Welcher Treiber ist der richtige

[lordg2009]

Hi, ich habe einen Heimserver.

Da ich zwei zusätzliche SATA Ports brauche, habe ich einen älteren Hostcontroller herausgekramt. Auf der Supportseite gibt es nun viele Treiber, so dass ich mir nicht sicher bin, welchen ich benutzen kann,ich will ja nichts zerschießen:

SATA Controller:
SIL3132 VER C
uname -a
Linux debian-server 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u1 x86_64 GNU/Linux

Hier die Supportseite:
http://www.siliconimage.com/support/
Unter Product auf Sil3132 klicken

Vielen Dank für eure Hilfe

 

[HominiLupus]

AW: Welcher Treiberist der richtige

Gar keiner. Dein Kernel hat den Support schon einkompiliert.

 

[lordg2009]

AW: Welcher Treiberist der richtige

Aha?
Aber die angesteclte Festplatte wird und /dev nicht aufgelistet?

 

[HominiLupus]

AW: Welcher Treiberist der richtige

Ist sata_sil24 geladen?
Was sagt kern.log?

 

[lordg2009]

AW: Welcher Treiberist der richtige

cat /var/log/kern.log | grep sata

bringt keine Ausgabe

 

[HominiLupus]

AW: Welcher Treiberist der richtige

1. Alle Fragen beantworten. Vollständig beantworten.
2. Eigeninitiative wie z.B. sata_sil24 laden.

 

[lordg2009]

AW: Welcher Treiberist der richtige

Bin gerade dabei, hab sata_sil24 geladen (modprobe) ist jetzt da (lsmod)

Im kern.log steht noch immer nichts,aber lsmod zeigt das modul jetzt an
die Festplatte ist unter /dev noch nicht aufgetaucht

Edit
Hey, ich wollte hier nimanden verärgern.
Hab jetzt mal sata_sil24 unter /etc/modules eingetragen. Vlt. hilft ein Neustart

 

[HominiLupus]

AW: Welcher Treiberist der richtige

Ein Neustart wird nicht helfen. Und irgendwas wurde ausgegeben als sata_sil24 geladen wurde. Entweder auf stdout oder kern.log

 

[lordg2009]

AW: Welcher Treiberist der richtige

Also weder nach neustart noch nach entfernen des modules mittels rmmod und anschließendem neuladen mit modprobe sata_sil24 gibt es eine ausgabe auf der konsole oder im kernel log. lsmod zeigt aber an, das sata_sil24 geladen ist und es steht auch hinter libdata neben lbahci und ahci

 

[HominiLupus]

AW: Welcher Treiberist der richtige

was sagt lspci -v welche Hardware du hast?
Die Treiber von silicon Image direkt werden dir nichts nützen: das sind Treiber für 2.6.19 oder so, 10 Jahre alt.
Entweder der kerneltreiber geht, oder es ist Essig.

 

[lordg2009]

AW: Welcher Treiberist der richtige

Vielen Dank erst mal für deine Hilfe. Ich muss leider ein paar Stunden weg. Ich schreibe heute Abend.

Ergänzung (2. Juni 2015)

Ich habe auf dem Board 6 SATA ports von Intel und noch 2 zusätzliche von SuperMicro. Die PCI Steckkarte habe ich nicht gefunden.

Hier die Ausgabe:

00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features

00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f7c34000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Kernel driver in use: snd_hda_intel

00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 05) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, medium devsel, latency 0, IRQ 55
Memory at f7c20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04)
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f7c40000 (64-bit, non-prefetchable)
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+

00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) (prog-if 02 [16550])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
I/O ports at f0c0
Memory at f7c3e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: serial

00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 05)
Subsystem: Super Micro Computer Inc Device 153a
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Memory at f7c3d000 (32-bit, non-prefetchable) [size=4K]
I/O ports at f060
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e

00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at f7c3c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 05)
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, fast devsel, latency 0, IRQ 64
Memory at f7c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Super Micro Computer Inc Device 0805
Capabilities: [a0] Power Management version 3
Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #4 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7bfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Super Micro Computer Inc Device 0805
Capabilities: [a0] Power Management version 3
Kernel driver in use: pcieport

00:1c.5 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #6 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7a00000-f7afffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Super Micro Computer Inc Device 0805
Capabilities: [a0] Power Management version 3
Kernel driver in use: pcieport

00:1c.6 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #7 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f7900000-f79fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Super Micro Computer Inc Device 0805
Capabilities: [a0] Power Management version 3
Kernel driver in use: pcieport

00:1c.7 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #8 (rev d5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f7800000-f78fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Super Micro Computer Inc Device 0805
Capabilities: [a0] Power Management version 3
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f7c3b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 05)
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 53
I/O ports at f0b0
I/O ports at f0a0
I/O ports at f090
I/O ports at f080
I/O ports at f040
Memory at f7c3a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 05)
Subsystem: Super Micro Computer Inc Device 0805
Flags: medium devsel, IRQ 18
Memory at f7c39000 (64-bit, non-prefetchable)
I/O ports at 0580
Kernel driver in use: i801_smbus

00:1f.6 Signal processing controller: Intel Corporation Lynx Point Thermal Management Controller (rev 05)
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at f7c38000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-

02:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
Subsystem: Super Micro Computer Inc Device 1533
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f7b00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at e000
Memory at f7b80000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-25-90-ff-ff-f2-92-51
Capabilities: [1a0] Transaction Processing Hints
Kernel driver in use: igb

03:00.0 PCI bridge: Tundra Semiconductor Corp. Device 8113 (rev 01) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7a00000-f7afffff
Capabilities: [60] Subsystem: Super Micro Computer Inc Device 0805
Capabilities: [a0] Power Management version 3

04:01.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 10)
Subsystem: D-Link System Inc DGE-528T Gigabit Ethernet Adapter
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
I/O ports at d000
Memory at f7a25000 (32-bit, non-prefetchable)
Expansion ROM at f7a00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: r8169

04:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at f7a24000 (32-bit, non-prefetchable) [size=2K]
Memory at f7a20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Kernel driver in use: firewire_ohci

05:00.0 USB controller: Renesas Technology Corp. Device 0015 (rev 02) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at f7900000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Latency Tolerance Reporting
Kernel driver in use: xhci_hcd

06:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device 0805
Flags: bus master, fast devsel, latency 0, IRQ 54
I/O ports at c050
I/O ports at c040
I/O ports at c030
I/O ports at c020
I/O ports at c000
Memory at f7800000 (32-bit, non-prefetchable)
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Legacy Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: ahci

Ergänzung (2. Juni 2015)

Ich habe gerade im BIOS rumgeschaut. Da kann man für jeden Slot Legacy oder UEFI wählen. Kann es etwas damit zu tun haben?