G
Green Mamba
Gast
Hi,
ich möchte an meiner 6800GT 2 Flatpanels betreiben. Das eine hat 1280x1024, und das andere hat 1024x768. Es soll ein großer Desktop über beide Monitore dargestellt werden. Ich hab mich schon im Netz informiert, und aus verschiedenen Anleitungen diese xorg.conf zusammengebastelt:
Damit bekomme ich allerdings auf dem ersten Monitor die falsche Auflösung von 1024x768, und der 2. zeigt mir "NO SIGNAL". Irgendwo is der Wurm drin.
Wer weiß Rat?
Viele Grüße,
Green Mamba
ich möchte an meiner 6800GT 2 Flatpanels betreiben. Das eine hat 1280x1024, und das andere hat 1024x768. Es soll ein großer Desktop über beide Monitore dargestellt werden. Ich hab mich schon im Netz informiert, und aus verschiedenen Anleitungen diese xorg.conf zusammengebastelt:
Code:
# /.../
# SaX generated X11 config file
# Created on: 2006-01-02T08:17:13+0100.
#
# Version: 4.8
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection
Section "Module"
Load "type1"
Load "dbe"
Load "freetype"
Load "glx"
Load "v4l"
Load "extmod"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "12"
Option "Device" "/dev/input/mice"
Option "Name" "PS2++ Logitech MX Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
[COLOR="Red"]Section "Monitor"
DisplaySize 340 270
HorizSync 28-48
Identifier "prodisma"
ModelName "1024X768@60HZ"
VendorName "--> VESA"
Option "DPMS"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection
Section "Monitor"
DisplaySize 340 270
HorizSync 31-64
Identifier "viewsonic"
ModelName "1280X1024@60HZ"
VendorName "--> VESA"
Option "DPMS"
VertRefresh 60-77
UseModes "Modes[1]"
EndSection
Section "Modes"
Identifier "Modes[1]"
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
Modeline "768x576" 33.74 768 792 872 976 576 577 580 596
Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1024x768" "768x576"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "1024x768" "768x576"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "1024x768" "768x576"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "768x576"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "viewsonic"
EndSection
Section "Device"
BoardName "GeForce 6800 Ultra (0x00F9)"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device[0]"
Screen 0
Option "TwinView" "on"
Option "TwinViewOrientation" "LeftOf"
Option "UseEdidFreq" "on"
Option "HorizSync" " DFP-0: 28-48;CRT-0: 57.7-82"
Option "VertRefresh" " DFP-0: 50-60;CRT-0: 60-77"
Option "MetaModes" " DFP-0: 1280x1024, DFP-1: 1024x768; DFP-0: 1280x1024, DFP-1: NULL; "
Option "Rotate" "off"
VendorName "NVidia"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
[/COLOR]
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
EndSection
Damit bekomme ich allerdings auf dem ersten Monitor die falsche Auflösung von 1024x768, und der 2. zeigt mir "NO SIGNAL". Irgendwo is der Wurm drin.
Wer weiß Rat?
Viele Grüße,
Green Mamba