Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden. Du solltest ein Upgrade durchführen oder einen alternativen Browser verwenden.
Hallo,allerseits zusammen folgendes Problem ich habe ein ASrock H61Cafe mit einem Intel Core i5 2400 das Mainboard hat 4 Slot und Trägt laut Hersteller maximal 4GB also insgesamt 16GB komischerweise habe ich einen 8GB Riegel im 4GB Slot und einen anderen 4GB Riegel im anderen 4GB Slot drinnen und es läuft daher frage ich mich ob 32GB laufen würden
Entweder ich bin blöd, oder ich sehe nicht, wo 4x4 stehen soll.
/edit: Das ist was ich sehe.
- Dual Channel DDR3 memory technology
- 4 x DDR3 DIMM slots
- Supports DDR3 1600/1333/1066 non-ECC, un-buffered memory
- Max. capacity of system memory: 16GB*
- Supports Intel® Extreme Memory Profile (XMP) 1.3 / 1.2 with Intel® Ivy Bridge CPU
*Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS. For Windows® 64-bit OS with 64-bit CPU, there is no such limitation.
**This motherboard supports two double-sided or four single-sided DIMMs. Therefore, if you install four DDR3 DIMMs, you can only adopt four single-sided DIMMs.
***The highest supported DRAM frequency depends on the CPU you've installed. For detailed CPU specifications, please refer to Intel® official website.
http://www.asrock.com/mb/Intel/H61iCafe/?cat=Memory aus der Liste geht hervor, dass auch bestimmte 8GB Riegel erlaubt sind. Mit mehr als 16GB wird das Board allerdings laut Spezifikation trotzdem nicht umgehn können.
Genau, der H61 kann nur 4 Ranks. Also entweder 4x4GB Single Rank oder 2x8GB Dual Rank.
Von dem verbauen 8GB Modul wird einfach das zweite Rank ignoriert, deswegen läuft es als 4GB Modul.
This motherboard supports two double-sided or four single-sided DIMMs. Therefore, if you install four DDR3 DIMMs, you can only adopt four single-sided DIMMs.
8GB single rank gibt es aktuell noch nicht und vermutlich laufen sie auf einem alten Sandybrige Board eh nicht, da die Adressierung für 8Gbit Chips erst mit Broadwell gefixt wurde.