Videos ruckeln seit neuestem - Linux Mint 19.1

[Exarkuns]

Das ein "*" Wildcard bedeutet wusste ich. Er zeigt ja an was er alles deinstallieren will und man muss es erst bestätigen. Nur dachte ich das es wohl so sein muss. Hat wohl nicht gestimmt.

Zurück zu meinem Hauptrechner:
Es gab seither keine mpv.conf im Homeverzeichnis. Habe ich im entsprechenden Pfad angelegt mit:
vo=gpu
hwdec=vaapi

Damit geht leider nichts mehr:
Playing: video.mp4
(+) Video --vid=1 (*) (h264 1280x720 25.000fps)
(+) Audio --aid=1 --alang=und (*) (aac 2ch 48000Hz)
[vo] Video output gpu not found!
Error opening/initializing the selected video_out (--vo) device.
Video: no video
Exiting... (Errors when loading file)

mit --vo vaapi läuft das Video ohne Errors

Benutzt MPV in irgendeinem Fall meine GPU?

 

[Iapetos]

Was für eine GPU steckt in deinem Hauptrechner? Sind die entsprechenden Mesa-Pakete installiert?

 

[Exarkuns]

Wie schon geschrieben steckt in meinem Hauptrechner eine AMD RX 570. CPU ist ein i5 6600.

Spoiler: mesa all

apt list mesa
Auflistung... Fertig
libd3dadapter9-mesa/bionic-updates 20.0.8-0ubuntu1~18.04.1 amd64
libd3dadapter9-mesa-dev/bionic-updates 20.0.8-0ubuntu1~18.04.1 amd64
libegl-mesa0/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [installiert]
libegl1-mesa/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [installiert]
libegl1-mesa-dev/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [Installiert,automatisch]
libgl1-mesa-dev/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [installiert]
libgl1-mesa-dri/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 i386 [installiert]
libgl1-mesa-glx/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 i386 [Installiert,automatisch]
libglapi-mesa/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 i386 [Installiert,automatisch]
libgles2-mesa/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [installiert]
libgles2-mesa-dev/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [Installiert,automatisch]
libglu1-mesa/bionic,now 9.0.0-2.1build1 i386 [Installiert,automatisch]
libglu1-mesa-dev/bionic,now 9.0.0-2.1build1 amd64 [Installiert,automatisch]
libglw1-mesa/bionic 8.0.0-1.1 amd64
libglw1-mesa-dev/bionic 8.0.0-1.1 amd64
libglx-mesa0/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [installiert]
libosmesa6/bionic-updates 20.0.8-0ubuntu1~18.04.1 amd64
libosmesa6-dev/bionic-updates 20.0.8-0ubuntu1~18.04.1 amd64
libwayland-egl1-mesa/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [installiert]
mesa-common-dev/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [Installiert,automatisch]
mesa-opencl-icd/bionic-updates 20.0.8-0ubuntu1~18.04.1 amd64
mesa-utils/bionic,now 8.4.0-1 amd64 [installiert]
mesa-utils-extra/bionic 8.4.0-1 amd64
mesa-va-drivers/bionic-updates,now 20.0.8-0ubuntu1~18.04.1 amd64 [installiert]
mesa-vdpau-drivers/bionic-updates 20.0.8-0ubuntu1~18.04.1 amd64
mesa-vulkan-drivers/bionic-updates 20.0.8-0ubuntu1~18.04.1 amd64
mir-client-platform-mesa-dev/bionic 0.31.1-0ubuntu1 amd64
mir-client-platform-mesa5/bionic 0.31.1-0ubuntu1 amd64
mir-platform-graphics-mesa-kms13/bionic 0.31.1-0ubuntu1 amd64
mir-platform-graphics-mesa-x13/bionic 0.31.1-0ubuntu1 amd64

Spoiler: vainfo

libva info: VA-API version 1.1.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/radeonsi_drv_video.so
libva info: Found init function __vaDriverInit_1_1
libva info: va_openDriver() returns 0
vainfo: VA-API version: 1.1 (libva 2.1.0)
vainfo: Driver version: Mesa Gallium driver 20.0.8 for AMD Radeon (TM) RX 470 Graphics (POLARIS10, DRM 3.35.0, 5.4.0-58-generic, LLVM 10.0.0)
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileVC1Simple : VAEntrypointVLD
VAProfileVC1Main : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice
VAProfileH264Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointEncSlice
VAProfileH264High : VAEntrypointVLD
VAProfileH264High : VAEntrypointEncSlice
VAProfileHEVCMain : VAEntrypointVLD
VAProfileHEVCMain : VAEntrypointEncSlice
VAProfileHEVCMain10 : VAEntrypointVLD
VAProfileJPEGBaseline : VAEntrypointVLD
VAProfileNone : VAEntrypointVideoProc

Irgendwas stimmt doch hier nicht. An meinem HT-PC (um den das eigentlich die ganze Zeit ging) läuft jetzt zwar wieder alles. Aber wenn ich genau hinschaue dann läuft vaapi. Und wenn ich dort auch
vo=gpu
hwdec=vaapi
in die mpv.conf schreibe dann gibt es auch nur einen Error.

 

[ghecko]

versuch mal hwdec=vaapi-copy

Meine mpv.conf sieht so aus:

CPU-Last ist minimal, bringt also wirklich was.

 

[Exarkuns]

nein, das bringt nix. (hwdec=vaapi-copy vo=gpu)
Kommt derselbe Error:
[vo] Video output gpu not found!
Error opening/initializing the selected video_out (--vo) device.
Video: no video

Eventuell libegl* libgles* , libnvidia-gl-* zb libnvidia-gl-390 deinstallieren via Bug in Ubuntu

ich habe mir diese Bugs auch schon angeschaut. Das Packet libnvidia-gl-390 habe ich nicht.
Jedoch libglvnd0/libegl1. Aber das kann ich nicht deinstallieren, weil da hängt so viel dran was gebraucht wird. z.B. Cinnamon usw.

Komisch ist doch das es auf beiden Linux Mint 19 Rechnern das gleiche Problem gibt. Mit unterschiedlicher Hardware.

 

[ghecko]

[vo] Video output gpu not found!

Ja, das ist seltsam. Unter Xubuntu habe ich keine derartigen Probleme, ich frage mich was Mint hier im Grafikstack anstellt.

 

[lokon]

[vo] Video output gpu not found!

Bei mpv gibt es relativ viele Änderungen (auch bei den ganzen Video-Stack : Mesa ...) - bei Mint 19 ist ja das LTS von Bionic vorbild - d.h. ältere mpv version 0.27 vgl. zu aktuellen 0.33 zB (quelle: https://packages.ubuntu.com/search?keywords=mpv)
Es verändern sich auch die Kommandozeilenargumente.

mpv -vo help -> listet mögliche optionen - iirc vo=opengl war es vor vo=gpu

man mpv / mpv -help -> --list-options list all mpv options
mpv --list-options , dort |grep gpu
zB mpv -gpu-context help ?
oder -gpu-debug ...

Eigentlich liefert Linux sehr viele Informationen mit - aber wenn die nicht gepostet werden, ist das eher ein Rätseln von unserer Seite.

• komplette dmesg Ausgabe -> Werden alle Treiber vom Kernel geladen (DRM/KMS funktioniert)
• xorg / wayland Logs -> Welche module/treiber werden benutzt (kein llvmpipe sondern hardwarerender)
• sind überhaupt die Distributionen und Versionen der Programme "gleich" (mpv Kommandozeilenoptionen oben)

AMD RX 570. CPU ist ein i5 6600

- Bei mehreren Grafikkarten (iGPU+ dGPU) gibt es die Möglichkeit über den device Pfad oder DRI_PRIME=1 zu wechseln : das funktioniert bei Diagnosetools und bei mpv - evtl. auch als Kommandozeilenoption -> hilfe (vainfo -help )

- Bei mehreren Grafikkarten und/oder mehreren Monitoren gibt es vielleicht seltsame Bugs, weil es eine exotischere Konfiguration ist - prinzipiell funktioniert bei neueren Kernel aber die Beschleunigung von dGPU und Ausgabe über iGPU - keine Ahnung ob das bei mint/bionic auch klappt

- funktioniert es mit neuerer Live-CD Distribution oder PPA (mc3man/mpv-tests - hat für bionic die 0.33)

 

[Exarkuns]

Hauptrechner:
Tatsächlich läuft auf Linux Mint 19 nur die MPV Version 0.27:
[cplayer] mpv 0.27.2 (C) 2000-2017 mpv/MPlayer/mplayer2 projects
Optionen für vo=:
$ mpv --vo=help
Available video outputs:
opengl : Extended OpenGL Renderer
vdpau : VDPAU with X11
wayland : Wayland SHM video output
xv : X11/Xv
sdl : SDL 2.0 Renderer
vaapi : VA API with X11
x11 : X11 (slow, old crap)
null : Null video output
image : Write video frames to image files
tct : true-color terminals
caca : libcaca
drm : Direct Rendering Manager

vo=gpu gibt es gar nicht.

Eigentlich liefert Linux sehr viele Informationen mit - aber wenn die nicht gepostet werden, ist das eher ein Rätseln von unserer Seite.

Ich liefere gerne alle nötigen Infos. Nur weiß ich nicht was gebraucht wird oder wie es abgerufen wird.

Spoiler: dmesg

[ 0.000000] microcode: microcode updated early to revision 0xe2, date = 2020-07-14
[ 0.000000] Linux version 5.4.0-58-generic (buildd@lgw01-amd64-040) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #64~18.04.1-Ubuntu SMP Wed Dec 9 17:11:11 UTC 2020 (Ubuntu 5.4.0-58.64~18.04.1-generic 5.4.73)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=f8148836-e338-41a2-8016-6183497bfcfa ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000664c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000664c6000-0x00000000664c6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000664c7000-0x00000000664f0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000664f1000-0x0000000066543fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000066544000-0x0000000066b79fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000066b7a000-0x0000000086e50fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000086e51000-0x00000000877affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000877b0000-0x0000000087f99fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000087f9a000-0x0000000087ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x0000000087ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002757fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x653ed018-0x6540a057] usable ==> usable
[ 0.000000] e820: update [mem 0x653ed018-0x6540a057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000653ed017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000653ed018-0x000000006540a057] usable
[ 0.000000] reserve setup_data: [mem 0x000000006540a058-0x00000000664c5fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000664c6000-0x00000000664c6fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000664c7000-0x00000000664f0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000664f1000-0x0000000066543fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000066544000-0x0000000066b79fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000066b7a000-0x0000000086e50fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000086e51000-0x00000000877affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000877b0000-0x0000000087f99fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000087f9a000-0x0000000087ffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000087fff000-0x0000000087ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088000000-0x00000000880fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000002757fffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x87f2d000 ACPI 2.0=0x87f2d000 SMBIOS=0xf05e0 MPS=0xfc410
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B150M-HDV, BIOS P1.30 11/09/2015
[ 0.000000] tsc: Detected 3300.000 MHz processor
[ 0.001309] tsc: Detected 3299.994 MHz TSC
[ 0.001309] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001310] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001315] last_pfn = 0x275800 max_arch_pfn = 0x400000000
[ 0.001317] MTRR default type: write-back
[ 0.001318] MTRR fixed ranges enabled:
[ 0.001319] 00000-9FFFF write-back
[ 0.001319] A0000-BFFFF uncachable
[ 0.001320] C0000-FFFFF write-protect
[ 0.001320] MTRR variable ranges enabled:
[ 0.001321] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.001322] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.001323] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.001323] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.001324] 4 base 008A000000 mask 7FFE000000 uncachable
[ 0.001324] 5 base 0089000000 mask 7FFF000000 uncachable
[ 0.001325] 6 base 0088800000 mask 7FFF800000 uncachable
[ 0.001325] 7 disabled
[ 0.001326] 8 disabled
[ 0.001326] 9 disabled
[ 0.001592] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001711] last_pfn = 0x88000 max_arch_pfn = 0x400000000
[ 0.007659] found SMP MP-table at [mem 0x000fc690-0x000fc69f]
[ 0.007672] check: Scanning 1 areas for low memory corruption
[ 0.007677] Using GB pages for direct mapping
[ 0.008168] secureboot: Secure boot disabled
[ 0.008168] RAMDISK: [mem 0x29455000-0x2d66ffff]
[ 0.008175] ACPI: Early table checksum verification disabled
[ 0.008177] ACPI: RSDP 0x0000000087F2D000 000024 (v02 ALASKA)
[ 0.008179] ACPI: XSDT 0x0000000087F2D0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008183] ACPI: FACP 0x0000000087F50560 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.008187] ACPI: DSDT 0x0000000087F2D1F0 02336A (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.008189] ACPI: FACS 0x0000000087F99F80 000040
[ 0.008191] ACPI: APIC 0x0000000087F50670 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.008193] ACPI: FPDT 0x0000000087F506F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008194] ACPI: FIDT 0x0000000087F50740 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008196] ACPI: MCFG 0x0000000087F507E0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.008198] ACPI: HPET 0x0000000087F50820 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.008200] ACPI: SSDT 0x0000000087F50858 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.008202] ACPI: LPIT 0x0000000087F50BC8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.008204] ACPI: SSDT 0x0000000087F50C60 00002B (v02 INTEL UsbCTabl 00001000 INTL 20120913)
[ 0.008206] ACPI: DBGP 0x0000000087F50C90 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.008207] ACPI: DBG2 0x0000000087F50CC8 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.008209] ACPI: SSDT 0x0000000087F50D20 000615 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.008211] ACPI: AAFT 0x0000000087F51338 000258 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.008213] ACPI: SSDT 0x0000000087F51590 005212 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.008215] ACPI: UEFI 0x0000000087F567A8 000042 (v01 00000000 00000000)
[ 0.008217] ACPI: SSDT 0x0000000087F567F0 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.008219] ACPI: BGRT 0x0000000087F57648 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008221] ACPI: DMAR 0x0000000087F57680 000070 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.008222] ACPI: ASF! 0x0000000087F576F0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.008229] ACPI: Local APIC address 0xfee00000
[ 0.008374] No NUMA configuration found
[ 0.008375] Faking a node at [mem 0x0000000000000000-0x00000002757fffff]
[ 0.008383] NODE_DATA(0) allocated [mem 0x2757d5000-0x2757fffff]
[ 0.008569] Zone ranges:
[ 0.008569] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008570] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008571] Normal [mem 0x0000000100000000-0x00000002757fffff]
[ 0.008572] Device empty
[ 0.008572] Movable zone start for each node
[ 0.008574] Early memory node ranges
[ 0.008575] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.008576] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.008576] node 0: [mem 0x0000000000100000-0x00000000664c5fff]
[ 0.008577] node 0: [mem 0x00000000664f1000-0x0000000066543fff]
[ 0.008577] node 0: [mem 0x0000000066b7a000-0x0000000086e50fff]
[ 0.008578] node 0: [mem 0x0000000087fff000-0x0000000087ffffff]
[ 0.008578] node 0: [mem 0x0000000100000000-0x00000002757fffff]
[ 0.008690] Zeroed struct page in unavailable ranges: 16498 pages
[ 0.008691] Initmem setup node 0 [mem 0x0000000000001000-0x00000002757fffff]
[ 0.008692] On node 0 totalpages: 2080654
[ 0.008692] DMA zone: 64 pages used for memmap
[ 0.008693] DMA zone: 25 pages reserved
[ 0.008693] DMA zone: 3997 pages, LIFO batch:0
[ 0.008730] DMA32 zone: 8544 pages used for memmap
[ 0.008731] DMA32 zone: 546801 pages, LIFO batch:63
[ 0.016059] Normal zone: 23904 pages used for memmap
[ 0.016060] Normal zone: 1529856 pages, LIFO batch:63
[ 0.029560] ACPI: PM-Timer IO Port: 0x1808
[ 0.029561] ACPI: Local APIC address 0xfee00000
[ 0.029566] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.029567] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.029567] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.029567] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.029593] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.029594] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.029595] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.029596] ACPI: IRQ0 used by override.
[ 0.029597] ACPI: IRQ9 used by override.
[ 0.029598] Using ACPI (MADT) for SMP configuration information
[ 0.029599] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.029604] e820: update [mem 0x84ec7000-0x84f07fff] usable ==> reserved
[ 0.029611] TSC deadline timer available
[ 0.029611] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.029626] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.029627] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.029628] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.029628] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.029629] PM: Registered nosave memory: [mem 0x653ed000-0x653edfff]
[ 0.029630] PM: Registered nosave memory: [mem 0x6540a000-0x6540afff]
[ 0.029631] PM: Registered nosave memory: [mem 0x664c6000-0x664c6fff]
[ 0.029632] PM: Registered nosave memory: [mem 0x664c7000-0x664f0fff]
[ 0.029633] PM: Registered nosave memory: [mem 0x66544000-0x66b79fff]
[ 0.029634] PM: Registered nosave memory: [mem 0x84ec7000-0x84f07fff]
[ 0.029635] PM: Registered nosave memory: [mem 0x86e51000-0x877affff]
[ 0.029636] PM: Registered nosave memory: [mem 0x877b0000-0x87f99fff]
[ 0.029636] PM: Registered nosave memory: [mem 0x87f9a000-0x87ffefff]
[ 0.029637] PM: Registered nosave memory: [mem 0x88000000-0x880fffff]
[ 0.029638] PM: Registered nosave memory: [mem 0x88100000-0xdfffffff]
[ 0.029638] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.029638] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.029639] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.029639] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.029639] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.029640] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.029640] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.029641] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.029641] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.029642] [mem 0x88100000-0xdfffffff] available for PCI devices
[ 0.029643] Booting paravirtualized kernel on bare hardware
[ 0.029645] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.029650] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.029754] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.029758] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.029759] pcpu-alloc: [0] 0 1 2 3
[ 0.029779] Built 1 zonelists, mobility grouping on. Total pages: 2048117
[ 0.029779] Policy zone: Normal
[ 0.029780] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=f8148836-e338-41a2-8016-6183497bfcfa ro quiet splash vt.handoff=1
[ 0.030126] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.030272] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.030307] mem auto-init: stackff, heap allocn, heap freeff
[ 0.032753] Calgary: detecting Calgary via BIOS EBDA area
[ 0.032755] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.046184] Memory: 7471744K/8322616K available (14339K kernel code, 2407K rwdata, 4904K rodata, 2700K init, 4996K bss, 850872K reserved, 0K cma-reserved)
[ 0.046189] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
[ 0.046285] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.046296] Kernel/User page tables isolation: enabled
[ 0.046305] ftrace: allocating 44249 entries in 173 pages
[ 0.059952] rcu: Hierarchical RCU implementation.
[ 0.059953] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.059954] Tasks RCU enabled.
[ 0.059954] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.059955] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.062056] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.062465] random: crng done (trusting CPU's manufacturer)
[ 0.062492] spurious 8259A interrupt: IRQ7.
[ 0.062510] vt handoff: transparent VT on vt#1
[ 0.062517] Console: colour dummy device 80x25
[ 0.062520] printk: console [tty0] enabled
[ 0.062533] ACPI: Core revision 20190816
[ 0.062759] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.062856] APIC: Switch to symmetric I/O mode setup
[ 0.062857] DMAR: Host address width 39
[ 0.062858] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.062861] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.062862] DMAR: RMRR base: 0x00000087552000 end: 0x00000087571fff
[ 0.062863] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.062864] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.062864] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.062865] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.064181] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.064181] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.068419] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086885] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f9146cb80a, max_idle_ns: 440795296911 ns
[ 0.086888] Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.98 BogoMIPS (lpj=13199976)
[ 0.086890] pid_max: default: 32768 minimum: 301
[ 0.097825] LSM: Security Framework initializing
[ 0.097832] Yama: becoming mindful.
[ 0.097852] AppArmor: AppArmor initialized
[ 0.097884] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.097894] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.097905] * VALIDATE tmpfs *
[ 0.098010] * VALIDATE proc *
[ 0.098044] * VALIDATE cgroup1 *
[ 0.098045] * VALIDATE cgroup2 *
[ 0.098092] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.098108] process: using mwait in idle threads
[ 0.098110] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.098110] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.098112] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.098113] Spectre V2 : Mitigation: Full generic retpoline
[ 0.098113] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.098114] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.098115] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.098116] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.098118] TAA: Mitigation: Clear CPU buffers
[ 0.098120] SRBDS: Mitigation: Microcode
[ 0.098120] MDS: Mitigation: Clear CPU buffers
[ 0.098314] Freeing SMP alternatives memory: 40K
[ 0.100018] smpboot: CPU0: Intel(R) Core(TM) i5-6600 CPU @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.100116] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.100120] ... version: 4
[ 0.100121] ... bit width: 48
[ 0.100121] ... generic registers: 8
[ 0.100122] ... value mask: 0000ffffffffffff
[ 0.100122] ... max period: 00007fffffffffff
[ 0.100122] ... fixed-purpose events: 3
[ 0.100123] ... event mask: 00000007000000ff
[ 0.100150] rcu: Hierarchical SRCU implementation.
[ 0.100869] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.100907] smp: Bringing up secondary CPUs ...
[ 0.100965] x86: Booting SMP configuration:
[ 0.100966] .... node #0, CPUs: #1 #2 #3
[ 0.104643] smp: Brought up 1 node, 4 CPUs
[ 0.104643] smpboot: Max logical packages: 1
[ 0.104643] smpboot: Total of 4 processors activated (26399.95 BogoMIPS)
[ 0.104643] devtmpfs: initialized
[ 0.104643] x86/mm: Memory block size: 128MB
[ 0.107014] PM: Registering ACPI NVS region [mem 0x664c6000-0x664c6fff] (4096 bytes)
[ 0.107014] PM: Registering ACPI NVS region [mem 0x877b0000-0x87f99fff] (8298496 bytes)
[ 0.107019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.107019] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.107019] pinctrl core: initialized pinctrl subsystem
[ 0.107095] PM: RTC time: 11:00:19, date: 2020-12-28
[ 0.107175] NET: Registered protocol family 16
[ 0.107237] audit: initializing netlink subsys (disabled)
[ 0.107241] audit: type=2000 audit(1609153219.044:1): state=initialized audit_enabled=0 res=1
[ 0.107241] EISA bus registered
[ 0.107241] cpuidle: using governor ladder
[ 0.107241] cpuidle: using governor menu
[ 0.107241] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.107241] ACPI: bus type PCI registered
[ 0.107241] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.107241] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.107241] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.107241] PCI: Using configuration type 1 for base access
[ 0.107241] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.107942] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.107942] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.107942] ACPI: Added _OSI(Module Device)
[ 0.107942] ACPI: Added _OSI(Processor Device)
[ 0.107942] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.107942] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107942] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.107942] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.107942] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.141727] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.144141] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.147177] ACPI: Dynamic OEM Table Load:
[ 0.147182] ACPI: SSDT 0xFFFF89A7EB493000 0006C3 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.148492] ACPI: \PR.CPU0: _OSC native thermal LVT Acked
[ 0.150013] ACPI: Dynamic OEM Table Load:
[ 0.150017] ACPI: SSDT 0xFFFF89A7EB52C000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.151791] ACPI: Dynamic OEM Table Load:
[ 0.151795] ACPI: SSDT 0xFFFF89A7EB494800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.153273] ACPI: Dynamic OEM Table Load:
[ 0.153273] ACPI: SSDT 0xFFFF89A7EB52A400 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.154158] ACPI: Interpreter enabled
[ 0.154188] ACPI: (supports S0 S3 S4 S5)
[ 0.154188] ACPI: Using IOAPIC for interrupt routing
[ 0.154265] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.155175] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.161644] ACPI: Power Resource [WRST] (off)
[ 0.161970] ACPI: Power Resource [WRST] (off)
[ 0.162295] ACPI: Power Resource [WRST] (off)
[ 0.162614] ACPI: Power Resource [WRST] (off)
[ 0.162934] ACPI: Power Resource [WRST] (off)
[ 0.163258] ACPI: Power Resource [WRST] (off)
[ 0.163597] ACPI: Power Resource [WRST] (off)
[ 0.163916] ACPI: Power Resource [WRST] (off)
[ 0.164233] ACPI: Power Resource [WRST] (off)
[ 0.164553] ACPI: Power Resource [WRST] (off)
[ 0.164874] ACPI: Power Resource [WRST] (off)
[ 0.165202] ACPI: Power Resource [WRST] (off)
[ 0.165549] ACPI: Power Resource [WRST] (off)
[ 0.165891] ACPI: Power Resource [WRST] (off)
[ 0.166212] ACPI: Power Resource [WRST] (off)
[ 0.166530] ACPI: Power Resource [WRST] (off)
[ 0.166849] ACPI: Power Resource [WRST] (off)
[ 0.167168] ACPI: Power Resource [WRST] (off)
[ 0.167486] ACPI: Power Resource [WRST] (off)
[ 0.167806] ACPI: Power Resource [WRST] (off)
[ 0.179460] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.179465] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.180960] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.180960] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.181679] PCI host bridge to bus 0000:00
[ 0.181680] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.181681] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.181682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.181683] pci_bus 0000:00: root bus resource [mem 0x88800000-0xdfffffff window]
[ 0.181683] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.181684] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.181692] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.182001] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.182040] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.182288] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.182307] pci 0000:00:14.0: reg 0x10: [mem 0xdff00000-0xdff0ffff 64bit]
[ 0.182364] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.182505] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.182523] pci 0000:00:14.2: reg 0x10: [mem 0xdff1a000-0xdff1afff 64bit]
[ 0.182681] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.182697] pci 0000:00:16.0: reg 0x10: [mem 0xdff19000-0xdff19fff 64bit]
[ 0.182742] pci 0000:00:16.0: PME# supported from D3hot
[ 0.182892] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.182906] pci 0000:00:17.0: reg 0x10: [mem 0xdff14000-0xdff15fff]
[ 0.182911] pci 0000:00:17.0: reg 0x14: [mem 0xdff18000-0xdff180ff]
[ 0.182917] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.182923] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.182928] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.182934] pci 0000:00:17.0: reg 0x24: [mem 0xdff17000-0xdff177ff]
[ 0.182968] pci 0000:00:17.0: PME# supported from D3hot
[ 0.183113] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.183175] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.183365] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[ 0.183427] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.183598] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[ 0.183661] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.183834] pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
[ 0.184061] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.184073] pci 0000:00:1f.2: reg 0x10: [mem 0xdff10000-0xdff13fff]
[ 0.184242] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.184301] pci 0000:00:1f.4: reg 0x10: [mem 0xdff16000-0xdff160ff 64bit]
[ 0.184370] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.184603] pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
[ 0.184621] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.184628] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.184633] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.184638] pci 0000:01:00.0: reg 0x24: [mem 0xdfe00000-0xdfe3ffff]
[ 0.184643] pci 0000:01:00.0: reg 0x30: [mem 0xdfe40000-0xdfe5ffff pref]
[ 0.184655] pci 0000:01:00.0: BAR 0: assigned to efifb
[ 0.184692] pci 0000:01:00.0: supports D1 D2
[ 0.184693] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.184753] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
[ 0.184767] pci 0000:01:00.1: reg 0x10: [mem 0xdfe60000-0xdfe63fff 64bit]
[ 0.184826] pci 0000:01:00.1: supports D1 D2
[ 0.184884] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.184886] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.184887] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.184890] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.184954] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.185044] pci 0000:03:00.0: [10b5:8112] type 01 class 0x060400
[ 0.185283] pci 0000:00:1c.6: PCI bridge to [bus 03-04]
[ 0.185285] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.185326] pci_bus 0000:04: extended config space not accessible
[ 0.185353] pci 0000:04:04.0: [13f6:8788] type 00 class 0x040100
[ 0.185375] pci 0000:04:04.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.185475] pci 0000:04:04.0: supports D1 D2
[ 0.185554] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.185558] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
[ 0.185656] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.185677] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.185695] pci 0000:05:00.0: reg 0x18: [mem 0xdfd00000-0xdfd00fff 64bit]
[ 0.185707] pci 0000:05:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref]
[ 0.185790] pci 0000:05:00.0: supports D1 D2
[ 0.185791] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.185922] pci 0000:00:1c.7: PCI bridge to [bus 05]
[ 0.185924] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.185925] pci 0000:00:1c.7: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.185928] pci 0000:00:1c.7: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.188194] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.188248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.188299] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.188351] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.188402] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.188453] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.188504] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.188555] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.190898] iommu: Default domain type: Translated
[ 0.191009] SCSI subsystem initialized
[ 0.191018] libata version 3.00 loaded.
[ 0.191018] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.191018] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.191018] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.191018] vgaarb: loaded
[ 0.191018] ACPI: bus type USB registered
[ 0.191018] usbcore: registered new interface driver usbfs
[ 0.191018] usbcore: registered new interface driver hub
[ 0.191018] usbcore: registered new device driver usb
[ 0.191018] pps_core: LinuxPPS API ver. 1 registered
[ 0.191018] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.191018] PTP clock support registered
[ 0.191018] EDAC MC: Ver: 3.0.0
[ 0.191018] Registered efivars operations
[ 0.191018] PCI: Using ACPI for IRQ routing
[ 0.219516] PCI: pci_cache_line_size set to 64 bytes
[ 0.219558] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.219559] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.219560] e820: reserve RAM buffer [mem 0x653ed018-0x67ffffff]
[ 0.219561] e820: reserve RAM buffer [mem 0x664c6000-0x67ffffff]
[ 0.219561] e820: reserve RAM buffer [mem 0x66544000-0x67ffffff]
[ 0.219562] e820: reserve RAM buffer [mem 0x84ec7000-0x87ffffff]
[ 0.219562] e820: reserve RAM buffer [mem 0x86e51000-0x87ffffff]
[ 0.219563] e820: reserve RAM buffer [mem 0x275800000-0x277ffffff]
[ 0.219632] NetLabel: Initializing
[ 0.219633] NetLabel: domain hash size = 128
[ 0.219633] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.219643] NetLabel: unlabeled traffic allowed by default
[ 0.219653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.219653] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.221410] clocksource: Switched to clocksource tsc-early
[ 0.227362] * VALIDATE bpf *
[ 0.227414] VFS: Disk quotas dquot_6.6.0
[ 0.227425] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.227443] * VALIDATE ramfs *
[ 0.227445] * VALIDATE hugetlbfs *
[ 0.227502] AppArmor: AppArmor Filesystem Enabled
[ 0.227520] pnp: PnP ACPI init
[ 0.227849] system 00:00: [io 0x0280-0x028f] has been reserved
[ 0.227850] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.227851] system 00:00: [io 0x02a0-0x02af] has been reserved
[ 0.227852] system 00:00: [io 0x02b0-0x02bf] has been reserved
[ 0.227855] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228079] pnp 00:01: [dma 0 disabled]
[ 0.228108] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.228158] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228752] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.228753] system 00:03: [io 0xffff] has been reserved
[ 0.228754] system 00:03: [io 0xffff] has been reserved
[ 0.228755] system 00:03: [io 0xffff] has been reserved
[ 0.228755] system 00:03: [io 0x1800-0x18fe] has been reserved
[ 0.228756] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.228758] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228835] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.228837] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228851] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228882] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.228884] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.229105] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.229106] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.229107] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.229108] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.229109] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.229110] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.229111] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.229112] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.229113] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.229113] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.229116] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229149] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.229150] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.229151] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.229152] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.229153] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.229153] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.229154] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.229156] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229415] system 00:09: [io 0xff00-0xfffe] has been reserved
[ 0.229418] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230478] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.230479] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.230480] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.230483] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231282] pnp: PnP ACPI: found 11 devices
[ 0.232127] thermal_sys: Registered thermal governor 'fair_share'
[ 0.232128] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.232128] thermal_sys: Registered thermal governor 'step_wise'
[ 0.232128] thermal_sys: Registered thermal governor 'user_space'
[ 0.232129] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.236617] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.236643] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.236645] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.236647] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.236649] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.236651] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.236658] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.236660] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
[ 0.236676] pci 0000:00:1c.6: PCI bridge to [bus 03-04]
[ 0.236678] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.236684] pci 0000:00:1c.7: PCI bridge to [bus 05]
[ 0.236685] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.236687] pci 0000:00:1c.7: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.236689] pci 0000:00:1c.7: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.236693] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.236694] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.236695] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.236695] pci_bus 0000:00: resource 7 [mem 0x88800000-0xdfffffff window]
[ 0.236696] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.236697] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.236697] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.236698] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.236699] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.236700] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.236700] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.236701] pci_bus 0000:05: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.236702] pci_bus 0000:05: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref]
[ 0.236847] NET: Registered protocol family 2
[ 0.236958] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.236989] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.237083] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.237145] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.237166] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.237182] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.237216] NET: Registered protocol family 1
[ 0.237219] NET: Registered protocol family 44
[ 0.238333] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.238337] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.238348] PCI: CLS 0 bytes, default 64
[ 0.238400] Trying to unpack rootfs image as initramfs...
[ 0.981860] Freeing initrd memory: 67692K
[ 0.998916] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.998920] software IO TLB: mapped [mem 0x613ed000-0x653ed000] (64MB)
[ 0.999109] check: Scanning for low memory corruption every 60 seconds
[ 0.999405] Initialise system trusted keyrings
[ 0.999414] Key type blacklist registered
[ 0.999433] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.000329] zbud: loaded
[ 1.000584] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.000681] fuse: init (API version 7.31)
[ 1.000691] * VALIDATE fuse *
[ 1.000692] * VALIDATE fuse *
[ 1.000753] Platform Keyring initialized
[ 1.003061] Key type asymmetric registered
[ 1.003062] Asymmetric key parser 'x509' registered
[ 1.003068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.003094] io scheduler mq-deadline registered
[ 1.003334] pcieport 0000:00:01.0: PME: Signaling with IRQ 121
[ 1.003480] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 1.003629] pcieport 0000:00:1c.6: PME: Signaling with IRQ 123
[ 1.003783] pcieport 0000:00:1c.7: PME: Signaling with IRQ 124
[ 1.003841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.003876] efifb: probing for efifb
[ 1.003886] efifb: showing boot graphics
[ 1.005524] efifb: framebuffer at 0xc0000000, using 9000k, total 9000k
[ 1.005524] efifb: mode is 1920x1200x32, linelength=7680, pages=1
[ 1.005525] efifb: scrolling: redraw
[ 1.005526] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.005549] fbcon: Deferring console take-over
[ 1.005550] fb0: EFI VGA frame buffer device
[ 1.005555] intel_idle: MWAIT substates: 0x142120
[ 1.005555] intel_idle: v0.4.1 model 0x5E
[ 1.005709] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.005837] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 1.005850] ACPI: Sleep Button [SLPB]
[ 1.005871] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.005881] ACPI: Power Button [PWRB]
[ 1.005898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.005917] ACPI: Power Button [PWRF]
[ 1.006356] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.027177] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.028623] Linux agpgart interface v0.103
[ 1.029888] loop: module loaded
[ 1.030008] libphy: Fixed MDIO Bus: probed
[ 1.030009] tun: Universal TUN/TAP device driver, 1.6
[ 1.030042] PPP generic driver version 2.4.2
[ 1.030179] VFIO - User Level meta-driver version: 0.3
[ 1.030372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.030375] ehci-pci: EHCI PCI platform driver
[ 1.030381] ehci-platform: EHCI generic platform driver
[ 1.030386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.030386] ohci-pci: OHCI PCI platform driver
[ 1.030391] ohci-platform: OHCI generic platform driver
[ 1.030396] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.030517] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.030521] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.031581] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 1.031635] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.031768] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.031769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.031769] usb usb1: Product: xHCI Host Controller
[ 1.031770] usb usb1: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[ 1.031771] usb usb1: SerialNumber: 0000:00:14.0
[ 1.031951] hub 1-0:1.0: USB hub found
[ 1.031965] hub 1-0:1.0: 12 ports detected
[ 1.032938] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.032940] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.032941] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.032965] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.032966] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.032966] usb usb2: Product: xHCI Host Controller
[ 1.032967] usb usb2: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[ 1.032968] usb usb2: SerialNumber: 0000:00:14.0
[ 1.033116] hub 2-0:1.0: USB hub found
[ 1.033124] hub 2-0:1.0: 6 ports detected
[ 1.033638] i8042: PNP: No PS/2 controller found.
[ 1.033727] mousedev: PS/2 mouse device common for all mice
[ 1.033885] rtc_cmos 00:05: RTC can wake from S4
[ 1.034336] rtc_cmos 00:05: registered as rtc0
[ 1.034344] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.034348] i2c /dev entries driver
[ 1.034376] device-mapper: uevent: version 1.0.3
[ 1.034442] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.034454] platform eisa.0: Probing EISA bus 0
[ 1.034455] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.034456] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.034457] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.034458] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.034458] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.034459] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.034459] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.034460] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.034461] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.034461] platform eisa.0: EISA: Detected 0 cards
[ 1.034463] intel_pstate: Intel P-state driver initializing
[ 1.034703] intel_pstate: HWP enabled
[ 1.034749] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.034750] EFI Variables Facility v0.08 2004-May-17
[ 1.040357] intel_pmc_core INT33A1:00: initialized
[ 1.040411] drop_monitor: Initializing network drop monitor service
[ 1.040564] NET: Registered protocol family 10
[ 1.044869] Segment Routing with IPv6
[ 1.044895] NET: Registered protocol family 17
[ 1.044984] Key type dns_resolver registered
[ 1.045429] RAS: Correctable Errors collector initialized.
[ 1.045448] microcode: sig=0x506e3, pf=0x2, revision=0xe2
[ 1.045559] microcode: Microcode Update Driver: v2.2.
[ 1.045562] IPI shorthand broadcast: enabled
[ 1.045579] sched_clock: Marking stable (1044997198, 560240)->(1051002056, -5444618)
[ 1.045737] registered taskstats version 1
[ 1.045743] Loading compiled-in X.509 certificates
[ 1.046258] Loaded X.509 cert 'Build time autogenerated kernel key: 5606a97af838f1ba65062ffc95e6c7ba61ff2bfe'
[ 1.046276] zswap: loaded using pool lzo/zbud
[ 1.046327] Key type ._fscrypt registered
[ 1.046328] Key type .fscrypt registered
[ 1.050678] Key type big_key registered
[ 1.052503] Key type encrypted registered
[ 1.052505] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.053142] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 1.053173] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[ 1.053173] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 1.053593] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.054157] ima: No TPM chip found, activating TPM-bypass!
[ 1.054161] ima: Allocated hash algorithm: sha1
[ 1.054165] ima: No architecture policies found
[ 1.054171] evm: Initialising EVM extended attributes:
[ 1.054172] evm: security.selinux
[ 1.054172] evm: security.SMACK64
[ 1.054172] evm: security.SMACK64EXEC
[ 1.054172] evm: security.SMACK64TRANSMUTE
[ 1.054173] evm: security.SMACK64MMAP
[ 1.054173] evm: security.apparmor
[ 1.054173] evm: security.ima
[ 1.054174] evm: security.capability
[ 1.054174] evm: HMAC attrs: 0x1
[ 1.054992] PM: Magic number: 0:270:25
[ 1.055039] memory memory65: hash matches
[ 1.055169] rtc_cmos 00:05: setting system clock to 2020-12-28T11:00:20 UTC (1609153220)
[ 1.056135] Freeing unused decrypted memory: 2040K
[ 1.056473] Freeing unused kernel image memory: 2700K
[ 1.075284] Write protecting the kernel read-only data: 22528k
[ 1.075801] Freeing unused kernel image memory: 2008K
[ 1.076062] Freeing unused kernel image memory: 1240K
[ 1.082105] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.082105] x86/mm: Checking user space page tables
[ 1.087896] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.087897] Run /init as init process
[ 1.152298] ahci 0000:00:17.0: version 3.0
[ 1.153366] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.153370] r8169 0000:05:00.0: enabling device (0000 -> 0003)
[ 1.158572] libphy: r8169: probed
[ 1.158736] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl, d0:50:99:9b:62:f8, XID 2c9, IRQ 127
[ 1.158737] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.162670] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.162672] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 1.166765] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 1.190549] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.190550] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.219826] [drm] amdgpu kernel modesetting enabled.
[ 1.219871] CRAT table not found
[ 1.219874] Virtual CRAT table created for CPU
[ 1.219875] Parsing CRAT table with 1 nodes
[ 1.219876] Creating topology SYSFS entries
[ 1.219881] Topology: Add CPU node
[ 1.219882] Finished initializing topology
[ 1.219929] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xc0000000 -> 0xcfffffff
[ 1.219930] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xd0000000 -> 0xd01fffff
[ 1.219931] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xdfe00000 -> 0xdfe3ffff
[ 1.219932] checking generic (c0000000 8ca000) vs hw (c0000000 10000000)
[ 1.219932] fb0: switching to amdgpudrmfb from EFI VGA
[ 1.219972] amdgpu 0000:01:00.0: vgaarb: deactivate vga console
[ 1.220124] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x174B:0xE347 0xCF).
[ 1.220130] [drm] register mmio base: 0xDFE00000
[ 1.220131] [drm] register mmio size: 262144
[ 1.220136] [drm] add ip block number 0 <vi_common>
[ 1.220136] [drm] add ip block number 1 <gmc_v8_0>
[ 1.220137] [drm] add ip block number 2 <tonga_ih>
[ 1.220137] [drm] add ip block number 3 <gfx_v8_0>
[ 1.220138] [drm] add ip block number 4 <sdma_v3_0>
[ 1.220138] [drm] add ip block number 5 <powerplay>
[ 1.220139] [drm] add ip block number 6 <dm>
[ 1.220139] [drm] add ip block number 7 <uvd_v6_0>
[ 1.220140] [drm] add ip block number 8 <vce_v3_0>
[ 1.220314] amdgpu 0000:01:00.0: No more image in the PCI ROM
[ 1.220327] ATOM BIOS: 113-1E3470U.O60
[ 1.220336] [drm] UVD is enabled in VM mode
[ 1.220336] [drm] UVD ENC is enabled in VM mode
[ 1.220337] [drm] VCE enabled in VM mode
[ 1.220355] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 1.220377] amdgpu 0000:01:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
[ 1.220377] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[ 1.220381] [drm] Detected VRAM RAM=8192M, BAR=256M
[ 1.220381] [drm] RAM width 256bits GDDR5
[ 1.220414] [TTM] Zone kernel: Available graphics memory: 4043484 KiB
[ 1.220414] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 1.220415] [TTM] Initializing pool allocator
[ 1.220417] [TTM] Initializing DMA pool allocator
[ 1.220440] [drm] amdgpu: 8192M of VRAM memory ready
[ 1.220441] [drm] amdgpu: 5923M of GTT memory ready.
[ 1.220448] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 1.220980] [drm] PCIE GART of 256M enabled (table at 0x000000F4008CA000).
[ 1.221055] [drm] Chained IB support enabled!
[ 1.221710] amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
[ 1.221782] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[ 1.222459] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[ 1.223363] scsi host0: ahci
[ 1.223493] scsi host1: ahci
[ 1.226942] scsi host2: ahci
[ 1.234944] scsi host3: ahci
[ 1.238945] scsi host4: ahci
[ 1.239115] scsi host5: ahci
[ 1.239151] ata1: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17100 irq 126
[ 1.239152] ata2: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17180 irq 126
[ 1.239153] ata3: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17200 irq 126
[ 1.239154] ata4: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17280 irq 126
[ 1.239155] ata5: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17300 irq 126
[ 1.239156] ata6: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17380 irq 126
[ 1.276077] [drm] DM_PPLIB: values for Engine clock
[ 1.276078] [drm] DM_PPLIB: 300000
[ 1.276078] [drm] DM_PPLIB: 466000
[ 1.276079] [drm] DM_PPLIB: 751000
[ 1.276079] [drm] DM_PPLIB: 1019000
[ 1.276079] [drm] DM_PPLIB: 1074000
[ 1.276079] [drm] DM_PPLIB: 1126000
[ 1.276080] [drm] DM_PPLIB: 1169000
[ 1.276080] [drm] DM_PPLIB: 1260000
[ 1.276080] [drm] DM_PPLIB: Validation clocks:
[ 1.276081] [drm] DM_PPLIB: engine_max_clock: 126000
[ 1.276081] [drm] DM_PPLIB: memory_max_clock: 200000
[ 1.276081] [drm] DM_PPLIB: level : 8
[ 1.276082] [drm] DM_PPLIB: values for Memory clock
[ 1.276082] [drm] DM_PPLIB: 300000
[ 1.276082] [drm] DM_PPLIB: 2000000
[ 1.276083] [drm] DM_PPLIB: Validation clocks:
[ 1.276083] [drm] DM_PPLIB: engine_max_clock: 126000
[ 1.276083] [drm] DM_PPLIB: memory_max_clock: 200000
[ 1.276083] [drm] DM_PPLIB: level : 8
[ 1.303247] [drm] Display Core initialized with v3.2.48!
[ 1.317189] [drm] SADs count is: -2, don't need to read it
[ 1.317205] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.317205] [drm] Driver supports precise vblank timestamp query.
[ 1.343956] [drm] UVD and UVD ENC initialized successfully.
[ 1.370940] usb 1-8: new high-speed USB device number 2 using xhci_hcd
[ 1.444264] [drm] VCE initialized successfully.
[ 1.445478] kfd kfd: Allocated 3969056 bytes on gart
[ 1.446116] Virtual CRAT table created for GPU
[ 1.446117] Parsing CRAT table with 1 nodes
[ 1.446121] Creating topology SYSFS entries
[ 1.446168] Topology: Add dGPU node [0x67df:0x1002]
[ 1.446169] kfd kfd: added device 1002:67df
[ 1.447791] [drm] fb mappable at 0xC0DFA000
[ 1.447791] [drm] vram apper at 0xC0000000
[ 1.447792] [drm] size 9216000
[ 1.447792] [drm] fb depth is 24
[ 1.447792] [drm] pitch is 7680
[ 1.447871] fbcon: amdgpudrmfb (fb0) is primary device
[ 1.447871] fbcon: Deferring console take-over
[ 1.447872] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[ 1.482927] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:01:00.0 on minor 0
[ 1.519140] usb 1-8: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 1.519141] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.519142] usb 1-8: Product: USB 2.0 Hub
[ 1.519558] hub 1-8:1.0: USB hub found
[ 1.519587] hub 1-8:1.0: 4 ports detected
[ 1.551214] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.551228] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.551241] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.551269] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.551280] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.551293] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.551715] ata1.00: HPA detected: current 250067567, native 250069680
[ 1.551796] ata1.00: ATA-9: M4-CT128M4SSD2, 0309, max UDMA/100
[ 1.551813] ata1.00: 250067567 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.552080] ata2.00: HPA detected: current 1953523055, native 1953525168
[ 1.552175] ata2.00: ATA-8: WDC WD1001FALS-00U9B0, 05.00K05, max UDMA/133
[ 1.552176] ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.552206] ata1.00: configured for UDMA/100
[ 1.552330] ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133
[ 1.552398] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0309 PQ: 0 ANSI: 5
[ 1.552680] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.552744] sd 0:0:0:0: [sda] 250067567 512-byte logical blocks: (128 GB/119 GiB)
[ 1.552748] sd 0:0:0:0: [sda] Write Protect is off
[ 1.552749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.552768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.552996] ata2.00: configured for UDMA/133
[ 1.553150] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 0K05 PQ: 0 ANSI: 5
[ 1.553329] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.553359] sd 1:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.553384] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.553385] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.553411] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.553748] ata4.00: configured for UDMA/133
[ 1.555878] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5
[ 1.580600] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.581029] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.594154] sdb: sdb1 sdb2 < sdb5 >
[ 1.594851] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.623014] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.623016] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.639545] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.639594] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.646942] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 1.802028] usb 1-9: New USB device found, idVendor=046d, idProduct=c223, bcdDevice= 1.03
[ 1.802029] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.802043] usb 1-9: Product: Logitech G15 Keyboard
[ 1.802044] usb 1-9: Manufacturer: Logitech
[ 1.802929] hub 1-9:1.0: USB hub found
[ 1.803295] hub 1-9:1.0: 4 ports detected
[ 1.978923] usb 1-8.4: new high-speed USB device number 4 using xhci_hcd
[ 2.015059] tsc: Refined TSC clocksource calibration: 3311.999 MHz
[ 2.015063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd936b72f, max_idle_ns: 440795283163 ns
[ 2.015113] clocksource: Switched to clocksource tsc
[ 2.180995] usb 1-8.4: New USB device found, idVendor=04f9, idProduct=0225, bcdDevice= 1.00
[ 2.181010] usb 1-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.181011] usb 1-8.4: Product: DCP-395CN
[ 2.181012] usb 1-8.4: Manufacturer: Brother
[ 2.181012] usb 1-8.4: SerialNumber: BROA0F278522
[ 2.187480] usb-storage 1-8.4:1.2: USB Mass Storage device detected
[ 2.187765] scsi host6: usb-storage 1-8.4:1.2
[ 2.187817] usbcore: registered new interface driver usb-storage
[ 2.188676] usbcore: registered new interface driver uas
[ 2.307194] usb 1-10: new low-speed USB device number 5 using xhci_hcd
[ 2.362888] raid6: avx2x4 gen() 39161 MB/s
[ 2.410888] raid6: avx2x4 xor() 24393 MB/s
[ 2.458889] raid6: avx2x2 gen() 32451 MB/s
[ 2.506889] raid6: avx2x2 xor() 21599 MB/s
[ 2.554889] raid6: avx2x1 gen() 27516 MB/s
[ 2.602889] raid6: avx2x1 xor() 19679 MB/s
[ 2.650890] raid6: sse2x4 gen() 16309 MB/s
[ 2.698891] raid6: sse2x4 xor() 10203 MB/s
[ 2.746889] raid6: sse2x2 gen() 14076 MB/s
[ 2.794888] raid6: sse2x2 xor() 9318 MB/s
[ 2.842889] raid6: sse2x1 gen() 12517 MB/s
[ 2.890888] raid6: sse2x1 xor() 6851 MB/s
[ 2.890889] raid6: using algorithm avx2x4 gen() 39161 MB/s
[ 2.890889] raid6: .... xor() 24393 MB/s, rmw enabled
[ 2.890890] raid6: using avx2x2 recovery algorithm
[ 2.893136] xor: automatically using best checksumming function avx
[ 2.904553] Btrfs loaded, crc32c=crc32c-intel
[ 2.976694] usb 1-10: New USB device found, idVendor=046d, idProduct=c025, bcdDevice=98.02
[ 2.976696] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.976697] usb 1-10: Product: USB-PS/2 Optical Mouse
[ 2.976711] usb 1-10: Manufacturer: B16_b_02
[ 2.980510] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.984428] usbcore: registered new interface driver usbhid
[ 2.984428] usbhid: USB HID core driver
[ 2.985774] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:046D:C025.0001/input/input3
[ 2.985950] hid-generic 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:14.0-10/input0
[ 3.051193] usb 1-9.1: new low-speed USB device number 6 using xhci_hcd
[ 3.097032] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.157192] usb 1-9.1: New USB device found, idVendor=046d, idProduct=c221, bcdDevice= 1.70
[ 3.157193] usb 1-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.157194] usb 1-9.1: Product: Logitech Gaming Keyboard
[ 3.157195] usb 1-9.1: Manufacturer: Logitech
[ 3.161067] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:046D:C221.0002/input/input4
[ 3.213247] scsi 6:0:0:0: Direct-Access Brother DCP-395CN 1.00 PQ: 0 ANSI: 2
[ 3.213505] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.219083] hid-generic 0003:046D:C221.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:14.0-9.1/input0
[ 3.222003] input: Logitech Logitech Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:046D:C221.0003/input/input5
[ 3.244051] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.263325] systemd[1]: Detected architecture x86-64.
[ 3.279193] usb 1-11: new high-speed USB device number 7 using xhci_hcd
[ 3.279615] hid-generic 0003:046D:C221.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:14.0-9.1/input1
[ 3.283965] systemd[1]: Set hostname to <ExarMint>.
[ 3.293297] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.374442] systemd[1]: Created slice System Slice.
[ 3.374507] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.374559] systemd[1]: Listening on Journal Socket.
[ 3.375019] systemd[1]: Starting Availability of block devices...
[ 3.375446] systemd[1]: Starting Set the console keyboard layout...
[ 3.375683] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.376201] systemd[1]: Mounting Kernel Debug File System...
[ 3.392605] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 3.423585] lp: driver loaded but no devices found
[ 3.426255] ppdev: user-space parallel port driver
[ 3.442484] systemd-journald[423]: Received request to flush runtime journal from PID 1
[ 3.510905] usb 1-9.4: new full-speed USB device number 8 using xhci_hcd
[ 3.599171] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.613765] usb 1-9.4: New USB device found, idVendor=046d, idProduct=c222, bcdDevice= 1.03
[ 3.613766] usb 1-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.613767] usb 1-9.4: Product: G15 Keyboard
[ 3.613768] usb 1-9.4: Manufacturer: G15 Keyboard
[ 3.616002] input: G15 Keyboard G15 Keyboard Keypad as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/0003:046D:C222.0004/input/input7
[ 3.674975] hid-generic 0003:046D:C222.0004: input,hiddev1,hidraw3: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:14.0-9.4/input0
[ 3.692450] usb 1-11: New USB device found, idVendor=041e, idProduct=4058, bcdDevice= 1.00
[ 3.692452] usb 1-11: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 3.692452] usb 1-11: Manufacturer: Creative Labs
[ 3.694956] Adding 3986428k swap on /dev/sda7. Priority:-2 extents:1 across:3986428k SSFS
[ 3.711790] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 3.711791] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.711792] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.711792] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.785068] cryptd: max_cpu_qlen set to 1000
[ 3.799457] usblp 1-8.4:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0225
[ 3.799482] usbcore: registered new interface driver usblp
[ 3.803241] AVX2 version of gcm_enc/dec engaged.
[ 3.803242] AES CTR mode by8 optimization enabled
[ 3.803287] snd_virtuoso 0000:04:04.0: enabling device (0000 -> 0001)
[ 3.806583] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.806584] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 3.836661] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 3.837629] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 3.855527] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.889145] mc: Linux media interface: v0.10
[ 3.896886] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 3.896926] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 3.896970] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 3.897001] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 3.897032] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 3.901371] videodev: Linux video capture interface: v2.00
[ 3.906940] usbcore: registered new interface driver snd-usb-audio
[ 3.949704] uvcvideo: Found UVC 1.00 device <unnamed> (041e:4058)
[ 3.950665] intel_rapl_common: Found RAPL domain package
[ 3.950666] intel_rapl_common: Found RAPL domain core
[ 3.950667] intel_rapl_common: Found RAPL domain dram
[ 3.954578] input: UVC Camera (041e:4058) as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input15
[ 3.954617] usbcore: registered new interface driver uvcvideo
[ 3.954618] USB Video Class driver (1.1.1)
[ 4.262307] audit: type=1400 audit(1609153223.699:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=715 comm="apparmor_parser"
[ 4.263045] audit: type=1400 audit(1609153223.703:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=712 comm="apparmor_parser"
[ 4.263047] audit: type=1400 audit(1609153223.703:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=712 comm="apparmor_parser"
[ 4.263048] audit: type=1400 audit(1609153223.703:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=712 comm="apparmor_parser"
[ 4.263050] audit: type=1400 audit(1609153223.703:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=712 comm="apparmor_parser"
[ 4.263154] audit: type=1400 audit(1609153223.703:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=716 comm="apparmor_parser"
[ 4.263412] audit: type=1400 audit(1609153223.703:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=711 comm="apparmor_parser"
[ 4.263414] audit: type=1400 audit(1609153223.703:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=711 comm="apparmor_parser"
[ 4.264004] audit: type=1400 audit(1609153223.703:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=718 comm="apparmor_parser"
[ 4.513374] RTL8211E Gigabit Ethernet r8169-500:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bushy_addr=r8169-500:00, irq=IGNORE)
[ 4.724382] r8169 0000:05:00.0 enp5s0: Link is Down
[ 7.125503] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 7.125512] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 7.599341] usb 1-9.4: usbfs: process 1464 (g15daemon) did not claim interface 0 before use
[ 7.599349] usb 1-9.4: usbfs: process 1464 (g15daemon) did not claim interface 0 before use
[ 7.599351] usb 1-9.4: usbfs: process 1464 (g15daemon) did not claim interface 0 before use
[ 7.599353] usb 1-9.4: usbfs: process 1464 (g15daemon) did not claim interface 0 before use
[ 7.599483] usb 1-9.4: usbfs: process 1464 (g15daemon) did not claim interface 0 before use
[ 7.600420] usb 1-9.4: usbfs: process 1465 (g15daemon) did not claim interface 0 before use
[ 7.620995] usb 1-9.4: usbfs: process 1465 (g15daemon) did not claim interface 0 before use
[ 7.621236] usb 1-9.4: usbfs: process 1465 (g15daemon) did not claim interface 0 before use
[ 7.621583] usb 1-9.4: usbfs: process 1465 (g15daemon) did not claim interface 0 before use
[ 8.082048] input: G15 Extra Keys as /devices/virtual/input/input16
[ 9.514369] usblp2: removed
[ 9.517315] usblp 1-8.4:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0225

Ich verwende nur die eine GPU: AMD RX 570. Die integrierte GPU in der CPU ist deaktiviert.

Ergänzung (28. Dezember 2020)

Spoiler: Xorg.0.log Teil1

[ 4.756]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 4.756] Build Operating System: Linux 4.15.0-124-generic x86_64 Ubuntu
[ 4.756] Current Operating System: Linux ExarMint 5.4.0-58-generic #64~18.04.1-Ubuntu SMP Wed Dec 9 17:11:11 UTC 2020 x86_64
[ 4.756] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=f8148836-e338-41a2-8016-6183497bfcfa ro quiet splash vt.handoff=1
[ 4.756] Build Date: 30 November 2020 05:59:23PM
[ 4.756] xorg-server-hwe-18.04 2:1.20.8-2ubuntu2.2~18.04.4 (For technical support please see http://www.ubuntu.com/support)
[ 4.756] Current version of pixman: 0.34.0
[ 4.756] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.756] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.756] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 28 12:00:24 2020
[ 4.757] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.757] (==) No Layout section. Using the first Screen section.
[ 4.757] (==) No screen section available. Using defaults.
[ 4.757] (**) |-->Screen "Default Screen Section" (0)
[ 4.757] (**) | |-->Monitor "<default monitor>"
[ 4.757] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.757] (==) Automatically adding devices
[ 4.757] (==) Automatically enabling devices
[ 4.757] (==) Automatically adding GPU devices
[ 4.757] (==) Automatically binding GPU devices
[ 4.757] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.757] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.757] Entry deleted from font path.
[ 4.757] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.757] Entry deleted from font path.
[ 4.757] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.757] Entry deleted from font path.
[ 4.757] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.757] Entry deleted from font path.
[ 4.757] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.757] Entry deleted from font path.
[ 4.757] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4.757] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.757] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.757] (II) Loader magic: 0x5606cc353020
[ 4.757] (II) Module ABI versions:
[ 4.757] X.Org ANSI C Emulation: 0.4
[ 4.757] X.Org Video Driver: 24.1
[ 4.757] X.Org XInput driver : 24.1
[ 4.757] X.Org Server Extension : 10.0
[ 4.757] (++) using VT number 7

[ 4.757] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.758] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.768] (--) PCI:*(1@0:0:0) 1002:67df:174b:e347 rev 207, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdfe00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 4.768] (II) LoadModule: "glx"
[ 4.768] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.774] (II) Module glx: vendor="X.Org Foundation"
[ 4.774] compiled for 1.20.8, module version = 1.0.0
[ 4.774] ABI class: X.Org Server Extension, version 10.0
[ 4.774] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 4.774] loading driver: amdgpu
[ 4.774] (==) Matched amdgpu as autoconfigured driver 0
[ 4.774] (==) Matched ati as autoconfigured driver 1
[ 4.774] (==) Matched modesetting as autoconfigured driver 2
[ 4.774] (==) Matched fbdev as autoconfigured driver 3
[ 4.774] (==) Matched vesa as autoconfigured driver 4
[ 4.774] (==) Assigned the driver to the xf86ConfigLayout
[ 4.774] (II) LoadModule: "amdgpu"
[ 4.774] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 4.778] (II) Module amdgpu: vendor="X.Org Foundation"
[ 4.778] compiled for 1.20.5, module version = 19.1.0
[ 4.778] Module class: X.Org Video Driver
[ 4.778] ABI class: X.Org Video Driver, version 24.0
[ 4.778] (II) LoadModule: "ati"
[ 4.778] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 4.778] (II) Module ati: vendor="X.Org Foundation"
[ 4.778] compiled for 1.20.5, module version = 19.1.0
[ 4.778] Module class: X.Org Video Driver
[ 4.778] ABI class: X.Org Video Driver, version 24.0
[ 4.783] (II) LoadModule: "modesetting"
[ 4.783] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.783] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.783] compiled for 1.20.8, module version = 1.20.8
[ 4.783] Module class: X.Org Video Driver
[ 4.783] ABI class: X.Org Video Driver, version 24.1
[ 4.783] (II) LoadModule: "fbdev"
[ 4.783] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.783] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.783] compiled for 1.20.1, module version = 0.5.0
[ 4.783] Module class: X.Org Video Driver
[ 4.783] ABI class: X.Org Video Driver, version 24.0
[ 4.783] (II) LoadModule: "vesa"
[ 4.783] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.783] (II) Module vesa: vendor="X.Org Foundation"
[ 4.783] compiled for 1.20.1, module version = 2.4.0
[ 4.783] Module class: X.Org Video Driver
[ 4.783] ABI class: X.Org Video Driver, version 24.0
[ 4.783] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 4.783] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.783] (II) FBDEV: driver for framebuffer: fbdev
[ 4.783] (II) VESA: driver for VESA chipsets: vesa
[ 4.785] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 4.785] (WW) Falling back to old probe method for modesetting
[ 4.786] (WW) Falling back to old probe method for fbdev
[ 4.786] (II) Loading sub module "fbdevhw"
[ 4.786] (II) LoadModule: "fbdevhw"
[ 4.786] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.786] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.786] compiled for 1.20.8, module version = 0.0.2
[ 4.786] ABI class: X.Org Video Driver, version 24.1
[ 4.786] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.786] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 4.786] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 4.786] (==) AMDGPU(0): Default visual is TrueColor
[ 4.786] (==) AMDGPU(0): RGB weight 888
[ 4.786] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 4.786] (--) AMDGPU(0): Chipset: "AMD Radeon (TM) RX 470 Graphics" (ChipID = 0x67df)
[ 4.786] (II) Loading sub module "fb"
[ 4.786] (II) LoadModule: "fb"
[ 4.786] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.786] (II) Module fb: vendor="X.Org Foundation"
[ 4.786] compiled for 1.20.8, module version = 1.0.0
[ 4.786] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.786] (II) Loading sub module "dri2"
[ 4.786] (II) LoadModule: "dri2"
[ 4.786] (II) Module "dri2" already built-in
[ 4.850] (II) Loading sub module "glamoregl"
[ 4.850] (II) LoadModule: "glamoregl"
[ 4.850] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.858] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.858] compiled for 1.20.8, module version = 1.0.1
[ 4.858] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.881] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon (TM) RX 470 Graphics (POLARIS10, DRM 3.35.0, 5.4.0-58-generic, LLVM 10.0.0)
[ 4.881] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 4.881] (==) AMDGPU(0): TearFree property default: auto
[ 4.881] (==) AMDGPU(0): VariableRefresh: disabled
[ 4.881] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 4.881] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 4.881] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 4.881] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 4.881] (II) AMDGPU(0): Output HDMI-A-1 has no monitor section
[ 4.881] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[ 4.883] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 4.883] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 4.883] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 4.883] (II) AMDGPU(0): EDID for output HDMI-A-1
[ 4.883] (II) AMDGPU(0): EDID for output DVI-D-0
[ 4.883] (II) AMDGPU(0): Manufacturer: SAM Model: 2b6 Serial#: 1213542964
[ 4.883] (II) AMDGPU(0): Year: 2008 Week: 40
[ 4.883] (II) AMDGPU(0): EDID Version: 1.3
[ 4.883] (II) AMDGPU(0): Digital Display Input
[ 4.883] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 4.883] (II) AMDGPU(0): Gamma: 2.60
[ 4.883] (II) AMDGPU(0): DPMS capabilities: Off
[ 4.883] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4.883] (II) AMDGPU(0): First detailed timing is preferred mode
[ 4.883] (II) AMDGPU(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607
[ 4.883] (II) AMDGPU(0): blueX: 0.144 blueY: 0.075 whiteX: 0.312 whiteY: 0.329
[ 4.883] (II) AMDGPU(0): Supported established timings:
[ 4.883] (II) AMDGPU(0): 720x400@70Hz
[ 4.883] (II) AMDGPU(0): 640x480@60Hz
[ 4.883] (II) AMDGPU(0): 640x480@67Hz
[ 4.883] (II) AMDGPU(0): 640x480@72Hz
[ 4.883] (II) AMDGPU(0): 640x480@75Hz
[ 4.883] (II) AMDGPU(0): 800x600@56Hz
[ 4.883] (II) AMDGPU(0): 800x600@60Hz
[ 4.883] (II) AMDGPU(0): 800x600@72Hz
[ 4.883] (II) AMDGPU(0): 800x600@75Hz
[ 4.883] (II) AMDGPU(0): 832x624@75Hz
[ 4.883] (II) AMDGPU(0): 1024x768@60Hz
[ 4.883] (II) AMDGPU(0): 1024x768@70Hz
[ 4.883] (II) AMDGPU(0): 1024x768@75Hz
[ 4.883] (II) AMDGPU(0): 1280x1024@75Hz
[ 4.883] (II) AMDGPU(0): 1152x864@75Hz
[ 4.883] (II) AMDGPU(0): Manufacturer's mask: 0
[ 4.883] (II) AMDGPU(0): Supported standard timings:
[ 4.883] (II) AMDGPU(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 4.883] (II) AMDGPU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4.883] (II) AMDGPU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 4.883] (II) AMDGPU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4.883] (II) AMDGPU(0): Supported detailed timing:
[ 4.883] (II) AMDGPU(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 4.883] (II) AMDGPU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 4.883] (II) AMDGPU(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 4.883] (II) AMDGPU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 4.883] (II) AMDGPU(0): Monitor name: SyncMaster
[ 4.884] (II) AMDGPU(0): Serial No: HS2Q901837
[ 4.884] (II) AMDGPU(0): EDID (in hex):
[ 4.884] (II) AMDGPU(0): 00ffffffffffff004c2db60234325548
[ 4.884] (II) AMDGPU(0): 28120103803420a02a5ad1a7564b9b24
[ 4.884] (II) AMDGPU(0): 135054bfef80a94081808140714f0101
[ 4.884] (II) AMDGPU(0): 010101010101283c80a070b023403020
[ 4.884] (II) AMDGPU(0): 360006442100001a000000fd00384b1e
[ 4.884] (II) AMDGPU(0): 5111000a202020202020000000fc0053
[ 4.884] (II) AMDGPU(0): 796e634d61737465720a2020000000ff
[ 4.884] (II) AMDGPU(0): 00485332513930313833370a2020009e
[ 4.884] (II) AMDGPU(0): Printing probed modes for output DVI-D-0
[ 4.884] (II) AMDGPU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 4.884] (II) AMDGPU(0): Modeline "1920x1080"x60.0 154.00 1920 1968 2000 2080 1080 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1680x1050"x60.0 154.00 1680 1968 2000 2080 1050 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1440x900"x60.0 154.00 1440 1968 2000 2080 900 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1280x800"x60.0 154.00 1280 1968 2000 2080 800 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1280x720"x60.0 154.00 1280 1968 2000 2080 720 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.884] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.884] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 4.884] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 4.884] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 4.884] (II) AMDGPU(0): Output HDMI-A-1 disconnected
[ 4.884] (II) AMDGPU(0): Output DVI-D-0 connected
[ 4.884] (II) AMDGPU(0): Using exact sizes for initial modes
[ 4.884] (II) AMDGPU(0): Output DVI-D-0 using initial mode 1920x1200 +0+0
[ 4.884] (II) AMDGPU(0): mem size init: gart size :171c86000 vram size: s:1ff206000 visible:f206000
[ 4.884] (==) AMDGPU(0): DPI set to (96, 96)
[ 4.884] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.884] (II) Loading sub module "ramdac"
[ 4.884] (II) LoadModule: "ramdac"
[ 4.884] (II) Module "ramdac" already built-in
[ 4.884] (II) UnloadModule: "modesetting"
[ 4.884] (II) Unloading modesetting
[ 4.884] (II) UnloadModule: "fbdev"
[ 4.884] (II) Unloading fbdev
[ 4.884] (II) UnloadSubModule: "fbdevhw"
[ 4.884] (II) Unloading fbdevhw
[ 4.884] (II) UnloadModule: "vesa"
[ 4.884] (II) Unloading vesa
[ 4.885] (II) AMDGPU(0): [DRI2] Setup complete
[ 4.885] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 4.885] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 4.885] (II) AMDGPU(0): Front buffer pitch: 8192 bytes
[ 4.885] (II) AMDGPU(0): SYNC extension fences enabled
[ 4.885] (II) AMDGPU(0): Present extension enabled
[ 4.885] (==) AMDGPU(0): DRI3 enabled
[ 4.885] (==) AMDGPU(0): Backing store enabled
[ 4.885] (II) AMDGPU(0): Direct rendering enabled
[ 4.899] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 4.899] (II) AMDGPU(0): Acceleration enabled
[ 4.900] (==) AMDGPU(0): DPMS enabled
[ 4.900] (==) AMDGPU(0): Silken mouse enabled
[ 4.900] (II) AMDGPU(0): Set up textured video (glamor)
[ 4.917] (II) Initializing extension Generic Event Extension
[ 4.917] (II) Initializing extension SHAPE
[ 4.917] (II) Initializing extension MIT-SHM
[ 4.917] (II) Initializing extension XInputExtension
[ 4.918] (II) Initializing extension XTEST
[ 4.918] (II) Initializing extension BIG-REQUESTS
[ 4.919] (II) Initializing extension SYNC
[ 4.919] (II) Initializing extension XKEYBOARD
[ 4.919] (II) Initializing extension XC-MISC
[ 4.919] (II) Initializing extension SECURITY
[ 4.919] (II) Initializing extension XFIXES
[ 4.919] (II) Initializing extension RENDER
[ 4.919] (II) Initializing extension RANDR
[ 4.919] (II) Initializing extension COMPOSITE
[ 4.919] (II) Initializing extension DAMAGE
[ 4.919] (II) Initializing extension MIT-SCREEN-SAVER
[ 4.920] (II) Initializing extension DOUBLE-BUFFER
[ 4.920] (II) Initializing extension RECORD
[ 4.920] (II) Initializing extension DPMS
[ 4.920] (II) Initializing extension Present
[ 4.920] (II) Initializing extension DRI3
[ 4.920] (II) Initializing extension X-Resource
[ 4.920] (II) Initializing extension XVideo
[ 4.920] (II) Initializing extension XVideo-MotionCompensation
[ 4.920] (II) Initializing extension SELinux
[ 4.920] (II) SELinux: Disabled on system
[ 4.920] (II) Initializing extension GLX
[ 4.923] (II) AIGLX: Loaded and initialized radeonsi
[ 4.923] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.923] (II) Initializing extension XFree86-VidModeExtension
[ 4.923] (II) Initializing extension XFree86-DGA
[ 4.924] (II) Initializing extension XFree86-DRI
[ 4.924] (II) Initializing extension DRI2
[ 4.925] (II) AMDGPU(0): Setting screen physical size to 508 x 317
[ 4.992] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4.992] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.992] (II) LoadModule: "libinput"
[ 4.992] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4.997] (II) Module libinput: vendor="X.Org Foundation"
[ 4.997] compiled for 1.20.1, module version = 0.28.1
[ 4.997] Module class: X.Org XInput Driver
[ 4.997] ABI class: X.Org XInput driver, version 24.1
[ 4.997] (II) Using input driver 'libinput' for 'Power Button'
[ 4.997] (**) Power Button: always reports core events
[ 4.997] (**) Option "Device" "/dev/input/event2"
[ 4.998] (**) Option "_source" "server/udev"
[ 4.998] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 4.998] (II) event2 - Power Button: device is a keyboard
[ 4.998] (II) event2 - Power Button: device removed
[ 5.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 5.018] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.018] (**) Option "xkb_model" "pc105"
[ 5.018] (**) Option "xkb_layout" "de"
[ 5.030] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5.030] (II) event2 - Power Button: device is a keyboard
[ 5.030] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.030] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.030] (II) Using input driver 'libinput' for 'Power Button'
[ 5.030] (**) Power Button: always reports core events
[ 5.030] (**) Option "Device" "/dev/input/event1"
[ 5.030] (**) Option "_source" "server/udev"
[ 5.030] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.030] (II) event1 - Power Button: device is a keyboard
[ 5.030] (II) event1 - Power Button: device removed
[ 5.046] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"

Ergänzung (28. Dezember 2020)

Wegen des Zeichen Limits poste ich das Xorg Log als extra Datei.

 

[Iapetos]

Dann hast du ja deine vorläufige Antwort selbst geliefert: Streiche vo=gpu und setze vo=opengl.

Denke nur daran, es nach dem Update auf etwas aktuelleres wieder anzupassen.

 

[ghecko]

mpv 0.27.2

Gut, das erklärt einiges. Die Version ist steinalt.
Aktuell ist 0.33
Ich bau mir mpv immer selbst aus dem aktuellen git-master.