(hoffe ich) aber ich kann ja nochmals ein anderes drauf machen falls das net geht. Weiß aber gar net was die Geil VS für Chips drauf haben.
Genie BIOS Settings:
FSB Bus Frequency - 260
LDT/FSB Frequency Ration - 16 -16
CPU/FSB Frequency Ratio - x10
PCI eXpress Frequency - 105Mhz
CPU VID StartUp Value - 1.55
CPU VID Control - 1.475v
CPU VID Special Control - Avove VID * 110%
LDT Voltage Control - 1.40v
Chip Set Voltage Control - 1.70v
DRAM Voltage Control - 2.90v
DRAM Configuration Settings:
DRAM Frequency Set - 200 (DRAM/FSB:1/01)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 07 Bus Clocks
Row refresh cyc time (Trfc) - 12 Bus Clocks
Row to Row delay (Trrd) - 01 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 01 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - 0388 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled
DQS Skew Control - Decrease skew
DQS Skew Value - 10
DRAM Drive Strength - Level 8
DRAM Data Drive Strength - Level 4
Max Async Latency - 07.0
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(8 Bursts)
..... 2 Std. Primestable ohne Probleme oder Fehler! 
)
stummerwinter schrieb:
)!
stummerwinter schrieb:
)
, meinst du du kannst mir noch auf den post nr. 68 von mir ein paar fragen beantworten?
