4543.735937] ata3: soft resetting link
[ 4543.912836] ata3.00: configured for UDMA/33
[ 4543.918134] ata3.01: configured for UDMA/100
[ 4543.920304] ata3: EH complete
[ 4543.971823] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4543.971827] ata3.00: BMDMA stat 0x66
[ 4543.971831] ata3.00: failed command: WRITE DMA
[ 4543.971838] ata3.00: cmd ca/00:80:98:6d:23/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4543.971840] res 51/84:10:08:6e:23/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4543.971844] ata3.00: status: { DRDY ERR }
[ 4543.971847] ata3.00: error: { ICRC ABRT }
[ 4543.971858] ata3: soft resetting link
[ 4544.136061] ata3.00: configured for UDMA/33
[ 4544.142133] ata3.01: configured for UDMA/100
[ 4544.144537] ata3: EH complete
[ 4544.207016] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4544.207019] ata3.00: BMDMA stat 0x66
[ 4544.207022] ata3.00: failed command: WRITE DMA
[ 4544.207027] ata3.00: cmd ca/00:80:98:8b:23/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 4544.207028] res 51/84:60:b8:8b:23/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4544.207031] ata3.00: status: { DRDY ERR }
[ 4544.207033] ata3.00: error: { ICRC ABRT }
[ 4544.207041] ata3: soft resetting link
[ 4544.367290] ata3.00: configured for UDMA/33
[ 4544.373133] ata3.01: configured for UDMA/100
[ 4544.375269] ata3: EH complete
[ 4544.436516] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4544.436519] ata3.00: BMDMA stat 0x66
[ 4544.436522] ata3.00: failed command: READ DMA
[ 4544.436527] ata3.00: cmd c8/00:80:50:2e:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4544.436528] res 51/84:4f:81:2e:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4544.436531] ata3.00: status: { DRDY ERR }
[ 4544.436533] ata3.00: error: { ICRC ABRT }
[ 4544.436545] ata3: soft resetting link
[ 4544.596276] ata3.00: configured for UDMA/33
[ 4544.602176] ata3.01: configured for UDMA/100
[ 4544.604358] ata3: EH complete
[ 4544.627599] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4544.627601] ata3.00: BMDMA stat 0x66
[ 4544.627604] ata3.00: failed command: READ DMA
[ 4544.627609] ata3.00: cmd c8/00:80:50:31:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4544.627610] res 51/84:4f:81:31:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4544.627613] ata3.00: status: { DRDY ERR }
[ 4544.627615] ata3.00: error: { ICRC ABRT }
[ 4544.627626] ata3: soft resetting link
[ 4544.787271] ata3.00: configured for UDMA/33
[ 4544.794129] ata3.01: configured for UDMA/100
[ 4544.796468] ata3: EH complete
[ 4544.818788] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4544.818791] ata3.00: BMDMA stat 0x66
[ 4544.818794] ata3.00: failed command: READ DMA
[ 4544.818799] ata3.00: cmd c8/00:80:d0:33:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4544.818801] res 51/84:2f:21:34:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4544.818803] ata3.00: status: { DRDY ERR }
[ 4544.818805] ata3.00: error: { ICRC ABRT }
[ 4544.818815] ata3: soft resetting link
[ 4544.990220] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4544.990223] ata3.00: revalidation failed (errno=-5)
[ 4549.969044] ata3: soft resetting link
[ 4550.132943] ata3.00: configured for UDMA/33
[ 4550.139133] ata3.01: configured for UDMA/100
[ 4550.141538] ata3: EH complete
[ 4550.265983] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4550.265987] ata3.00: BMDMA stat 0x66
[ 4550.265992] ata3.00: failed command: READ DMA
[ 4550.266000] ata3.00: cmd c8/00:80:50:39:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4550.266002] res 51/84:4f:81:39:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4550.266013] ata3.00: status: { DRDY ERR }
[ 4550.266019] ata3.00: error: { ICRC ABRT }
[ 4550.266036] ata3: soft resetting link
[ 4550.431248] ata3.00: configured for UDMA/33
[ 4550.437136] ata3.01: configured for UDMA/100
[ 4550.439321] ata3: EH complete
[ 4550.463327] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4550.463330] ata3.00: BMDMA stat 0x66
[ 4550.463332] ata3.00: failed command: READ DMA
[ 4550.463337] ata3.00: cmd c8/00:80:50:39:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4550.463338] res 51/84:3f:91:39:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4550.463341] ata3.00: status: { DRDY ERR }
[ 4550.463343] ata3.00: error: { ICRC ABRT }
[ 4550.463355] ata3: soft resetting link
[ 4550.642292] ata3.00: configured for UDMA/33
[ 4550.664126] ata3.01: configured for UDMA/100
[ 4550.666523] ata3: EH complete
[ 4550.693555] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4550.693559] ata3.00: BMDMA stat 0x66
[ 4550.693563] ata3.00: failed command: READ DMA
[ 4550.693571] ata3.00: cmd c8/00:80:d0:42:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4550.693573] res 51/84:0f:41:43:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4550.693577] ata3.00: status: { DRDY ERR }
[ 4550.693580] ata3.00: error: { ICRC ABRT }
[ 4550.693592] ata3: soft resetting link
[ 4550.853291] ata3.00: configured for UDMA/33
[ 4550.859131] ata3.01: configured for UDMA/100
[ 4550.861331] ata3: EH complete
[ 4550.890799] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4550.890803] ata3.00: BMDMA stat 0x66
[ 4550.890808] ata3.00: failed command: READ DMA
[ 4550.890816] ata3.00: cmd c8/00:80:d0:4e:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4550.890817] res 51/84:2f:21:4f:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4550.890822] ata3.00: status: { DRDY ERR }
[ 4550.890825] ata3.00: error: { ICRC ABRT }
[ 4550.890836] ata3: soft resetting link
[ 4551.051277] ata3.00: configured for UDMA/33
[ 4551.073143] ata3.01: configured for UDMA/100
[ 4551.075277] ata3: EH complete
[ 4551.096923] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4551.096927] ata3.00: BMDMA stat 0x66
[ 4551.096931] ata3.00: failed command: READ DMA
[ 4551.096939] ata3.00: cmd c8/00:80:d0:4e:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4551.096941] res 51/84:5f:f1:4e:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4551.096945] ata3.00: status: { DRDY ERR }
[ 4551.096948] ata3.00: error: { ICRC ABRT }
[ 4551.096960] ata3: soft resetting link
[ 4551.265791] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4551.265794] ata3.00: revalidation failed (errno=-5)
[ 4556.250322] ata3: soft resetting link
[ 4556.418735] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4556.418738] ata3.00: revalidation failed (errno=-5)
[ 4561.401062] ata3: soft resetting link
[ 4561.598237] ata3.00: configured for UDMA/33
[ 4561.620355] ata3.01: configured for UDMA/100
[ 4561.622713] ata3: EH complete
[ 4561.748862] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4561.748864] ata3.00: BMDMA stat 0x66
[ 4561.748867] ata3.00: failed command: READ DMA
[ 4561.748872] ata3.00: cmd c8/00:80:50:57:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4561.748874] res 51/84:1f:b1:57:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4561.748876] ata3.00: status: { DRDY ERR }
[ 4561.748878] ata3.00: error: { ICRC ABRT }
[ 4561.748887] ata3: soft resetting link
[ 4561.927548] ata3.00: configured for UDMA/33
[ 4561.933132] ata3.01: configured for UDMA/100
[ 4561.935481] ata3: EH complete
[ 4561.959643] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4561.959647] ata3.00: BMDMA stat 0x66
[ 4561.959650] ata3.00: failed command: READ DMA
[ 4561.959658] ata3.00: cmd c8/00:80:50:57:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4561.959660] res 51/84:4f:81:57:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4561.959664] ata3.00: status: { DRDY ERR }
[ 4561.959667] ata3.00: error: { ICRC ABRT }
[ 4561.959677] ata3: soft resetting link
[ 4562.146752] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4562.146755] ata3.00: revalidation failed (errno=-5)
[ 4567.110144] ata3: soft resetting link
[ 4567.273817] ata3.00: configured for UDMA/33
[ 4567.295134] ata3.01: configured for UDMA/100
[ 4567.297357] ata3: EH complete
[ 4567.415293] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4567.415298] ata3.00: BMDMA stat 0x66
[ 4567.415302] ata3.00: failed command: READ DMA
[ 4567.415310] ata3.00: cmd c8/00:80:50:57:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4567.415312] res 51/84:00:cf:57:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4567.415316] ata3.00: status: { DRDY ERR }
[ 4567.415319] ata3.00: error: { ICRC ABRT }
[ 4567.415332] ata3: soft resetting link
[ 4567.598730] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4567.598733] ata3.00: revalidation failed (errno=-5)
[ 4572.566086] ata3: soft resetting link
[ 4572.743198] ata3.00: configured for UDMA/33
[ 4572.749132] ata3.01: configured for UDMA/100
[ 4572.751538] ata3: EH complete
[ 4572.873422] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4572.873425] ata3.00: BMDMA stat 0x66
[ 4572.873427] ata3.00: failed command: READ DMA
[ 4572.873433] ata3.00: cmd c8/00:80:50:57:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4572.873434] res 51/84:00:cf:57:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4572.873437] ata3.00: status: { DRDY ERR }
[ 4572.873439] ata3.00: error: { ICRC ABRT }
[ 4572.873447] ata3: soft resetting link
[ 4573.052511] ata3.00: configured for UDMA/33
[ 4573.058138] ata3.01: configured for UDMA/100
[ 4573.060263] ata3: EH complete
[ 4573.084582] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4573.084585] ata3.00: BMDMA stat 0x66
[ 4573.084587] ata3.00: failed command: READ DMA
[ 4573.084593] ata3.00: cmd c8/00:80:50:58:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4573.084594] res 51/84:2f:a1:58:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4573.084597] ata3.00: status: { DRDY ERR }
[ 4573.084599] ata3.00: error: { ICRC ABRT }
[ 4573.084608] ata3: soft resetting link
[ 4573.251731] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4573.251733] ata3.00: revalidation failed (errno=-5)
[ 4578.235023] ata3: soft resetting link
[ 4578.417282] ata3.00: configured for UDMA/33
[ 4578.439138] ata3.01: configured for UDMA/100
[ 4578.441262] ata3: EH complete
[ 4578.564834] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4578.564838] ata3.00: BMDMA stat 0x66
[ 4578.564842] ata3.00: failed command: READ DMA
[ 4578.564849] ata3.00: cmd c8/00:80:d0:5c:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4578.564851] res 51/84:3f:11:5d:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4578.564855] ata3.00: status: { DRDY ERR }
[ 4578.564858] ata3.00: error: { ICRC ABRT }
[ 4578.564871] ata3: soft resetting link
[ 4578.729089] ata3.00: configured for UDMA/33
[ 4578.751259] ata3.01: configured for UDMA/100
[ 4578.753514] ata3: EH complete
[ 4578.778292] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4578.778296] ata3.00: BMDMA stat 0x66
[ 4578.778300] ata3.00: failed command: READ DMA
[ 4578.778308] ata3.00: cmd c8/00:80:50:5d:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4578.778310] res 51/84:00:cf:5d:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4578.778314] ata3.00: status: { DRDY ERR }
[ 4578.778317] ata3.00: error: { ICRC ABRT }
[ 4578.778329] ata3: soft resetting link
[ 4578.940287] ata3.00: configured for UDMA/33
[ 4578.946168] ata3.01: configured for UDMA/100
[ 4578.948315] ata3: EH complete
[ 4578.971368] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4578.971372] ata3.00: BMDMA stat 0x66
[ 4578.971376] ata3.00: failed command: READ DMA
[ 4578.971384] ata3.00: cmd c8/00:80:d0:5e:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4578.971386] res 51/84:5f:f1:5e:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4578.971390] ata3.00: status: { DRDY ERR }
[ 4578.971393] ata3.00: error: { ICRC ABRT }
[ 4578.971405] ata3: soft resetting link
[ 4579.154740] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4579.154743] ata3.00: revalidation failed (errno=-5)
[ 4584.122034] ata3: soft resetting link
[ 4584.321750] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4584.321754] ata3.00: revalidation failed (errno=-5)
[ 4589.273033] ata3: soft resetting link
[ 4589.436624] ata3.00: configured for UDMA/33
[ 4589.442132] ata3.01: configured for UDMA/100
[ 4589.444332] ata3: EH complete
[ 4589.564387] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4589.564391] ata3.00: BMDMA stat 0x66
[ 4589.564395] ata3.00: failed command: READ DMA
[ 4589.564403] ata3.00: cmd c8/00:80:50:65:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4589.564404] res 51/84:00:cf:65:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4589.564409] ata3.00: status: { DRDY ERR }
[ 4589.564412] ata3.00: error: { ICRC ABRT }
[ 4589.564423] ata3: soft resetting link
[ 4589.744298] ata3.00: configured for UDMA/33
[ 4589.766221] ata3.01: configured for UDMA/100
[ 4589.768395] ata3: EH complete
[ 4589.793031] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4589.793035] ata3.00: BMDMA stat 0x66
[ 4589.793039] ata3.00: failed command: READ DMA
[ 4589.793047] ata3.00: cmd c8/00:80:d0:65:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4589.793049] res 51/84:3f:11:66:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4589.793053] ata3.00: status: { DRDY ERR }
[ 4589.793056] ata3.00: error: { ICRC ABRT }
[ 4589.793067] ata3: soft resetting link
[ 4589.976764] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4589.976767] ata3.00: revalidation failed (errno=-5)
[ 4594.944024] ata3: soft resetting link
[ 4595.123435] ata3.00: configured for UDMA/33
[ 4595.129129] ata3.01: configured for UDMA/100
[ 4595.131324] ata3: EH complete
[ 4595.247516] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4595.247520] ata3.00: BMDMA stat 0x66
[ 4595.247525] ata3.00: failed command: READ DMA
[ 4595.247532] ata3.00: cmd c8/00:80:d0:68:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4595.247534] res 51/84:5f:f1:68:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4595.247538] ata3.00: status: { DRDY ERR }
[ 4595.247541] ata3.00: error: { ICRC ABRT }
[ 4595.247554] ata3: soft resetting link
[ 4595.414723] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4595.414726] ata3.00: revalidation failed (errno=-5)
[ 4600.398045] ata3: soft resetting link
[ 4600.561298] ata3.00: configured for UDMA/33
[ 4600.567134] ata3.01: configured for UDMA/100
[ 4600.569329] ata3: EH complete
[ 4600.688943] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4600.688947] ata3.00: BMDMA stat 0x66
[ 4600.688951] ata3.00: failed command: READ DMA
[ 4600.688959] ata3.00: cmd c8/00:80:d0:68:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4600.688961] res 51/84:1f:31:69:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4600.688965] ata3.00: status: { DRDY ERR }
[ 4600.688968] ata3.00: error: { ICRC ABRT }
[ 4600.688980] ata3: soft resetting link
[ 4600.868295] ata3.00: configured for UDMA/33
[ 4600.890148] ata3.01: configured for UDMA/100
[ 4600.892289] ata3: EH complete
[ 4601.084214] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4601.084217] ata3.00: BMDMA stat 0x66
[ 4601.084220] ata3.00: failed command: READ DMA
[ 4601.084225] ata3.00: cmd c8/00:80:d0:6d:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4601.084226] res 51/84:0f:41:6e:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4601.084229] ata3.00: status: { DRDY ERR }
[ 4601.084231] ata3.00: error: { ICRC ABRT }
[ 4601.084241] ata3: soft resetting link
[ 4601.246244] ata3.00: configured for UDMA/33
[ 4601.252140] ata3.01: configured for UDMA/100
[ 4601.254574] ata3: EH complete
[ 4601.277349] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4601.277353] ata3.00: BMDMA stat 0x66
[ 4601.277357] ata3.00: failed command: READ DMA
[ 4601.277365] ata3.00: cmd c8/00:80:d0:6f:4f/00:00:00:00:00/e8 tag 0 dma 65536 in
[ 4601.277367] res 51/84:0f:41:70:4f/00:03:00:14:00/e8 Emask 0x30 (host bus error)
[ 4601.277371] ata3.00: status: { DRDY ERR }
[ 4601.277374] ata3.00: error: { ICRC ABRT }
[ 4601.277385] ata3: soft resetting link
[ 4601.437289] ata3.00: configured for UDMA/33
[ 4601.459133] ata3.01: configured for UDMA/100
[ 4601.461263] ata3: EH complete
[ 4605.169219] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4605.169224] ata3.00: BMDMA stat 0x66
[ 4605.169228] ata3.00: failed command: READ DMA
[ 4605.169236] ata3.00: cmd c8/00:08:38:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 4605.169238] res 51/84:00:3f:01:00/00:03:00:14:00/e0 Emask 0x30 (host bus error)
[ 4605.169242] ata3.00: status: { DRDY ERR }
[ 4605.169245] ata3.00: error: { ICRC ABRT }
[ 4605.169258] ata3: soft resetting link
[ 4605.332277] ata3.00: configured for UDMA/33
[ 4605.338129] ata3.01: configured for UDMA/100
[ 4605.340256] ata3: EH complete
[ 4605.819861] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4605.819864] ata3.00: BMDMA stat 0x66
[ 4605.819867] ata3.00: failed command: READ DMA EXT
[ 4605.819872] ata3.00: cmd 25/00:08:a8:82:85/00:00:4a:00:00/e0 tag 0 dma 4096 in
[ 4605.819873] res 51/84:00:af:82:85/84:00:4a:00:00/e0 Emask 0x30 (host bus error)
[ 4605.819876] ata3.00: status: { DRDY ERR }
[ 4605.819878] ata3.00: error: { ICRC ABRT }
[ 4605.819888] ata3: soft resetting link
[ 4605.987825] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4605.987829] ata3.00: revalidation failed (errno=-5)
[ 4610.970084] ata3: soft resetting link
[ 4611.149286] ata3.00: configured for UDMA/33
[ 4611.171140] ata3.01: configured for UDMA/100
[ 4611.173323] ata3: EH complete
[ 4631.298934] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4631.298938] ata3.00: BMDMA stat 0x66
[ 4631.298942] ata3.00: failed command: READ DMA
[ 4631.298950] ata3.00: cmd c8/00:40:20:6e:25/00:00:00:00:00/e0 tag 0 dma 32768 in
[ 4631.298952] res 51/84:1f:41:6e:25/84:00:4a:00:00/e0 Emask 0x30 (host bus error)
[ 4631.298956] ata3.00: status: { DRDY ERR }
[ 4631.298959] ata3.00: error: { ICRC ABRT }
[ 4631.298972] ata3: soft resetting link
[ 4631.471008] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4631.471012] ata3.00: revalidation failed (errno=-5)
[ 4636.450034] ata3: soft resetting link
[ 4636.624780] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4636.624783] ata3.00: revalidation failed (errno=-5)
[ 4636.624787] ata3.00: limiting speed to UDMA/33:PIO2
[ 4641.601037] ata3: soft resetting link
[ 4641.768737] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 4641.768740] ata3.00: revalidation failed (errno=-5)
[ 4641.768742] ata3.00: disabled
[ 4641.768748] ata3.01: failed to set xfermode (err_mask=0x40)
[ 4646.752530] ata3: soft resetting link
[ 4646.928132] ata3.01: configured for UDMA/100
[ 4646.931302] ata3: EH complete
[ 4646.931342] sd 2:0:0:0: [sdf] Unhandled error code
[ 4646.931346] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
[ 4646.931351] sd 2:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 00 25 6e 20 00 00 40 00
[ 4646.931364] end_request: I/O error, dev sdf, sector 2453024
[ 4646.931369] Buffer I/O error on device sdf1, logical block 306624
[ 4646.931375] Buffer I/O error on device sdf1, logical block 306625
[ 4646.931379] Buffer I/O error on device sdf1, logical block 306626
[ 4646.931384] Buffer I/O error on device sdf1, logical block 306627
[ 4646.931388] Buffer I/O error on device sdf1, logical block 306628
[ 4646.931392] Buffer I/O error on device sdf1, logical block 306629
[ 4646.931396] Buffer I/O error on device sdf1, logical block 306630
[ 4646.931400] Buffer I/O error on device sdf1, logical block 306631
[ 4646.932267] sd 2:0:0:0: [sdf] Unhandled error code
[ 4646.932272] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
[ 4646.932276] sd 2:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 2d 24 fb d8 00 00 60 00
[ 4646.932290] end_request: I/O error, dev sdf, sector 757398488
[ 4646.932295] Buffer I/O error on device sdf1, logical block 94674807
[ 4646.932302] Buffer I/O error on device sdf1, logical block 94674808
[ 4646.932337] sd 2:0:0:0: [sdf] READ CAPACITY(16) failed
[ 4646.932341] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
[ 4646.932346] sd 2:0:0:0: [sdf] Sense not available.
[ 4646.932361] sd 2:0:0:0: [sdf] Unhandled error code
[ 4646.932365] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
[ 4646.932369] sd 2:0:0:0: [sdf] CDB: cdb[0]=0x28: 28 00 2d 24 fb d8 00 00 08 00
[ 4646.932381] end_request: I/O error, dev sdf, sector 757398488
[ 4646.932436] sd 2:0:0:0: [sdf] READ CAPACITY failed
[ 4646.932439] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
[ 4646.932444] sd 2:0:0:0: [sdf] Sense not available.
[ 4646.932502] sd 2:0:0:0: [sdf] Asking for cache data failed
[ 4646.932505] sd 2:0:0:0: [sdf] Assuming drive cache: write through
[ 4646.932512] sdf: detected capacity change from 640135028736 to 0
Zum Vergrößern anklicken....
Ergänzung ()

@Holt

Es betrifft alle meine Festplatten 2x 640GB Western Digital (eine davon ist die Systemplatte) und eine Seagate. Alle 3 Platten funktionieren wenn ich sie in einen anderen PC oder ein ext. Festplattengehse einbaue.

Die Kabel sind auch OK

Wie gesagt, ich w[rde auf das Mainboard tippen, wenn das CD/Laufwerk auch tot w're.
 
Zuletzt bearbeitet:
wenn alle Festplatten und Laufwerke nicht mehr gehen, dann wird der SATA Controler auf dem Board einen weg haben.
 
Es sind ja eben nicht alle, CD funktioniert, nur die Platten (alle) nicht.

Gerade hat s mir unter Linux kurz die Systemplatte angezeigt, ich hab sofort neu gestartet und konnte von C: Booten, allerdings kam irgendwann ein Bluescreen und jetzt ist alles wieder beim alten
 
SATA Kabel?
 
Dann lies mal mit smartctl -A /dev/sdf die S.M.A.R.T. Werte der Platte aus und poste die, denn bei sdf gibt es ja Probleme.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

S
HDD von Western Digital wird nicht mehr erkannt - diverse Versuche schlugen fehl
2
Antworten
23
Aufrufe
1.001
redjack1000
R
S
Samsung 990 Pro wird nach Umbau nicht mehr erkannt
Antworten
15
Aufrufe
1.016
SpeedKing85
S
denis3d
Nach Mainboardtausch wird Crucial mx500 m.2 Sata nicht mehr erkannt
Antworten
19
Aufrufe
1.205
bisy
B
J
Nach Windows 11: Update KB5063878 werden SSDs nicht mehr erkannt
Antworten
15
Aufrufe
3.393
fixedwater
fixedwater
P
M2 SSD wird nicht mehr erkannt bootet nicht
2
Antworten
27
Aufrufe
1.481
nutrix
N

Passend zum Thema

Zurück
Oben

Willkommen auf ComputerBase!

Mit Werbung weiterlesen

Besuche ComputerBase wie gewohnt mit Werbung und Tracking. Die Zustimmung ist jederzeit widerrufbar.

Details im Privacy Center und in der Liste unserer Partner. Ein Widerruf ist möglich in der Datenschutzerklärung.

… oder ComputerBase Pro bestellen

Nutze ComputerBase ohne Werbebanner, Video-Ads und Werbetracking schon für 4 €/Monat oder 36 €/Jahr.

Mehr zu ComputerBase Pro

Bereits Pro-Nutzer? Hier anmelden.

Tracking: Wir und unsere 170 Partner verarbeiten personenbezogene Daten, indem wir mit auf Ihrem Gerät gespeicherten Informationen (z. B. eindeutige Kennungen in Cookies) ein Nutzungsprofil erstellen, um z. B. Anzeigen zu personalisieren. Verarbeitungszwecke: Genaue Standortdaten und Abfrage von Geräteeigenschaften zur Identifikation, Informationen auf einem Gerät speichern und/oder abrufen, Personalisierte Anzeigen und Inhalte, Anzeigen- und Inhaltsmessungen, Erkenntnisse über Zielgruppen und Produktentwicklungen.

Impressum Kontakt Datenschutz